Printable · GCSE Higher · ages 14-16
Equation of a circle and its tangent worksheet — GCSE Higher
Fifteen questions on "equation of a circle and its tangent" — DfE statement A16. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Higher only
Answer key: Equation of a circle and its tangent worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (b) 25 — The tangent at (9, 12) is 9x + 12y = 225. Setting y = 0 (the x-axis): 9x = 225, so x = 25. Choosing 18.75 comes from swapping the coefficients in the tangent equation (using 12x + 9y = 225) before setting y = 0. Choosing 15 is where the circle itself meets the x-axis (from x² = 225), not where the tangent does. Choosing 9 is just the x-coordinate of the original point (9, 12), not the point P.
- (c) 14.1 — Method: in x² + y² = r² the right-hand side is the square of the radius, so take its square root to find the radius, then double the radius because the diameter is twice the radius. Working: r² = 50, so r = √50 = 7.07106…, and the diameter is 2 × 7.07106… = 14.14213…, which is 14.1 correct to 1 decimal place. Answer: 14.1. The distractors: 7.1 is the radius, worked out correctly but never doubled, so it answers a question about the radius rather than the diameter; 100.0 comes from doubling the 50 on the right-hand side, treating r² as though it were already the radius; 25.0 comes from halving the 50, treating r² as though it were already the diameter.
- (a) 16 — A and B share the same y-coordinate, so the distance between them is the horizontal difference between their x-coordinates: 8 − (−8) = 16, giving a chord of length 16. Choosing 8 gives only the x-coordinate of one point, not the full distance between the two points. Choosing 34 is the diameter of the circle (2 × 17), not the length of this particular chord. Choosing 17 is the radius — the distance from the centre to A or to B, not from A to B.
- (b) (0, 6) and (0, −6) — Method: every point on the y-axis has x-coordinate 0, so substitute x = 0 into the equation of the circle and solve for y, remembering that a square root has a negative value as well as a positive one. Working: putting x = 0 into x² + y² = 36 leaves y² = 36, so y = 6 or y = −6, and the two crossings are (0, 6) and (0, −6). Answer: (0, 6) and (0, −6). The distractors: (0, 36) and (0, −36) use 36 itself as the distance from the centre, which reads r² as r; (6, 0) and (−6, 0) are the right distance from the centre but are the crossings of the x-axis, found by setting y = 0 instead of x = 0; (0, 18) and (0, −18) halve 36, treating the right-hand side of the equation as a diameter.
- (d) Yes, because 3² + 4² = 25. — A point lies on the circle x² + y² = 25 exactly when substituting its coordinates makes the equation true. Squaring each coordinate separately and adding: 3² + 4² = 9 + 16 = 25, which matches the right-hand side, so (3, 4) does lie on the circle. Adding the coordinates without squaring them, 3 + 4 = 7, and then reasoning that 7 is less than 25 happens to reach the same verdict, but it is not testing the equation of the circle at all — the circle equation depends on x² + y², not x + y. Squaring the sum instead of summing the squares, (3 + 4)² = 49, not 25, wrongly rules the point out. Doubling each coordinate instead of squaring it, so that 4² is taken as 8, gives 9 + 8 = 17, not 25, which also wrongly rules the point out.
- (b) x² + y² = 625 — Since (7, 24) lies on the circle, x² + y² = 7² + 24² = 49 + 576 = 625, so the equation is x² + y² = 625. Choosing x² + y² = 31 adds the coordinates 7 and 24 directly instead of squaring them first. Choosing x² + y² = 576 uses only 24² and forgets to add 7². Choosing x² + y² = 49 uses only 7² and forgets to add 24².
- (a) Outside: OQ² = 221 > r² = 169 — OQ² = 10² + 11² = 100 + 121 = 221. Comparing this with r² = 169: since 221 > 169, OQ > r, so Q lies outside the circle — this is the correct verdict AND the correct working. 'Outside: OQ = 21 (10 + 11) > r = 13' reaches the same Outside verdict, but by invalid working: it adds the coordinates instead of squaring them (10 + 11 = 21, rather than 10² + 11² = 221), so the stated 'OQ' of 21 is not a distance at all — the verdict happens to match, but the method is wrong. 'Inside: OQ ≈ 14.87 < r² = 169' correctly finds the distance OQ = √221 ≈ 14.87, but then compares that DISTANCE with r² = 169 instead of with r = 13 — comparing two different kinds of quantity gives a meaningless, and here wrong, verdict. 'Inside: OQ² = 221 < (2r)² = 676' confuses the radius with the diameter: it compares OQ² with the diameter squared, (2 × 13)² = 676, instead of with r² = 169.
- (d) x = 4 and x = −4 — Substituting y = 3 gives x² + 9 = 25, which simplifies to x² = 16, so x = 4 or x = −4. Choosing 'x = 3 and x = −3' uses the given value y = 3 as if it were the x-coordinate. Choosing 'x = 4' alone finds the positive square root of 16 but forgets the negative root. Choosing 'x = 5 and x = −5' skips subtracting 3² = 9 from 25 and takes the square root of 25 directly.
