Printable · GCSE Foundation · ages 14-16
The four operations and place value worksheet — GCSE Foundation
Fifteen questions on "the four operations and place value" — DfE statement N2. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Non-calculator
Answer key: The four operations and place value worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (c) 2/3 — Method: fractions with the same denominator are added by adding the numerators and leaving the denominator alone, because the parts are already the same size. Working: 1/3 + 1/3 has numerators 1 + 1 = 2 and the denominator stays as 3, giving 2/3. Answer: 2/3. The distractors: 2/6 comes from adding the denominators as well as the numerators, 1 + 1 over 3 + 3; 2/9 comes from adding the numerators but multiplying the denominators, 1 + 1 over 3 × 3; 1/9 comes from multiplying throughout instead of adding, 1 × 1 over 3 × 3.
- (b) 5 — Method: divide the total amount of sugar by the amount needed for one cake, then round down because a part-used amount of sugar cannot make an extra whole cake. Working: 3 1/2 ÷ 2/3 = 7/2 × 3/2 = 21/4 = 5.25; only 5 complete cakes can be made, since the leftover 0.25 of a portion is not enough for a 6th cake. Answer: 5. 5.25 gives the exact result of the division without rounding down to a whole number of cakes. 7 comes from multiplying 3.5 by 2 and ignoring the need to also divide by 3 as part of dividing by the fraction 2/3. 6 comes from rounding 5.25 up to the nearest whole number instead of down, wrongly assuming a 6th cake could be made from the leftover sugar.
- (d) 0.25 — Dividing by 1000 moves every digit three place-value columns, so 250 ÷ 1000 = 0.25. A candidate who divides by 100 instead of 1000 gets 2.5. A candidate who divides by 10,000 instead of 1000 gets 0.025. A candidate who divides by 10 instead of 1000 gets 25.
- (a) 14 — Multiply both numbers by 10 to clear the decimals: 8.4 becomes 84 and 0.6 becomes 6. Then divide: 84 ÷ 6 = 14, so 14 complete pieces can be cut. Scaling only the divisor by 10 and leaving the dividend as 8.4 gives 8.4 ÷ 6 = 1.4, which rounds down to 1 complete piece — the dividend was never converted. Scaling only the dividend by 10 and leaving the divisor as 0.6 gives 84 ÷ 0.6 = 140. Rounding the divisor from 0.6 to 0.7 before dividing, trading accuracy for a rounder number, gives 8.4 ÷ 0.7 = 12. So 14 complete pieces of ribbon can be cut.
- (c) 87 litres — Work out how much water is drained: 8 × 6 = 48 litres. Subtract this from the starting amount: 120 − 48 = 72 litres. Then add the 15 litres from the hose: 72 + 15 = 87 litres. Subtracting the 15 litres instead of adding it, as though the hose also removed water, gives 120 − 48 − 15 = 57 litres. Stopping after the drain step, without adding the hose water back in, leaves the working at 72 litres. Adding the rate and the time instead of multiplying them, 8 + 6 = 14 litres drained, and then working from there gives 120 − 14 + 15 = 121 litres. So 87 litres of water is left in the tank.
- (b) 364 — Divide in stages using multiples of 12. 12 × 300 = 3600, leaving a remainder of 4368 − 3600 = 768. Then 12 × 64 = 768, so 4368 ÷ 12 = 300 + 64 = 364. Placing the decimal point as though dividing 436.8 by 12 gives 36.4. Transposing the last two digits of 364 gives 346. Working out 768 ÷ 12 as 4 instead of 64, losing the tens digit, and adding 300 + 4 gives 304. So 4368 ÷ 12 = 364.
- (c) 25/36 — Method: square a fraction by squaring its numerator and its denominator separately, then add the two results over a common denominator. Working: (2/3)² = 4/9 and (1/2)² = 1/4; the lowest common denominator of 9 and 4 is 36, so 4/9 = 16/36 and 1/4 = 9/36, and 16 + 9 = 25. Answer: 25/36. The distractors: 49/36 comes from adding the two fractions first and squaring the total, giving (7/6)²; 5/13 comes from squaring correctly but then adding the numerators and the denominators, as (4 + 1)/(9 + 4); 7/3 comes from doubling each fraction instead of squaring it, giving 4/3 + 1.
