Printable · GCSE Foundation · ages 14-16
Ordering numbers and inequality symbols worksheet — GCSE Foundation
Fifteen questions on "ordering numbers and inequality symbols" — DfE statement N1. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Answer key: Ordering numbers and inequality symbols worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (a) 1/2, 3/5, 2/3, 5/6 — Convert all four fractions to a common denominator of 30: 2/3 is 20/30, 3/5 is 18/30, 5/6 is 25/30, and 1/2 is 15/30. Ordering by these numerators, smallest to largest, gives 15/30, 18/30, 20/30, 25/30, which is 1/2, 3/5, 2/3, 5/6. Ordering by the size of the numerator in the original fractions, 1, 2, 3, 5, rather than converting to a common denominator, gives the wrong order 1/2, 2/3, 3/5, 5/6, because it ignores that the denominators are different. Ordering largest to smallest instead of smallest to largest, as the question asks, gives 5/6, 2/3, 3/5, 1/2. Using the rule "the bigger the denominator, the smaller the fraction" to place the last two, so that 5/6 is put below 2/3 because 6 is bigger than 3, gives 1/2, 3/5, 5/6, 2/3 — that rule only holds when the numerators are the same, and here 20/30 really is smaller than 25/30. So the correct order, smallest to largest, is 1/2, 3/5, 2/3, 5/6.
- (d) −2 — Method: place the two end values on a number line and list the integers that sit strictly between them. Working: reading from left to right the integers run −4, −3, −2, −1, so the values strictly between the ends are −3 and −2. Only one of those is offered. Answer: −2. The distractors: −5 comes from ordering negatives by the size of their digits, which wrongly places −5 to the right of −4; 0 comes from carrying on past −1 instead of stopping at it; 2 comes from ignoring the minus signs and choosing a number between 1 and 4.
- (d) −6 — Method: check each option to see if it falls strictly between −8 and −5, remembering that numbers become smaller as they get more negative. Working: −8 < −6 < −5, so −6 lies between them. Answer: −6. −9 comes from a value that is more negative than −8, so it lies outside the range, below −8. −4 comes from a value that is less negative than −5, so it lies outside the range, above −5. 6 comes from ignoring the negative signs and picking a positive number between 5 and 8.
- (a) 13 °C — Method: subtract the lowest temperature from the highest temperature to find the difference. Working: the highest temperature is 6 °C and the lowest is −7 °C. Difference = 6 − (−7) = 6 + 7 = 13. Answer: 13 °C. 8 °C comes from using −2 °C as the lowest temperature instead of −7 °C: 6 − (−2) = 8. 5 °C comes from finding the difference between the two negative temperatures instead of the highest and lowest: −2 − (−7) = 5. −1 °C comes from adding the highest and lowest temperatures instead of subtracting: 6 + (−7) = −1.
- (a) 0.5, 0.55, 0.56, 0.6, 0.601 — Compare the decimals by giving them all the same number of decimal places first: 0.600, 0.550, 0.601, 0.500, 0.560. Ordering these from smallest to largest gives 0.500, 0.550, 0.560, 0.600, 0.601, which is 0.5, 0.55, 0.56, 0.6, 0.601. Comparing the digits as though they were whole numbers, reading 0.601 as "601" and 0.5 as "5", without padding to the same number of decimal places, gives the wrong order 0.5, 0.6, 0.55, 0.56, 0.601, because it ignores the place value of each digit. Ordering largest to smallest instead of smallest to largest, as the question asks, gives 0.601, 0.6, 0.56, 0.55, 0.5. Misreading the close values 0.55 and 0.56 and swapping them gives 0.5, 0.56, 0.55, 0.6, 0.601. So the correct order, smallest to largest, is 0.5, 0.55, 0.56, 0.6, 0.601.
- (c) −2 — On a number line, negative numbers get smaller as their size (ignoring the sign) gets bigger, so −2 is closest to zero and is the largest of the four. A candidate who ignores the negative signs and orders the numbers as if they were positive, largest digit first, would pick −9 as the 'largest'. Continuing that same reversed ranking, the next number in digit order is −7. The number one step further along that same reversed ranking is −4, still short of the true largest value, −2.
- (a) −3 °C — Method: write each reading as a signed temperature, then choose the one further to the right on a number line. Working: 8 °C below zero is −8 °C and 3 °C below zero is −3 °C. On a number line −3 lies to the right of −8, so it is the warmer reading. Answer: −3 °C. The distractors: −8 °C comes from ordering negatives by the size of their digits, treating −8 as the larger number; 3 °C has the right size but the sign dropped, and a reading of 3 °C is above zero rather than below it; 5 °C comes from working out the difference between the two readings instead of choosing one of them.
