Printable · GCSE Higher · ages 14-16
Translations and reflections of graphs worksheet — GCSE Higher
Fifteen questions on "translations and reflections of graphs" — DfE statement A13. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Higher onlyNon-calculator
Translations and reflections of graphs worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.The graph of y = f(x) has a minimum turning point at (4, −5). The graph of y = f(x) + a has a minimum turning point whose minimum VALUE is 2. Work out the value of a, and state the coordinates of the minimum turning point of y = f(x) + a.
- 2.The graph of y = f(x) has a minimum turning point at (3, 2). Write down the coordinates of the minimum turning point of the graph of y = f(x) + 5.
- 3.Describe the single transformation that maps the graph of y = f(x) onto the graph of y = f(−x).
- 4.The graph of y = f(x) has x-intercepts at x = −1 and x = 4. Which statement correctly describes the x-intercepts of y = f(2 − x)?
- 5.Describe a sequence of two transformations that maps the graph of y = x² onto the graph of y = −(x − 5)².y = x²
- 6.The graph of y = sin x is reflected in the x-axis to give the graph of y = g(x). Work out the value of g(90), where x is measured in degrees.y = sin(x)
- 7.The graph of y = sin x is transformed onto the graph of y = sin x + 1. Which statement correctly describes the transformation and the new range of the graph?y = sin(x)
- 8.The graph of y = f(x) crosses the x-axis at x = −3 and x = 7, and crosses the y-axis at (0, 21). A second graph crosses the x-axis at x = −7 and x = 3, and crosses the y-axis at the same point, (0, 21). The second graph is y = g(x). Which of these could be the equation of g(x)?
- 9.The graph of y = f(x) has a maximum turning point at (−1, 6). Write down the coordinates of the maximum turning point of the graph of y = f(x − 3).
- 10.The graph of y = cos x is transformed onto the graph of y = cos(x − 90°). State the direction of the translation and which standard graph the image is.y = cos(x)
- 11.Which of these equations represents the graph of y = 2ˣ translated by 3 units in the positive y-direction?
- 12.Using the table of values of f(x) (x = 0, 1, 2, 3 gives f(x) = 5, 8, 4, 1), work out the value of −f(x) when x = 1.
- 13.The graph of y = f(x) has x-intercepts at x = −2 and x = 6 and crosses the y-axis at (0, −12). Work out the x-intercepts and the y-intercept of y = −f(x).
- 14.The graph of y = f(x) passes through the point (2, 7). The graph of y = f(x) + a passes through the point (2, 3). Work out the value of a.
- 15.The graph of y = f(x) passes through the point (0, 4). Work out the y-coordinate of the point where the graph of y = −f(x) + 5 crosses the y-axis.
Answer key
- (b) a = 7; turning point (4, 2) — A vertical translation y = f(x) + a moves every point on the graph up or down by a, so the x-coordinate of the turning point stays at 4 and the minimum value becomes −5 + a. Setting −5 + a = 2 and solving gives a = 7, so the new turning point is (4, 2). Rearranging −5 + a = 2 with a sign error, treating it as a = −5 − 2, gives a = −7 while still landing on the correct turning-point coordinates. Correctly finding a = 7 but then writing down the original turning point instead of the shifted one gives (4, −5). Assuming a is simply equal to the new minimum value itself, ignoring the original −5 entirely, gives a = 2.
- (a) (3, 7) — y = f(x) + 5 is a vertical translation of y = f(x) by 5 units up — the translation vector is (0, 5) — so only the y-coordinate of any point changes. Turning point (3, 2) → (3, 2 + 5) = (3, 7). Adding the 5 to the x-coordinate, or treating it as a horizontal shift like y = f(x + 5), moves the wrong coordinate — check first whether the number sits inside or outside the brackets.
- (c) A reflection in the y-axis — Replacing x with −x reflects the graph in the y-axis: each point (x, y) maps to (−x, y). Reflecting the OUTPUT instead, y = −f(x), gives a reflection in the x-axis — that is a different function. Combining both reflections gives a rotation of 180° about the origin, and reflecting in the line y = x swaps the x- and y-values, which is what produces the inverse function, not f(−x). Check first which side of f the minus sign sits on.
