Printable · GCSE Foundation · ages 14-16
Converting between standard and compound units worksheet — GCSE Foundation
Fifteen questions on "converting between standard and compound units" — DfE statement R1. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Non-calculator
Converting between standard and compound units worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.Write 3 hours 45 minutes as a decimal number of hours.
- 2.A lorry is carrying a load of mass m tonnes. Given that 1 tonne = 1000 kg, write down an expression for the mass of the load in kilograms.
- 3.Rice costs £3.20 per kg. Work out the cost of the rice in pence per 100 g.
- 4.A smoothie recipe combines 350 cm³ of mango juice with 650 cm³ of orange juice. Work out the total volume of the smoothie in litres.
- 5.A cyclist travels d kilometres in t hours. Write down an expression, in terms of d and t, for the cyclist's average speed in km/h.
- 6.A metal has a density of 7.8 g/cm³. Work out the density of the metal in kg/m³.
- 7.A parcel has a mass of 2400 g. Given that 1 kg = 1000 g, work out the mass of the parcel in kilograms.
- 8.1 metre = 100 cm. Work out how many square centimetres there are in 1 square metre.
- 9.Work out how many seconds there are in 3 minutes and 20 seconds.
- 10.A section of a kitchen wall has an area of 45,000 cm². Work out the area of this section in m².
- 11.A water tank is a cuboid measuring 30 cm × 20 cm × 10 cm. The tank is full of water. Work out how many litres of water it holds.
- 12.A film runs for 2.25 hours. Work out the length of the film in minutes.
- 13.1 litre = 100 centilitres. Work out how many centilitres there are in 6 litres.
- 14.A force of 20 N acts on an area of 4 m². Using pressure = force ÷ area, work out the pressure, in pascals.
- 15.The density of a liquid is 0.92 g/cm³. Work out the density of the liquid in kg/m³.
Answer key
- (d) 3.75 — 45 minutes is 45 ÷ 60 = 0.75 of an hour, so 3 hours 45 minutes = 3.75 hours. Getting 3.45 comes from writing the minutes directly after the decimal point instead of converting them to a fraction of an hour. Getting 3.67 comes from misreading 45 minutes as 40 minutes and converting 40 ÷ 60 instead. Getting 4.15 comes from rounding 45 minutes up to the next whole hour and adding the remainder as if it were more minutes past that hour.
- (a) 1000m — Method: kilograms are a smaller unit than tonnes, so change tonnes into kilograms by multiplying by 1000. Working: m tonnes = m × 1000 kg = 1000m kg. So the expression is 1000m. Distractor m/1000 comes from dividing by 1000 instead of multiplying, which would make the number of kilograms smaller than the number of tonnes, the wrong way round. Distractor 1000 + m comes from adding the conversion factor instead of multiplying by it. Distractor m − 1000 comes from subtracting the conversion factor instead of multiplying by it.
- (b) 32p — £3.20 is 320p, and 1 kg is 1000 g, which is 10 lots of 100 g. Divide the price in pence by 10: 320 ÷ 10 = 32p per 100 g. Dividing 320 by 100 instead of 10 gives 3.2p, using the wrong number of hundred-grams in a kilogram. Multiplying 320 by 10 instead of dividing gives 3200p. Forgetting to convert pounds to pence and dividing 3.20 by 10 gives 0.32, which is still in pounds rather than pence. Rice costs 32p per 100 g.
- (b) 1.00 litres — Total volume = 350 + 650 = 1000 cm³. Since 1000 cm³ = 1 litre, the smoothie is 1.00 litre. Using only the orange juice's 650 cm³ and converting that gives 0.65 litres, forgetting the mango juice entirely. Using only the mango juice's 350 cm³ gives 0.35 litres, forgetting the orange juice. Adding both volumes correctly to get 1000 cm³ but not converting to litres leaves the answer as 1000.00, which is the volume in the wrong unit.
- (d) d ÷ t — Average speed = distance ÷ time, so the expression is d ÷ t. Writing t ÷ d inverts the formula, giving the time per kilometre instead of the speed. Writing d × t confuses speed with the formula for distance travelled (distance = speed × time) used the wrong way round. Writing d + t treats the relationship as additive instead of using division.
- (c) 7800 kg/m³ — Method: build the conversion factor from the two unit changes separately — one for the mass, one for the volume. Working: 1 kg = 1000 g, so the mass figure is divided by 1000; 1 m = 100 cm, so 1 m³ = 100 × 100 × 100 = 1000000 cm³ and the volume figure is multiplied by 1000000. The density figure is therefore multiplied by 1000000 ÷ 1000 = 1000, giving 7.8 × 1000 = 7800. So the density of the metal is 7800 kg/m³. Distractor 780 kg/m³ comes from multiplying by 100 instead of 1000. Distractor 78000 kg/m³ comes from multiplying by 10000, an extra zero. Distractor 7.8 kg/m³ comes from not converting the units at all.
