Printable · GCSE Foundation · ages 14-16
Geometry and measures worksheet — GCSE Foundation
Fifteen questions across the geometry and measures statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Geometry and measures worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.A straight line crosses a pair of parallel lines. One of the co-interior (allied) angles is 118°. Work out the size of the other co-interior angle.
- 2.A ramp's sloped surface crosses two horizontal parallel rails. At the top rail, the angle between the ramp and the rail on the right of the ramp is (3x + 10)°. At the bottom rail, the angle between the ramp and the rail on the left of the ramp is (5x − 30)°. Work out the value of x.
- 3.In triangle XYZ, the side opposite vertex X is labelled using the standard lowercase-letter convention. Which label is correct?
- 4.A straight line passes through points A, B and C, with B between A and C. A fourth point D is not on the line. Angle ABD = 132°. Work out the size of angle DBC.
- 5.A ladder of length 7 m leans against a vertical wall. The foot of the ladder is 3 m from the base of the wall. Work out how high up the wall the ladder reaches. Give your answer correct to 1 decimal place.
- 6.Work out the y-coordinate of the midpoint of the line segment joining (2, 4) and (8, 10).
- 7.A car's windscreen wiper blade is 40 cm long and sweeps through an angle of 110° as it wipes the glass. Using π = 3.14, work out the area of glass it wipes, to the nearest cm².
- 8.A goat is tied by a rope 7 m long to a post at a corner of a rectangular field, where two fences meet at a right angle. The goat can reach anywhere inside the field that the rope allows. Using π = 3.14, work out the area the goat can graze, to the nearest square metre.
- 9.Priya says: 'To find the arc length of a sector, you divide the circumference by the angle in degrees.' Which statement about Priya's method is correct?
- 10.Write down the exact value of cos 60°.
- 11.For two triangles to be proved congruent using SAS, which two facts must be true about both triangles?
- 12.Triangle JKL and triangle MNP are similar, with JK ÷ MN = JL ÷ MP = 2. A student says triangle JKL must be congruent to triangle MNP. Write down why the student is wrong.
- 13.The point A(2, 5) is translated to the point B(7, 3). Write down the column vector that describes this translation.
- 14.A written description of a diagram states: 'AB is marked with a single arrow, CD is marked with a single arrow, and EF is marked with a double arrow.' Using the standard convention for marking parallel lines, what can be concluded?
- 15.A pin on a map is at grid reference (5, 2). It is moved by the vector . Write down its new grid reference.
Answer key
- (b) 62 — Method: co-interior (allied) angles between parallel lines add up to 180°. Working: 180 − 118 = 62. Answer: 62°. A candidate who treats co-interior angles as equal, like corresponding angles, gives 118. A candidate who uses 360° instead of 180°, working out 360 − 118, gets 242. A candidate who subtracts as if the angles were complementary, working out 118 − 90, gets 28.
- (d) 20 — Alternate angles between parallel lines are equal, so 3x + 10 = 5x − 30. Rearranging, 10 + 30 = 5x − 3x, so 40 = 2x, and x = 20. −10 comes from a sign error when rearranging, moving a term to the wrong side and getting −20 = 2x instead. 25 comes from wrongly treating the two angles as co-interior and adding them to 180°: (3x + 10) + (5x − 30) = 180 gives 8x − 20 = 180, so x = 25. 47.5 makes the same co-interior mistake but sets the sum equal to 360° instead of 180°, giving 8x − 20 = 360 and x = 47.5.
- (c) x — By convention, the side opposite a vertex is labelled with the lowercase version of that vertex's letter, so the side opposite X is labelled x. y is the label for the side opposite Y, not X. z is the label for the side opposite Z, not X. X is the vertex's own uppercase letter — the convention specifically switches to lowercase for the side, so the uppercase letter on its own is not correct.
- (b) 48° — Angles on a straight line add up to 180°, so angle ABD + angle DBC = 180°. 180° − 132° = 48°, so angle DBC = 48°. A student who uses angles around a point (360°) instead of a straight line (180°) finds 360° − 132° = 228°. A student who halves angle ABD by mistake, thinking DBC must be half of ABD, gets 132° ÷ 2 = 66°.
- (c) 6.3 m — By Pythagoras' theorem, the height = √(7² − 3²) = √(49 − 9) = √40 = 6.32...≈ 6.3 m. "6.4 m" rounds 6.32...m up to 6.4 instead of correctly rounding it down to 6.3. "4.0 m" comes from subtracting the two given lengths directly, 7 − 3 = 4, instead of subtracting their squares. "10.0 m" comes from adding the two given lengths, 7 + 3 = 10, instead of using Pythagoras' theorem at all.
- (b) 7 — Method: each coordinate of a midpoint is the mean of the matching pair of coordinates, so the y-coordinate of the midpoint depends on the two y-coordinates alone. Working: the y-coordinates are 4 and 10, so the mean is (4 + 10) ÷ 2 = 14 ÷ 2 = 7. Answer: 7. The distractors: 5 comes from working out the x-coordinate of the midpoint, (2 + 8) ÷ 2 = 5, and writing that down in place of the y-coordinate the question asked for; 3 comes from halving the difference of the y-coordinates, (10 − 4) ÷ 2 = 3, which is half the vertical gap rather than a position; 14 comes from adding the two y-coordinates and forgetting to halve the total.