- (d) Reflect in the y-axis, +2 in x; roots 3, −2 — f(2 − x) is zero exactly when 2 − x equals one of f's roots: 2 − x = −1 or 2 − x = 4. Solving each correctly (x = 2 − (−1) = 3, and x = 2 − 4 = −2) gives the new roots x = 3 and x = −2. This is the same as reflecting y = f(x) in the y-axis to get f(−x), then translating 2 units in the positive x-direction to get f(−(x − 2)) = f(2 − x). Solving 2 − x = k as x = k − 2 instead of x = 2 − k is a sign slip when rearranging, and gives x = −3 and x = 2. Translating +2 in x with no reflection at all uses f(x − 2), whose roots are the original roots plus 2: x = 1 and x = 6 — this misses the reflection completely. Assuming 'no overall change' wrongly treats a reflection-and-translation pair as always cancelling out, when here the roots genuinely move, from x = −1 and x = 4 to x = 3 and x = −2.
- (b) Translate +5 in x, then reflect in the x-axis. — Translating y = x² by 5 units in the positive x-direction gives y = (x − 5)². Reflecting this in the x-axis, which replaces y with −y, gives y = −(x − 5)², matching the target. Using a translation of −5 in x instead gives y = (x + 5)², and reflecting that in the x-axis gives y = −(x + 5)² — the sign inside the bracket is wrong. Reflecting in the y-axis first does nothing to y = x², since (−x)² = x², so translating afterwards only reaches y = (x − 5)² with no negative sign at all. Translating by 5 units in y instead of x gives y = x² + 5, and reflecting that in the x-axis gives y = −x² − 5, a different curve altogether — a vertical shift does not create the (x − 5)² term the target equation needs.
- (a) −1 — Reflecting y = sin x in the x-axis gives y = −sin x, so g(x) = −sin x. Since sin 90° = 1, g(90) = −1. Reading sin 90° = 1 and forgetting to apply the reflection gives 1. Misreading the angle as 0° instead of 90° gives sin 0° = 0, so 0. Confusing sin 90° with sin 30° = 0.5, then reflecting it, gives −0.5.
- (c) Translate +1 in y; new range 0 ≤ y ≤ 2 — Adding 1 to sin x translates the graph 1 unit in the positive y-direction, and every y-value on the range increases by 1: −1 + 1 = 0 and 1 + 1 = 2, giving a new range of 0 ≤ y ≤ 2. A translation in the x-direction would not add anything to the y-values, so 'Translate +1 in x; range unchanged' correctly leaves the range at −1 ≤ y ≤ 1 for that (wrong) transformation, but the transformation itself is not what y = sin x + 1 shows. 'Translate +1 in y; new range −2 ≤ y ≤ 0' correctly spots the translation but subtracts 1 from each bound instead of adding it. 'Reflect in the x-axis' mistakes the transformation for a reflection rather than a translation; reflecting sin x in the x-axis does leave the range at −1 ≤ y ≤ 1 unchanged in size, but that is not the transformation y = sin x + 1 actually applies.
- (b) y = f(−x) — y = f(−x) reflects the graph of y = f(x) in the y-axis: every x-coordinate changes sign. The x-intercepts −3 and 7 become 3 and −7, matching the second graph's intercepts −7 and 3. A point already on the y-axis is unaffected, since −0 = 0, so the y-intercept (0, 21) stays exactly where it is — matching the second graph as well. y = −f(x) leaves the x-intercepts unchanged at −3 and 7, since f(x) = 0 exactly where −f(x) = 0, which does not match; it also sends the y-intercept to (0, −21), a second mismatch. y = −f(−x) does send the x-intercepts to the right places, −7 and 3, but it sends the y-intercept to (0, −21) instead of (0, 21), so it fails the second clue. y = f(x) − 4 moves every point down 4, sending the y-intercept to (0, 17) instead of (0, 21), so it fails the y-axis clue. Test each option against BOTH clues — the pair of x-intercepts and the point on the y-axis — because more than one option gets only one of the two right.
