Printable · GCSE Foundation · ages 14-16
Factors, multiples, primes, HCF and LCM worksheet — GCSE Foundation
Fifteen questions on "factors, multiples, primes, hcf and lcm" — DfE statement N4. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Answer key: Factors, multiples, primes, HCF and LCM worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (a) Yes, because 120 ends in 0 — Method: a whole number divides exactly by 5 when its last digit is 5 or 0, so look at the final digit. Working: the final digit of 120 is 0, so 120 is a multiple of 5; the division confirms it, since 5 × 24 = 120 with nothing left over. Answer: Yes, because 120 ends in 0. The distractors: the option that says yes because 120 is even reaches the right conclusion from the wrong test, since being even is the test for divisibility by 2, and 14 is even but is not a multiple of 5; saying no because 5 does not divide into 12 comes from ignoring the final digit and testing only the leading digits; saying no because the digits add to 3 applies the digit-sum test, which works for 3 and for 9 but not for 5.
- (d) 51 is not prime, because 51 = 3 × 17. — Check 51 for small prime factors: 51 ÷ 3 = 17, and both 3 and 17 are themselves prime, so 51 = 3 × 17 and 51 is not a prime number — it has factors other than 1 and itself. Checking only 2, 3 and 5 and concluding wrongly that none of them divide 51 misses that 3 does divide it exactly, so the claim that 51 is prime because it avoids 2, 3 and 5 is false. Assuming any odd number must be prime ignores that 51 = 3 × 17 is a counterexample — plenty of odd numbers are not prime. Misreading 51 as the even number 52 leads to the false claim that it is divisible by 2; 51 itself is odd, and 2 is not one of its factors. So 51 is not prime, because 51 = 3 × 17.
- (d) 9 — List all the factors of 36 in pairs that multiply to give 36: 1 × 36, 2 × 18, 3 × 12, 4 × 9, and 6 × 6. This gives the factors 1, 2, 3, 4, 6, 9, 12, 18 and 36 — nine factors in total, with 6 counted only once even though it appears in a pair with itself. Forgetting that 36 is itself a factor of 36 and leaving it off the list gives 8. Counting the number of factor pairs, five of them, rather than the number of individual factors gives 5. Treating the repeated pair 6 × 6 as two separate factors, 6 and 6 again, gives 10 instead of 9. So 36 has 9 factors.
- (d) 12 — Method: if the bracelets are identical and no beads are left over, the number of bracelets must divide exactly into both totals, so it is the highest common factor of 24 and 36. Working: 24 = 2³ × 3 and 36 = 2² × 3²; taking the lower index of each shared prime gives 2² × 3 = 4 × 3 = 12. Each bracelet then has 2 red beads and 3 blue beads. Answer: 12. The distractors: 6 comes from taking each shared prime once rather than at its lower index, giving 2 × 3, which is a common factor but not the highest; 72 is the lowest common multiple of 24 and 36, from taking the higher index of each prime instead of the lower; 60 comes from adding the two bead totals instead of looking for a common factor.
- (c) 9 — Method: factors come in pairs that multiply to give the number, so work through the pairs in order; a factor paired with itself is counted only once. Working: the pairs are 1 × 100, 2 × 50, 4 × 25, 5 × 20 and 10 × 10. The first four pairs give eight different factors, and the last pair adds only one more, so the factors are 1, 2, 4, 5, 10, 20, 25, 50 and 100. Answer: 9. The distractors: 10 comes from counting the pair 10 × 10 as two separate factors; 8 comes from leaving 1 out of the list, on the view that 1 is not a proper factor; 4 comes from writing 100 = 2² × 5² and multiplying the two indices together instead of adding 1 to each index first.
- (a) 12 — List the multiples of each number: multiples of 4 are 4, 8, 12, 16, 20, 24; multiples of 6 are 6, 12, 18, 24. The lowest number that appears in both lists is 12. Picking 24, a common multiple but not the lowest one, gives an answer that is too big. Picking 6, the larger of the two original numbers rather than a common multiple, ignores that the lowest common multiple must appear in both lists. Working out the highest common factor instead of the lowest common multiple gives 2. So the lowest common multiple of 4 and 6 is 12.
- (b) 24 — List multiples of 8 and of 12: multiples of 8 are 8, 16, 24, 32; multiples of 12 are 12, 24, 36. The lowest number in both lists is 24, so the lighthouses next flash together after 24 minutes. Multiplying the two numbers together, 8 × 12, gives 96, which double-counts the common factor of 4 shared by 8 and 12. Working out the highest common factor instead of the lowest common multiple gives 4, far too soon a time for both lighthouses to line up again. Adding the two numbers, 8 + 12, gives 20, which is not even a multiple of either 8 or 12. So the lighthouses next flash together after 24 minutes.