- (c) 50 — Method: the edge of the track is a circle centred on the origin, so it has equation x² + y² = r²; use the floodlight whose coordinates are given to find r², then substitute x = 0 to find where that circle meets the positive y-axis. Working: 30² + 40² = 900 + 1600 = 2500, so the edge of the track is x² + y² = 2500. Substituting x = 0 gives k² = 2500, so k = √2500 = 50, taking the positive root because k is positive. Answer: k = 50. The distractors: 2500 is r² used as though it were the radius, which would place the second floodlight fifty times too far from the centre; 70 adds the two coordinates, 30 + 40, instead of adding their squares; 40 takes the y-coordinate of the first floodlight to be the radius, which would only be true if that floodlight stood on the y-axis itself.
- (b) y = −3x/4 + 25 — Method: a straight line that touches a circle at one point is a tangent there, so it is perpendicular to the radius drawn to that point; find the gradient of the radius, take its negative reciprocal, then substitute the point of contact into y − y₁ = m(x − x₁). Working: the radius from (0, 0) to (12, 16) has gradient 16 ÷ 12, which cancels to 4/3, so the tangent has gradient −3/4. Substituting gives y − 16 = −3/4(x − 12), so y − 16 = −3x/4 + 9 and y = −3x/4 + 25. Answer: y = −3x/4 + 25. The distractors: y = 3x/4 + 7 turns the gradient of the radius upside down but leaves it positive, so the perpendicular step is only half done; y = −4x/3 + 32 changes the sign of the radius gradient without turning it upside down, which is the other half left undone; y = −3x/4 − 25 uses the correct gradient but substitutes the point of contact with both signs reversed, writing y + 16 = −3/4(x + 12).
- (b) −3/4 — The tangent to a circle at a point is always perpendicular to the radius drawn to that point. The radius from (0, 0) to (3, 4) has gradient 4/3. The gradient of a line perpendicular to a line with gradient m is the negative reciprocal, −1/m, so the tangent's gradient here is −3/4. Using the radius's own gradient, forgetting that the tangent is perpendicular to it, gives 4/3. Negating the radius's gradient without also taking the reciprocal gives −4/3. Taking the reciprocal of the radius's gradient without negating it gives 3/4.
- (d) y = −2x + 10 — Method: a tangent is perpendicular to the radius drawn to the point where it touches, so work out the gradient of that radius, take its negative reciprocal for the tangent, then substitute into y − y₁ = m(x − x₁). Working: the radius joins (0, 0) to (4, 2), so its gradient is 2 ÷ 4 = 1/2; turning 1/2 upside down gives 2 and changing the sign gives −2. Substituting into y − 2 = −2(x − 4) gives y − 2 = −2x + 8, so y = −2x + 10. Answer: y = −2x + 10. The distractors: y = −0.5x + 4 changes the sign of the radius gradient but never turns it upside down, using −1/2 where −2 belongs; y = 2x − 6 turns the gradient upside down but leaves it positive, using 2 where −2 belongs; y = −2x − 10 has the correct gradient but substitutes the point with both signs reversed, writing y + 2 = −2(x + 4) instead of y − 2 = −2(x − 4).
- (a) (15, 0) — Method: the tangent is perpendicular to the radius at the point of contact, so find the gradient of the radius, take its negative reciprocal, write the equation of the tangent, then substitute y = 0 because every point on the x-axis has y-coordinate 0. Working: the radius from (0, 0) to (3, 6) has gradient 6 ÷ 3 = 2, so the tangent has gradient −1/2. Substituting into y − 6 = −1/2(x − 3) gives y = −0.5x + 7.5. Setting y = 0 gives 0.5x = 7.5, so x = 15 and P is (15, 0). Answer: (15, 0). The distractors: (0, 7.5) is where the same tangent crosses the y-axis, reached by setting x = 0 instead of y = 0; (0, 0) comes from using the gradient of the radius, 2, for the tangent, which gives the line y = 2x through the centre and so crosses the x-axis at the origin; (6, 0) comes from changing the sign of the radius gradient without turning it upside down, which gives y = −2x + 12.
- (d) 2√2 — The radius satisfies r² = 8, so r = √8 = √(4 × 2) = √4 × √2 = 2√2. Choosing 8 forgets to take the square root of r² at all. Choosing 4 comes from halving 8 instead of finding its square root. Choosing √2 splits off the factor of 4 correctly but forgets to multiply the 2 back in front of the root.
- (a) (0, 7) and (0, −7) — A tangent is horizontal where the radius to that point is vertical, i.e. where the point lies on the y-axis. On x² + y² = 49, setting x = 0 gives y² = 49, so y = 7 or y = −7. The points are (0, 7) and (0, −7). (7, 0) and (−7, 0) comes from swapping the condition — these are the points where the tangent is VERTICAL, not horizontal (the radius there is horizontal). (0, 7) only comes from finding one valid point but forgetting that y² = 49 also gives the negative root, y = −7. (7, 0) only combines both mistakes: the wrong axis, and only one of the two roots.
Build your own mix at the worksheet builder.