- (b) (2, 6) — y = f(x − 3) translates y = f(x) horizontally by 3 units to the RIGHT — inside the brackets, subtracting moves the graph in the positive x-direction. Turning point (−1, 6) → (−1 + 3, 6) = (2, 6). The common slip is to move LEFT instead, since the sign inside the bracket is negative — that gives (−4, 6). Changing the y-coordinate instead of the x-coordinate, as in (−1, 3) or (−1, 9), treats this as a vertical shift, which y = f(x − 3) is not.
- (a) Positive x-direction, 90°; image is y = sin x. — Writing cos(x − 90°) as cos(x − a) with a = 90 shows this is a horizontal translation, y = f(x − a), which moves the graph 90° in the positive x-direction; the identity cos(x − 90°) = sin x confirms the image is y = sin x. Choosing the negative x-direction reverses the sign inside the bracket — subtracting inside the bracket always translates in the positive x-direction, not the negative one, so that statement is wrong on direction. Getting the direction right but conflating the subtraction inside the bracket with an extra reflection of the output flips the sign of the resulting graph, wrongly giving y = −sin x. Treating the subtraction as if it changed the output directly, rather than the input, wrongly calls this a vertical translation even while still correctly recalling that the image simplifies to y = sin x.
- (a) y = 2ˣ + 3 — A translation of 3 units in the positive y-direction shifts the whole graph up, which means adding to the output: y = f(x) + k with k = 3, so the image is y = 2ˣ + 3. Adding the 3 inside the power instead of outside it, which translates the graph horizontally instead of vertically, gives y = 2ˣ⁺³. Using a negative 3, which moves the graph down instead of up, gives y = 2ˣ − 3. Mistaking 2ˣ for the linear expression 2x and adding 3 inside brackets gives y = 2(x + 3).
- (a) −8 — −f(x) means take the output value from the table and change its sign, without changing which x-value is looked up. From the table, f(1) = 8, so −f(1) = −8. Reading f(1) = 8 from the table but forgetting to apply the negative sign gives 8. Misreading the row and using f(0) = 5 instead of f(1) = 8, then negating it, gives −5. Confusing −f(x) with f(x) − 1 — taking f(1) = 8 and subtracting 1 instead of negating — gives 7.
- (d) x = −2, x = 6; y-intercept (0, 12) — Reflecting y = f(x) in the x-axis, to get y = −f(x), negates every y-value but leaves every x-value fixed. The x-intercepts happen where y = 0, and −0 = 0, so they are unaffected: y = −f(x) still crosses the x-axis at x = −2 and x = 6. The y-intercept is the value at x = 0: f(0) = −12, so −f(0) = 12, giving the point (0, 12) — the sign flips because the y-intercept is a nonzero y-value, unlike the roots. Writing 'x = 2, x = −6; y-intercept (0, −12)' comes from confusing −f(x) with f(−x) — reflecting in the y-axis instead of the x-axis, which negates the x-values of the intercepts (turning −2 into 2 and 6 into −6) but leaves f(0) unchanged, since f(−0) = f(0) = −12. Writing 'x = −2, x = 6; y-intercept (0, −12)' comes from forgetting that −f(x) is a reflection at all, and assumes both intercepts stay exactly as they were. Writing 'x = 2, x = −6; y-intercept (0, 12)' correctly negates the y-intercept but wrongly negates the x-intercepts too, as if a reflection in the x-axis also flipped the sign of every x-value.
- (c) −4 — f(2) = 7, and y = f(x) + a passing through (2, 3) means f(2) + a = 3, so 7 + a = 3, giving a = 3 − 7 = −4. Writing a = 4 comes from subtracting the wrong way round, 7 − 3 instead of 3 − 7. Writing a = 10 comes from adding the two y-values instead of subtracting one from the other. Writing a = 3 comes from taking the new y-coordinate as the value of a directly, without accounting for the original y-value of 7 at all.
- (c) 1 — At x = 0, f(0) = 4. Applying the transformations in order — reflect in the x-axis first, then translate up by 5 — gives −f(0) + 5 = −4 + 5 = 1. Applying the translation but forgetting the reflection gives f(0) + 5 = 9. Applying the reflection to the whole expression, including the +5, gives −f(0) − 5 = −9. Applying the reflection but forgetting the translation gives −f(0) = −4.
Build your own mix at the worksheet builder.