- (d) 0.3 — Converting the fractions to decimals, 1/4 = 0.25 and 2/5 = 0.4, so any decimal between 0.25 and 0.4 is a valid answer, and 0.3 fits. Confusing 1/4 with 1/5 and converting it as 0.2 instead of 0.25 gives a value below the true lower bound. Confusing 2/5 with 1/2 and converting it as 0.5 instead of 0.4 gives a value above the true upper bound. Converting the fractions correctly but choosing a decimal above the true upper bound of 0.4 instead of between the two values gives 0.45.
- (a) 7/8, 17/20, 0.8, 78% — Method: convert every value to a decimal, then order the decimals from largest to smallest. Working: 7/8 = 0.875, 17/20 = 0.85, 0.8 = 0.8, 78% = 0.78. Ordering from largest to smallest gives 7/8, 17/20, 0.8, 78%. Answer: 7/8, 17/20, 0.8, 78%. '78%, 0.8, 17/20, 7/8' comes from ordering the converted decimals from smallest to largest instead of largest to smallest. '17/20, 7/8, 0.8, 78%' comes from converting 17/20 incorrectly as larger than 7/8, for example treating 17/20 as 0.87 instead of 0.85, swapping the top two. '7/8, 0.8, 17/20, 78%' comes from converting 17/20 incorrectly as equal to 0.8, swapping the middle two.
- (c) 3 or −5 — Method: a point a fixed distance from another can lie on either side of it, so move the given distance in each direction from the starting point. Working: moving 4 units to the right gives −1 + 4 = 3, and moving 4 units to the left gives −1 − 4 = −5. Answer: 3 or −5. The distractors: 5 or −3 comes from starting at 1 instead of −1, giving 1 + 4 and 1 − 4; 3 only comes from moving to the right and forgetting that the point could lie to the left as well; 4 or −4 comes from measuring the distance from zero instead of from point A, which just repeats the given distance.
- (b) 0.3, 32%, 7/20 — Method: convert every number to a decimal so they can be compared on the same scale. Working: 7/20 = 0.35, 0.3 stays as 0.3, and 32% = 0.32. Comparing 0.3, 0.32 and 0.35 in size gives the order 0.3, then 0.32, then 0.35. Answer: 0.3, 32%, 7/20. 7/20, 32%, 0.3 lists the numbers from largest to smallest instead of smallest to largest. 0.3, 7/20, 32% swaps 32% and 7/20, treating the fraction 7/20 as smaller even though 7/20 = 0.35 is bigger than 32% = 0.32. 32%, 0.3, 7/20 comes from moving the digits one place too far when converting the percentage, giving 0.032 instead of 0.32, which makes 32% look far smaller than it really is.
- (c) > — Method: fractions with the same denominator are made of parts of the same size, so compare how many of those parts each fraction has. Working: both fractions are elevenths, and 6 elevenths is 2 more elevenths than 4 elevenths, so the fraction on the left is the larger one. The symbol must have its point facing the smaller side. Answer: >. The distractors: < comes from comparing the numerators the wrong way round, as though a larger numerator gave a smaller fraction; = comes from seeing the same denominator in both fractions and concluding that the fractions themselves are the same size; ≤ comes from working out the direction correctly but then picking the wrong symbol for it, reading it as though it meant 'is greater than or equal to'; ≤ means 'is less than or equal to', and 6 elevenths is neither less than nor equal to 4 elevenths.
- (d) the first mark after 0 — Method: when a unit length is split into equal parts, each gap is one part of the whole, so 1/4 is one gap along from 0. Working: four equal parts means each gap measures 1/4, so the marks after 0 stand for 1/4, 2/4, 3/4 and 4/4. One gap along from 0 is therefore the mark for 1/4. Answer: the first mark after 0. The distractors: the second mark after 0 comes from counting 0 itself as the first mark; the third mark after 0 comes from counting back from the 1 end instead of forward from 0; the fourth mark after 0 comes from reading the 4 in the denominator as the number of the mark rather than the number of parts.
- (a) 2, 3, 4, 5 — Method: work out which whole numbers satisfy both parts of the inequality. Working: n ≥ 2 means n can be 2 or more; n < 6 means n must be less than 6, so 6 itself is not included. The whole numbers that fit both conditions are 2, 3, 4 and 5. Answer: 2, 3, 4, 5. 2, 3, 4, 5, 6 treats < 6 as ≤ 6 and wrongly includes 6. 3, 4, 5 treats ≥ 2 as > 2 and wrongly leaves out 2. 1, 2, 3, 4, 5 wrongly includes 1, which does not satisfy n ≥ 2.
- (b) 0 > −1 — Method: test each statement by placing both of its numbers on a number line; the greater number is the one further to the right. Working: every negative number lies to the left of zero, so zero is greater than −1. Among the negatives, −3 lies to the right of −5, so −5 is not greater than −3. Answer: 0 > −1. The distractors: −5 > −3 comes from ordering the negatives by the size of their digits, so that 5 makes −5 look the larger; −3 > 0 comes from ignoring the minus sign and comparing 3 with 0; 0 < −1 comes from the belief that zero is the smallest number there is, so that even a negative number is above it.
Build your own mix at the worksheet builder.