Printable · GCSE Foundation · ages 14-16
Ordering numbers and inequality symbols worksheet — GCSE Foundation
Fifteen questions on "ordering numbers and inequality symbols" — DfE statement N1. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Answer key: Ordering numbers and inequality symbols worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (a) 13 °C — Method: subtract the lowest temperature from the highest temperature to find the difference. Working: the highest temperature is 6 °C and the lowest is −7 °C. Difference = 6 − (−7) = 6 + 7 = 13. Answer: 13 °C. 8 °C comes from using −2 °C as the lowest temperature instead of −7 °C: 6 − (−2) = 8. 5 °C comes from finding the difference between the two negative temperatures instead of the highest and lowest: −2 − (−7) = 5. −1 °C comes from adding the highest and lowest temperatures instead of subtracting: 6 + (−7) = −1.
- (c) 6/8 — Method: two fractions can only be compared directly when they share a denominator, so rewrite 3/4 in eighths and then compare the numerators. Working: 5/8 is already in eighths, and 3/4 = (3 × 2)/(4 × 2) = 6/8. Comparing the numerators, 6 > 5, so Oliver eats the larger share. Answer: 6/8. The distractors: 5/8 comes from skipping the conversion altogether and assuming that a bar cut into eighths must give the bigger share because it has more pieces; once both shares are written over the same denominator, 5 eighths is one eighth less than 6 eighths. 1/8 comes from working out how much more Oliver eats, 6/8 − 5/8, instead of writing down the greater of the two shares. 7/8 comes from adding 4 to the numerator and 4 to the denominator of 3/4 instead of multiplying both by 2.
- (d) 0.3 — Converting the fractions to decimals, 1/4 = 0.25 and 2/5 = 0.4, so any decimal between 0.25 and 0.4 is a valid answer, and 0.3 fits. Confusing 1/4 with 1/5 and converting it as 0.2 instead of 0.25 gives a value below the true lower bound. Confusing 2/5 with 1/2 and converting it as 0.5 instead of 0.4 gives a value above the true upper bound. Converting the fractions correctly but choosing a decimal above the true upper bound of 0.4 instead of between the two values gives 0.45.
- (a) 0.55, 58%, 3/5 — Converting all three to decimals: 3/5 = 0.6, 0.55 stays as 0.55, and 58% = 0.58. In order from smallest to largest, this is 0.55, then 58%, then 3/5. Writing the numbers in the reverse order, largest to smallest, gives 3/5, 58%, 0.55. Misconverting 3/5 as 0.5 instead of 0.6 makes it appear smaller than both other values, giving the order 3/5, 0.55, 58%. Misconverting 58% as 0.058 instead of 0.58, by moving the decimal point two extra places, makes it appear smallest of the three, giving the order 58%, 0.55, 3/5.
- (a) 10 °C — Method: work out the coldest and warmest of the four temperatures, then subtract to find the difference. Working: the coldest temperature is Sam's, −9 °C, and the warmest is Alex's, 1 °C. The difference is 1 − (−9) = 1 + 9 = 10. Answer: 10 °C. 8 °C comes from working out 1 − 9 = −8 and reporting 8, dropping the negative sign on −9 instead of turning the subtraction into an addition. 3 °C comes from comparing the wrong pair, Sam's −9 °C and Ben's −6 °C, instead of the coldest and the warmest: −6 − (−9) = 3. 7 °C comes from comparing Ben's −6 °C with Alex's 1 °C, mistakenly treating Ben's reading as the coldest instead of Sam's.
- (c) > — Method: fractions with the same denominator are made of parts of the same size, so compare how many of those parts each fraction has. Working: both fractions are elevenths, and 6 elevenths is 2 more elevenths than 4 elevenths, so the fraction on the left is the larger one. The symbol must have its point facing the smaller side. Answer: >. The distractors: < comes from comparing the numerators the wrong way round, as though a larger numerator gave a smaller fraction; = comes from seeing the same denominator in both fractions and concluding that the fractions themselves are the same size; ≤ comes from working out the direction correctly but then picking the wrong symbol for it, reading it as though it meant 'is greater than or equal to'; ≤ means 'is less than or equal to', and 6 elevenths is neither less than nor equal to 4 elevenths.
- (a) = — Method: convert the fraction to a decimal so both numbers are in the same form. Working: 3/10 means 3 divided by 10, which is 0.3. Answer: 3/10 = 0.3, so the symbol is =. < comes from treating the fraction as smaller than the decimal without converting it first. > comes from the same mistake the other way round. ≠ comes from assuming a fraction and a decimal can never be equal.