- (a) 2.4 kg — Method: to change grams into kilograms, divide by 1000. Working: 2400 ÷ 1000 = 2.4 kg. So the parcel has a mass of 2.4 kg. Distractor 24 kg comes from dividing by 100 instead of 1000. Distractor 0.24 kg comes from dividing by 10000, an extra zero. Distractor 240 kg comes from dividing by 10 instead of 1000.
- (b) 10000 cm² — Method: an area conversion factor is the square of the length conversion factor, because both sides of the square are scaled. Working: a square metre is a square of side 100 cm, so its area is 100 × 100 = 10000 cm². Answer: 10000 cm². The distractors: 100 cm² comes from using the length factor without squaring it; 200 cm² comes from doubling the length factor instead of squaring it; 1000000 cm² comes from cubing the factor, which is the conversion for a volume, not an area.
- (a) 200 seconds — Method: change the minutes into seconds using 1 minute = 60 seconds, then add on the loose seconds. Working: 3 × 60 = 180, and 180 + 20 = 200. Answer: 200 seconds. The distractors: 320 seconds comes from taking a minute as 100 seconds, giving 300 + 20; 180 seconds comes from converting the 3 minutes and forgetting the extra 20 seconds; 23 seconds comes from adding 3 and 20 without converting the minutes at all.
- (d) 4.50 m² — 1 m² = 100 cm × 100 cm = 10,000 cm², so to convert cm² to m² you divide by 10,000: 45,000 ÷ 10,000 = 4.50 m². Dividing by 100 instead of 10,000, treating area like a length conversion, gives 45,000 ÷ 100 = 450.00 m², a common mistake since 1 m = 100 cm. Multiplying by 100 instead of dividing gives 45,000 × 100 = 4500000.00 m², using the conversion factor the wrong way round entirely. Dividing by 100,000 instead of 10,000 gives 0.45 m², an extra factor of 10 too far.
- (b) 6 litres — Method: find the volume of the cuboid in cm³, then change cm³ into litres using 1 litre = 1000 cm³. Working: 30 × 20 × 10 = 6000 cm³, and 6000 ÷ 1000 = 6. Answer: 6 litres. The distractors: 60 litres comes from using 1 litre = 100 cm³; 600 litres comes from using 1 litre = 10 cm³; 0.6 litres comes from using 1 litre = 10 000 cm³.
- (a) 135 minutes — Method: to change hours into minutes, multiply by 60. Working: 2.25 × 60 = 135 minutes. So the film runs for 135 minutes. Distractor 145 minutes comes from reading the '.25' as 25 minutes instead of a quarter of an hour, giving 2 hours 25 minutes. Distractor 225 minutes comes from multiplying by 100 instead of 60. Distractor 150 minutes comes from rounding 2.25 hours to 2.5 hours before converting.
- (c) 600 centilitres — Method: changing a larger unit into a smaller one means multiplying by the conversion factor given in the question. Working: 6 × 100 = 600. Answer: 600 centilitres. The distractors: 60 centilitres comes from multiplying by 10, as if a litre held 10 centilitres; 6000 centilitres comes from multiplying by 1000, which is the number of millilitres in a litre, not centilitres; 106 centilitres comes from adding 100 and 6 instead of multiplying.
- (a) 5 — Pressure = force ÷ area = 20 ÷ 4 = 5 pascals. Getting 80 comes from multiplying the force and area instead of dividing. Getting 16 comes from subtracting the area from the force (20 − 4 = 16) instead of dividing. Getting 24 comes from adding the force and area (20 + 4 = 24) instead of dividing.
- (c) 920 kg/m³ — Convert each unit in turn. Mass: 1 g = 0.001 kg. Volume: 1 m³ = 100 × 100 × 100 = 1 000 000 cm³. So a density of 0.92 g per cm³ is 0.92 × 1 000 000 = 920 000 g in every cubic metre, and 920 000 g = 920 000 × 0.001 = 920 kg. The two conversions leave a single factor of 1 000 000 × 0.001 = 1000, so in one step multiply g/cm³ by 1000: 0.92 × 1000 = 920 kg/m³. Multiplying by 100 instead of 1000 gives 92 kg/m³, using the factor for 1 m² rather than 1 m³ of volume. Multiplying by 10 instead of 1000 gives 9.2 kg/m³, moving the decimal point one place for a conversion that moves it three. Dividing by 1000 instead of multiplying gives 0.00092 kg/m³, going the wrong way between the units — a kilogram is heavier than a gram, but a cubic metre is a million times bigger than a cubic centimetre, so the number must get larger, not smaller. The liquid's density is 920 kg/m³.
Build your own mix at the worksheet builder.