- (d) 1535 cm² — The wiper sweeps out a sector of radius 40 cm, the blade length, through an angle of 110°. Sector area is angle ÷ 360 × π × radius²: 110 ÷ 360 × 3.14 × 1600 = 1535.1 cm², which rounds to 1535 cm². Forgetting to square the radius, using radius instead of radius², gives 38 cm². Using 110 ÷ 180 instead of 110 ÷ 360 for the fraction gives 3070 cm². Treating the 40 cm blade length as a diameter, so using a radius of 20 cm, gives 384 cm².
- (d) 38 m² — The two fences meet at a right angle, so the rope sweeps a quarter of a circle: 90 ÷ 360 = 1/4. Grazing area = (90 ÷ 360) × 3.14 × 7² = 0.25 × 153.86 = 38.465 m², which rounds to 38 m². (5 m² comes from forgetting to square the rope length; 154 m² comes from finding the area of a full circle and forgetting the angle fraction; 11 m² comes from using the arc length formula instead of the sector area formula.)
- (a) Wrong: multiply by angle ÷ 360, not divide by it. — The arc length is the fraction angle ÷ 360 of the circumference, and that fraction is MULTIPLIED by the circumference — it is never divided by the angle itself. So Priya's method, dividing by the angle, is wrong, and the correct statement names both the fraction and the multiplication. Saying she is correct accepts her wrong division. Saying the arc length is the full circumference multiplied by the angle in degrees, with no division at all, drops the 360 that turns the angle into a fraction. Saying the arc length is the radius multiplied by the angle in degrees swaps the circumference for the radius, which is a different and, in degrees, incorrect formula.
- (c) 1/2 — Method: cos 60° comes from half of an equilateral triangle. Cut an equilateral triangle of side 2 down its middle: each half is right-angled, with hypotenuse 2, base 1 and height √3. Working: cosine is the adjacent side over the hypotenuse, the side alongside the 60° angle is the base of length 1, and the hypotenuse is 2, so cos 60° = 1 ÷ 2. Answer: cos 60° = 1/2. A candidate who assumes the cosine falls steadily from cos 0° = 1 to cos 90° = 0 puts 60° two thirds of the way along and writes 1/3; the cosine does not change at a constant rate. Reading the start of the cosine row gives cos 0° = 1, and reading its end gives cos 90° = 0.
- (a) Two sides equal, with the angle between them equal — Method: recall what each letter in SAS stands for, and the order they must appear in. Working: SAS stands for Side, Angle, Side — two pairs of equal sides, with the equal angle positioned between them. Options: 'two sides and any one angle' describes SSA, which is not valid, since the angle must specifically be the included one; 'two angles with the side between them' describes ASA, a different condition; 'all three pairs of sides' describes SSS, also different. Answer: two sides equal, with the angle between them equal.
- (c) The scale factor is 2, not 1, so the sides are not equal — Congruent shapes must be exactly the same size as well as the same shape, which means a scale factor of 1. Here the scale factor between the triangles is 2, so the sides are different lengths and the triangles cannot be congruent, even though they are similar. 'Similar triangles are never congruent' is too strong — a scale factor of exactly 1 would make them both similar and congruent. 'The angles are not necessarily equal' is wrong, since similar triangles always have equal matching angles. 'Congruent triangles must have a right angle' is an unrelated, false fact about congruence.
- (c) $\binom{5}{-2}$ — Method: the top number of a column vector is the change in the x-coordinate and the bottom number is the change in the y-coordinate, each worked out as image minus object. Working: across, 7 − 2 = 5; up, 3 − 5 = −2. So the point moves 5 to the right and 2 down. Answer: $\binom{5}{-2}$. Subtracting the other way round, object minus image, gives $\binom{-5}{2}$, which is the journey from B back to A. Recording the vertical change as 2 because the gap between 3 and 5 is 2, without noting the direction, gives $\binom{5}{2}$, a movement 2 upwards. Adding the coordinates instead of subtracting them gives $\binom{9}{8}$.
- (c) AB ∥ CD only; EF not confirmed — By convention, lines marked with the same number of arrows are parallel to each other, but lines marked with a different number of arrows belong to a different, unrelated family of parallel lines. AB and CD both have a single arrow, so AB is parallel to CD. EF has a double arrow, showing it is not part of the same family as AB and CD; it may be parallel to some other line marked with a double arrow, but nothing here confirms it is parallel to AB or CD, so 'AB ∥ CD only; EF not confirmed' is correct. 'AB, CD and EF are all parallel' and 'EF is parallel to AB' both wrongly treat every arrow mark as showing the same relationship. 'None of the lines are parallel' wrongly assumes a different arrow count rules out any parallel relationship at all, when it actually just signals a different pairing.
- (a) (2, 6) — Adding the vector to the point gives the new position: (5 + (−3), 2 + 4) = (2, 6). '(8, 6)' comes from adding 3 instead of subtracting it, treating the top number as positive. '(9, −1)' comes from swapping the two components of the vector before adding them. '(2, 2)' applies the horizontal movement correctly but forgets to add the vertical movement.
Build your own mix at the worksheet builder.