- (c) < — Compare the two decimals by their value, not by how many digits they have: 0.45 is worth less than half, while 0.5 is exactly half, so 0.45 is smaller. The correct symbol is <, since 0.45 is less than 0.5. Choosing > treats 0.45 as bigger because it has more digits after the decimal point than 0.5 — extra decimal digits do not make a number bigger. Choosing = comes from rounding 0.45 to 1 decimal place, 0.5, and then treating the rounded value as if it were the original number. Choosing ≥ would mean 0.45 is greater than or equal to 0.5, which is false in both parts, since 0.45 is neither equal to nor bigger than 0.5. So 0.45 < 0.5.
- (a) −3 °C — Method: write each reading as a signed temperature, then choose the one further to the right on a number line. Working: 8 °C below zero is −8 °C and 3 °C below zero is −3 °C. On a number line −3 lies to the right of −8, so it is the warmer reading. Answer: −3 °C. The distractors: −8 °C comes from ordering negatives by the size of their digits, treating −8 as the larger number; 3 °C has the right size but the sign dropped, and a reading of 3 °C is above zero rather than below it; 5 °C comes from working out the difference between the two readings instead of choosing one of them.
- (a) 0.5, 0.55, 0.56, 0.6, 0.601 — Compare the decimals by giving them all the same number of decimal places first: 0.600, 0.550, 0.601, 0.500, 0.560. Ordering these from smallest to largest gives 0.500, 0.550, 0.560, 0.600, 0.601, which is 0.5, 0.55, 0.56, 0.6, 0.601. Comparing the digits as though they were whole numbers, reading 0.601 as "601" and 0.5 as "5", without padding to the same number of decimal places, gives the wrong order 0.5, 0.6, 0.55, 0.56, 0.601, because it ignores the place value of each digit. Ordering largest to smallest instead of smallest to largest, as the question asks, gives 0.601, 0.6, 0.56, 0.55, 0.5. Misreading the close values 0.55 and 0.56 and swapping them gives 0.5, 0.56, 0.55, 0.6, 0.601. So the correct order, smallest to largest, is 0.5, 0.55, 0.56, 0.6, 0.601.
- (b) 0.3, 32%, 7/20 — Method: convert every number to a decimal so they can be compared on the same scale. Working: 7/20 = 0.35, 0.3 stays as 0.3, and 32% = 0.32. Comparing 0.3, 0.32 and 0.35 in size gives the order 0.3, then 0.32, then 0.35. Answer: 0.3, 32%, 7/20. 7/20, 32%, 0.3 lists the numbers from largest to smallest instead of smallest to largest. 0.3, 7/20, 32% swaps 32% and 7/20, treating the fraction 7/20 as smaller even though 7/20 = 0.35 is bigger than 32% = 0.32. 32%, 0.3, 7/20 comes from moving the digits one place too far when converting the percentage, giving 0.032 instead of 0.32, which makes 32% look far smaller than it really is.
- (c) > — Method: write both fractions with a common denominator so they can be compared directly. Working: −2/3 = −4/6. Comparing −4/6 and −5/6, −4 is greater than −5, so −4/6 is greater than −5/6. Answer: −2/3 > −5/6, so the symbol is >. < comes from treating the fraction with the larger numerator and denominator, 5/6, as the greater number, ignoring that both fractions are negative. = comes from assuming the fractions must be equal because they look similar in size. ≤ combines < (false) with = (false).
- (d) −6 — Method: check each option to see if it falls strictly between −8 and −5, remembering that numbers become smaller as they get more negative. Working: −8 < −6 < −5, so −6 lies between them. Answer: −6. −9 comes from a value that is more negative than −8, so it lies outside the range, below −8. −4 comes from a value that is less negative than −5, so it lies outside the range, above −5. 6 comes from ignoring the negative signs and picking a positive number between 5 and 8.
- (d) the first mark after 0 — Method: when a unit length is split into equal parts, each gap is one part of the whole, so 1/4 is one gap along from 0. Working: four equal parts means each gap measures 1/4, so the marks after 0 stand for 1/4, 2/4, 3/4 and 4/4. One gap along from 0 is therefore the mark for 1/4. Answer: the first mark after 0. The distractors: the second mark after 0 comes from counting 0 itself as the first mark; the third mark after 0 comes from counting back from the 1 end instead of forward from 0; the fourth mark after 0 comes from reading the 4 in the denominator as the number of the mark rather than the number of parts.
- (c) 3 or −5 — Method: a point a fixed distance from another can lie on either side of it, so move the given distance in each direction from the starting point. Working: moving 4 units to the right gives −1 + 4 = 3, and moving 4 units to the left gives −1 − 4 = −5. Answer: 3 or −5. The distractors: 5 or −3 comes from starting at 1 instead of −1, giving 1 + 4 and 1 − 4; 3 only comes from moving to the right and forgetting that the point could lie to the left as well; 4 or −4 comes from measuring the distance from zero instead of from point A, which just repeats the given distance.
Build your own mix at the worksheet builder.