- (b) 18 — Method: multiply the two numbers ignoring their signs, then apply the rule that a negative number multiplied by a negative number gives a positive answer. Working: 6 × 3 = 18; since both −6 and −3 are negative, the product is positive. Answer: 18. −18 comes from keeping the answer negative, as if only one of the two negative signs affects the sign of the product. −9 comes from adding the two numbers instead of multiplying them, −6 + (−3) = −9. 9 comes from adding 6 and 3 as if both numbers were positive, ignoring the negative signs entirely.
- (b) −5 — Using the order of operations, work out the multiplication first: 4 × (−2) = −8. Then 3 + (−8) = −5. A candidate who adds before multiplying gets (3 + 4) × (−2) = −14. A candidate who drops the negative sign on the multiplication gets 3 + 4 × 2 = 11. A candidate who works out the multiplication correctly but gives that as the final answer, forgetting to combine it with the 3, gets −8.
- (b) 4.05 — Method: line up the decimal points (or place value columns) before adding. Working: 3.60 + 0.45 = 4.05. Answer: 4.05. 3.65 is Priya's answer, from adding the digits without lining up the place value columns, which effectively treats 0.45 as 0.05. 4.5 comes from rounding both numbers up first, 3.6 to 4 and 0.45 to 0.5, and adding those instead of adding the exact values. 0.81 comes from adding the digits 36 and 45 together to get 81, then placing the decimal point in the wrong position.
- (a) 7 — Dividing by 0.1 is the same as multiplying by 10, so 0.7 ÷ 0.1 = 7. Meera's answer of 0.07 comes from dividing 0.7 by 10 instead of by 0.1, the wrong way round. A candidate who confuses 0.1 with 0.01 multiplies by 100 instead of 10 and gets 70. A candidate who thinks dividing by a number less than 1 does not change the value gets 0.7.
- (c) 0.024 — Multiply the digits ignoring the decimal points: 6 × 4 = 24. Count the total number of decimal places in the two numbers being multiplied: 0.6 has 1 decimal place and 0.04 has 2, giving 3 in total. Place the decimal point in 24 so that there are 3 digits after it: 0.024. Counting only 2 decimal places instead of 3 gives 0.24. Counting 4 decimal places instead of 3 gives 0.0024. Counting only 1 decimal place instead of 3 — in effect moving the point in just one of the two numbers, as if the calculation were 6 × 0.4 — gives 2.4. So 0.6 × 0.04 = 0.024.
- (d) −1.7 — Since the numbers have different signs, find the difference between their sizes: 4.5 − 2.8 = 1.7, then keep the sign of the number further from zero. So −4.5 + 2.8 = −1.7. A candidate who drops the negative sign gets 1.7. A candidate who adds the magnitudes instead of finding the difference gets −(4.5 + 2.8) = −7.3. A candidate who takes the smaller digit from the larger in the tenths column, doing 8 − 5 = 3 instead of borrowing to make 15 − 8 = 7, gets 2.3 and so −2.3.
- (b) 2.1 m — The three pieces use 3 × 0.9 = 2.7 m of wood. Remaining wood = 4.8 − 2.7 = 2.1 m. A candidate who miscounts and only subtracts 2 pieces instead of 3 gets 4.8 − 1.8 = 3.0 m. A candidate who adds instead of subtracting gets 4.8 + 2.7 = 7.5 m. A candidate who gives the length used instead of the length remaining gets 2.7 m.
- (c) 0.07 — Each digit after the decimal point has a place value: the first digit is tenths, the second is hundredths, the third is thousandths. In 3.472, the 4 is in the tenths place and the 7 is in the hundredths place, so it is worth 0.07. Reading it as 7 ignores place value altogether, treating it as if it were a whole number. Reading it as 0.7 puts it one place too big, in the tenths place. Reading it as 0.007 puts it one place too small, in the thousandths place. The digit 7 in 3.472 is worth 0.07.
Build your own mix at the worksheet builder.