Printable · GCSE Foundation · ages 14-16
Geometry and measures worksheet — GCSE Foundation
Fifteen questions across the geometry and measures statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Geometry and measures worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.The column vector r has top number 2 and bottom number 6. Which of these column vectors is parallel to r?
- 2.Work out the exact value of sin 30° + cos 60°.
- 3.A circular garden pond has a diameter of 5 m. A gardener is laying gravel around it in a ring-shaped path 1 m wide, measured outward from the edge of the pond. Work out the area of the gravel path. Use π = 3.14.
- 4.A textbook contains the instruction 'Draw AB' and, on the next line, the statement 'AB = 5 cm'. Which statement about the notation AB is correct?
- 5.Triangle T has a vertex at (8, 4). It is enlarged by a scale factor of 1/2, centre (2, 4). Work out the coordinates of the image of this vertex.
- 6.Write down the exact value of sin 45°.
- 7.A rectangle has vertices at (2, 1), (9, 1), (9, 5) and (2, 5). Work out the area of the rectangle.
- 8.Triangle ABC is similar to triangle PQR. Side AB is 8 cm and corresponds to side PQ, which is 12 cm. Side AC is 6 cm and corresponds to side PR. Work out the length of PR.
- 9.A sector of a circle has radius 9 cm and angle 120°. Using π = 3.14, work out the arc length of the sector, to 1 decimal place.
- 10.A shop sells a scale model of a van. The model and the real van are similar shapes, with lengths in the ratio 1 : 24. The model is 18.5 cm long. Work out the length of the real van, giving your answer in metres.
- 11.Vector A is and vector B is . Write down how vector B compares to vector A.
- 12.The diagram shows a cuboid. Work out the area of its front elevation, in square centimetres.
- 13.A ship's radar shows a lighthouse at the point (12, −4) on a grid measured in nautical miles. The ship is at (2, 5). The ship sails along the vector that takes it directly to the lighthouse, then sails along that same vector again. Work out the ship's final position.
- 14.A square-based pyramid has a square base and four identical triangular sloping faces, with its apex directly above the centre of the base. How many planes of symmetry does it have?
- 15.Lines AB and CD cross at a point, forming four right angles where they meet. Which notation correctly describes the relationship between AB and CD?
Answer key
- (a) (3, 9) — Two column vectors are parallel only when one is the other multiplied by a single scalar — both numbers scaled by the same factor with the same sign. r has top:bottom ratio 2:6, which simplifies to 1:3. (3, 9) has ratio 3:9, also 1:3, so (3, 9) = 1.5 × r: it is parallel to r. (6, 2) swaps the top and bottom numbers of r, giving ratio 6:2 (3:1), which is not the same ratio. (2, 3) halves only the bottom number of r, giving ratio 2:3, not 1:3. (−2, 6) changes the sign of only the top number of r, giving ratio −2:6, which no longer matches 2:6 throughout.
- (c) 1 — sin 30° = 1/2 and cos 60° = 1/2, so sin 30° + cos 60° = 1/2 + 1/2 = 1. 0 comes from subtracting the two values instead of adding them (1/2 − 1/2). 1/2 comes from writing down only one of the two exact values and forgetting to add the other. √3 comes from swapping the two angles and working out sin 60° + cos 30° = √3/2 + √3/2 = √3.
- (b) 18.84 m² — The pond has radius 2.5 m (half of the 5 m diameter), so the outer edge of the path has radius 2.5 + 1 = 3.5 m. Path area = area of outer circle − area of pond = 3.14 × 3.5² − 3.14 × 2.5² = 38.465 − 19.625 = 18.84 m².
- (c) AB means the segment or its length, shown by context — Method: recall the standard convention for a two-letter label such as AB. Working: AB names the segment AND its length; the sentence around it shows which is meant — 'draw AB' means the segment, 'AB = 5 cm' means the length. Options: 'a different symbol is needed' and 'must be written as |AB|' both describe stricter rules than the convention GCSE actually uses; 'AB can only mean the segment' ignores that the same label is also used for the length. Answer: AB means the segment or its length, shown by context.
- (a) (5, 4) — Method: find the vector from the centre to the point, multiply it by the scale factor, then add the result back to the centre. Working: the vector from (2, 4) to (8, 4) is (6, 0); multiplying by 1/2 gives (3, 0); adding this to the centre (2, 4) gives (5, 4). Options: (4, 2) comes from multiplying the original coordinates by 1/2 directly, ignoring the centre of enlargement; (14, 4) comes from using a scale factor of 2 instead of 1/2, giving (2, 4) + 2×(6, 0) = (14, 4); (8, 2) comes from halving only the y-coordinate and leaving the x-coordinate unchanged. Answer: (5, 4).