- (b) 5 — Method: list the factors of each number and pick the largest value that appears in both lists. Working: the factors of 15 are 1, 3, 5 and 15; the factors of 25 are 1, 5 and 25. The values in both lists are 1 and 5, and the larger of those is 5. Answer: 5. The distractors: 3 comes from choosing a factor of 15 without checking that it also divides 25; 15 comes from assuming that the smaller of the two numbers is always a factor of the larger one; 75 is the lowest common multiple of 15 and 25, given by taking the highest power of each prime instead of the lowest.
- (a) 12 — Compare the powers of each prime that appears in both factorisations. In 2² × 3² and 2² × 3 × 7, the prime 2 appears with power 2 in both, and the prime 3 appears with power 2 in one and only power 1 in the other — take the lower power, 3¹. Multiplying the shared primes at their lower powers, 2² × 3, gives 12. Using power 1 for both primes instead of comparing the powers properly, 2 × 3, gives 6, which misses that 2 is common at power 2, not power 1. Multiplying the primes at their higher powers and including 7, which only appears in 84, gives 2² × 3² × 7, which comes to 252 — this is the lowest common multiple, not the highest common factor. Only spotting that 3 is a common prime and overlooking that 2 is common as well gives 3. So the highest common factor of 36 and 84 is 12.
- (b) 4 — Method: list the factors of each number and compare them; the highest common factor is the largest number that appears in both lists. Working: the factors of 20 are 1, 2, 4, 5, 10, 20; the factors of 32 are 1, 2, 4, 8, 16, 32. The numbers that appear in both lists are 1, 2 and 4, and the largest of these is 4. 2 is a common factor of 20 and 32 but not the largest one. 8 is a factor of 32 but not of 20, since 20 ÷ 8 is not a whole number. 160 is the lowest common multiple of 20 and 32, not their highest common factor. Answer: 4.
- (a) 120 — For the lowest common multiple, take each prime that appears in either factorisation, raised to the higher power. In 2³ × 3 and 2² × 3 × 5, the prime 2 appears with power 3 in one and power 2 in the other — take the higher, 2³; the prime 3 appears with the same power in both, 3¹; and the prime 5 appears only in the second factorisation, so use 5¹. Multiplying these, 2³ × 3 × 5, gives 120. Taking the lower power of 2 instead of the higher, and leaving out 5 altogether, gives the highest common factor, 12, instead. Multiplying the two original numbers together, 24 × 60, gives 1440, which double-counts every shared prime factor. Assuming the lowest common multiple is simply the larger of the two numbers gives 60, but 60 is not a multiple of 24 — 60 ÷ 24 does not divide exactly. So the lowest common multiple of 24 and 60 is 120.
- (a) 91 is not prime, because 91 = 7 × 13. — Check 91 for prime factors up to its square root, which is just under 10: 91 ÷ 7 = 13, and both 7 and 13 are prime, so 91 = 7 × 13 and 91 is not a prime number. Checking only 2, 3 and 5 misses that 7 also needs to be tried — 91 is odd, its digits do not sum to a multiple of 3 (9 + 1 = 10), and it does not end in 0 or 5, so those three checks alone wrongly suggest it is prime. Assuming any odd number ending in 1 must be prime ignores that 91 = 7 × 13 is a counterexample. Misapplying the digit-sum test for 3 by miscounting 9 + 1 as a multiple of 3 wrongly concludes 91 is divisible by 3, when the correct digit sum, 10, is not a multiple of 3. So 91 is not prime, because 91 = 7 × 13.
- (a) 24 — Method: rearrange the relationship so that the lowest common multiple stands alone; it is the product of the two numbers divided by their highest common factor. Working: 48 = 2 × the lowest common multiple, so the lowest common multiple is 48 ÷ 2 = 24. Checking, 24 is in the 6 times table and in the 8 times table. Answer: 24. The distractors: 48 comes from giving the product of the two numbers and never dividing by the highest common factor; 96 comes from multiplying by the highest common factor instead of dividing by it; 12 comes from dividing by the highest common factor twice, once for each of the two numbers.
- (a) 12 — Method: for any two numbers, their highest common factor multiplied by their lowest common multiple equals the product of the two numbers. This holds because the HCF collects every prime factor the two numbers share, and the LCM collects every prime factor that appears in either number, so between them they use each prime factor of the two numbers exactly once — the same primes as the product. Working: 4 × 60 = 240, and 240 ÷ 20 = 12. 15 comes from working out 60 ÷ 4 = 15, dividing the wrong pair of numbers. 16 comes from working out 20 − 4 = 16, subtracting the highest common factor instead of using the product rule. 240 is 4 × 60, the product of the highest common factor and the lowest common multiple, left un-divided by 20. Answer: 12.
- (a) 6 — Method: list the factors of each number and compare them. Working: the factors of 18 are 1, 2, 3, 6, 9, 18; the factors of 24 are 1, 2, 3, 4, 6, 8, 12, 24. The only option that appears in both lists is 6. 8 is a factor of 24 but not of 18. 9 is a factor of 18 but not of 24. 12 is a factor of 24 but not of 18. Answer: 6.
Build your own mix at the worksheet builder.