- (b) √2/2 — sin 45° = √2/2 (the same value as 1/√2, written with a rational denominator) — one of the exact values you need to know. √3/2 is the exact value of sin 60° and of cos 30°, not sin 45°. 1/2 is the exact value of sin 30° and of cos 60°. 1 is the exact value of sin 90°.
- (b) 28 — The width of the rectangle is the difference in x-coordinates, 9 − 2 = 7, and the height is the difference in y-coordinates, 5 − 1 = 4. The area is width × height = 7 × 4 = 28. 22 comes from using the perimeter formula, 2 × (7 + 4), instead of the area formula. 35 comes from multiplying 7 by 5 instead of 4, misreading one of the y-coordinates. 63 comes from multiplying 9 by 7, using an x-coordinate instead of the height.
- (c) 9 cm — The scale factor from triangle ABC to triangle PQR is PQ ÷ AB = 12 ÷ 8 = 1.5. So PR = AC × 1.5 = 6 × 1.5 = 9 cm. (4 cm comes from using the scale factor upside down, AB ÷ PQ; 10 cm comes from adding the difference between AB and PQ, 4 cm, to AC instead of scaling; 16 cm comes from multiplying PQ by the ratio AB : AC instead of scaling AC by the correct scale factor.)
- (d) 18.8 cm — Arc length is a fraction of the full circumference. Here 120 ÷ 360 = 1/3, and the full circumference is 2 × 3.14 × 9 = 56.52 cm, so the arc is 56.52 ÷ 3 = 18.84 cm, which rounds to 18.8 cm. Forgetting the fraction and giving the full circumference rounds to 56.5 cm. Using 9 cm as a diameter instead of a radius gives an arc of 9.4 cm. Using 120 ÷ 180 instead of 120 ÷ 360 for the fraction gives an arc of 37.7 cm.
- (d) 4.44 m — The real van's length is 18.5 × 24 = 444 cm, which converts to 4.44 m. '0.77 m' comes from dividing by 24 instead of multiplying, using the ratio the wrong way round (18.5 ÷ 24 = 0.77 cm), and then writing that figure down as metres. '44.4 m' comes from converting 444 cm to metres with the decimal point in the wrong place. '444 m' comes from working out 444 cm correctly but forgetting to convert it into metres at all.
- (d) B is the reverse of A — Every component of vector B is the negative of the matching component of vector A (−2 is the negative of 2, and 5 is the negative of −5), so B undoes the translation that A performs — B is the reverse of A. 'B is the same as A' ignores that both signs have flipped. 'B is twice A' confuses a sign change with a scale-factor change; the sizes of the components have not changed, only their signs. 'B is unrelated to A in direction' misses that the two vectors are directly linked, just in opposite directions.
- (c) 24 cm² — Method: the front elevation of a cuboid is a rectangle formed by the cuboid's length and its height, so its area is length × height. Working: 6 cm × 4 cm = 24 cm². Answer: 24 cm². The distractors: 12 cm² comes from using width × height (3 × 4) instead of length × height, mistaking the side elevation's dimensions for the front's. 18 cm² comes from using length × width (6 × 3), which gives the area of the plan view instead of the front elevation. 20 cm² comes from finding the perimeter of the front face instead of its area: 2 × (6 + 4) = 20.
- (b) (22, −13) — The vector from the ship to the lighthouse is (12, −4) − (2, 5) = (10, −9). Sailing along this vector twice from the start gives (2, 5) + 2 × (10, −9) = (2 + 20, 5 − 18) = (22, −13). '(12, −4)' stops after the ship reaches the lighthouse and ignores the second identical leg. '(−18, 23)' comes from finding the vector the wrong way round, as (2, 5) − (12, −4) = (−10, 9), and then doubling that. '(2, 5)' comes from adding the vector and then subtracting it again, wrongly cancelling the two legs instead of adding them.
- (d) 4 — Method: a plane of symmetry must pass through the apex and cut the base along one of the base's own lines of symmetry. Working: a square has 4 lines of symmetry (2 through opposite edge midpoints, 2 through opposite corners), and each of these, combined with the apex, gives one plane of symmetry of the pyramid. A student who answers 2 has only found the planes through the edge midpoints, or only the ones through the corners, and missed the other pair. A student who answers 8 has doubled the correct count, perhaps confusing it with a different solid. A student who answers 1 has only spotted the one obvious front-to-back plane. Answer: 4.
- (c) AB ⊥ CD — Method: match the description of the lines to the correct symbol. Working: the symbol ⊥ means 'is perpendicular to', used when two lines meet at right angles, which is exactly what is described. Options: ∥ means 'is parallel to', for lines that never meet, so it does not apply here; = compares two lengths as equal, but no lengths are mentioned; ≅ means 'is congruent to', used for whole shapes, not for describing how two lines cross. Answer: AB ⊥ CD.
Build your own mix at the worksheet builder.