Printable · GCSE Higher · ages 14-16
Translations and reflections of graphs worksheet — GCSE Higher
Fifteen questions on "translations and reflections of graphs" — DfE statement A13. Print it, or print three versions so neighbours cannot copy by letter; the key gives the letter for each version.
Higher onlyNon-calculator
Answer key: Translations and reflections of graphs worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (b) Translate −90° in x, then translate −2 in y. — cos(x + 90°) translates the graph 90° in the NEGATIVE x-direction, since a positive shift inside the bracket moves a graph left, not right, and subtracting 2 afterwards translates it 2 units in the negative y-direction (down). So the sequence is: translate −90° in x, then translate −2 in y. Using +90° in x reverses the direction of the horizontal shift — the sign inside the bracket moves the graph the opposite way to what it looks like. Using +2 in y reverses the direction of the vertical shift; subtracting 2 outside the function moves the graph down, not up. Describing the −2 as a reflection in the x-axis is wrong because a reflection turns positive y-values negative and vice versa, whereas here every y-value is simply reduced by the fixed amount 2, which is what a translation does, not a reflection.
- (a) y = 2ˣ + 3 — A translation of 3 units in the positive y-direction shifts the whole graph up, which means adding to the output: y = f(x) + k with k = 3, so the image is y = 2ˣ + 3. Adding the 3 inside the power instead of outside it, which translates the graph horizontally instead of vertically, gives y = 2ˣ⁺³. Using a negative 3, which moves the graph down instead of up, gives y = 2ˣ − 3. Mistaking 2ˣ for the linear expression 2x and adding 3 inside brackets gives y = 2(x + 3).
- (b) y = 2x² + 14x + 19 — A translation by the vector (−2, 0) moves the graph 2 units in the negative x-direction, which means replacing x with (x + 2): 2(x + 2)² + 6(x + 2) − 1. Expanding 2(x + 2)² gives 2x² + 8x + 8, and 6(x + 2) gives 6x + 12; collecting terms 2x² + 8x + 8 + 6x + 12 − 1 simplifies to 2x² + 14x + 19. Substituting (x − 2) instead of (x + 2) — translating in the wrong direction — gives 2(x−2)² + 6(x−2) − 1, which simplifies to 2x² − 2x − 5. Distributing the outer 2 only onto the x² term of the expansion, instead of onto every term of (x + 2)², gives 2x² + 10x + 15. Dropping the −1 when collecting the constant terms, treating 8 + 12 as 20 rather than 8 + 12 − 1 as 19, gives 2x² + 14x + 20.
- (d) y = −f(x + 2) has a maximum turning point at (1, 5). — y = f(x + 2) translates the graph 2 units in the negative x-direction, so the turning point's x-coordinate moves from 3 to 1; reflecting in the x-axis then negates the y-coordinate, turning −5 into 5, and also turns a minimum into a maximum — giving a true maximum turning point at (1, 5). Translating the root at x = 1 in the wrong direction, adding 2 instead of subtracting it, gives x = 3, but the true image root is at 1 − 2 = −1, so that statement is false. Keeping the coordinates (1, 5) correct but forgetting that reflecting in the x-axis turns a minimum into a maximum gives a false "minimum turning point" statement. Getting the reflection's effect on the turning-point type right (a maximum) but translating the x-coordinate in the wrong direction, using 3 + 2 = 5 instead of 3 − 2 = 1, gives a false statement at (5, 5).
- (a) −1 — Reflecting y = sin x in the x-axis gives y = −sin x, so g(x) = −sin x. Since sin 90° = 1, g(90) = −1. Reading sin 90° = 1 and forgetting to apply the reflection gives 1. Misreading the angle as 0° instead of 90° gives sin 0° = 0, so 0. Confusing sin 90° with sin 30° = 0.5, then reflecting it, gives −0.5.
- (a) (4, 1) — y = −f(x) reflects the graph of y = f(x) in the x-axis: every point (x, y) maps to (x, −y). Applying this to (4, −1): the x-coordinate stays 4, and the y-coordinate −1 becomes its negative, 1. Leaving the y-coordinate unchanged skips the reflection entirely, giving (4, −1); reflecting the x-coordinate instead, or reflecting both, mixes this up with a reflection in the y-axis or a rotation, giving (−4, −1) or (−4, 1).
- (d) y = x² − 10x + 21 — A translation by the vector (3, 0) moves the graph 3 units in the positive x-direction, which means replacing every x in the equation with (x − 3). Substitute into x² − 4x: (x − 3)² − 4(x − 3). Expand (x − 3)² to x² − 6x + 9, and expand −4(x − 3) to −4x + 12. Collecting like terms, x² − 6x + 9 − 4x + 12 = x² − 10x + 21, so the image is y = x² − 10x + 21. Substituting (x + 3) instead of (x − 3) — translating in the wrong direction — gives y = x² + 2x − 3. Adding 3 straight onto the original equation, treating the translation as vertical instead of horizontal, gives y = x² − 4x + 3. Expanding (x − 3)² as x² − 3x + 9, using −3x instead of −6x for the middle term, and then combining with −4(x − 3) gives y = x² − 7x + 21.
- (b) a = 7; turning point (4, 2) — A vertical translation y = f(x) + a moves every point on the graph up or down by a, so the x-coordinate of the turning point stays at 4 and the minimum value becomes −5 + a. Setting −5 + a = 2 and solving gives a = 7, so the new turning point is (4, 2). Rearranging −5 + a = 2 with a sign error, treating it as a = −5 − 2, gives a = −7 while still landing on the correct turning-point coordinates. Correctly finding a = 7 but then writing down the original turning point instead of the shifted one gives (4, −5). Assuming a is simply equal to the new minimum value itself, ignoring the original −5 entirely, gives a = 2.
- (b) Translate +5 in x, then reflect in the x-axis. — Translating y = x² by 5 units in the positive x-direction gives y = (x − 5)². Reflecting this in the x-axis, which replaces y with −y, gives y = −(x − 5)², matching the target. Using a translation of −5 in x instead gives y = (x + 5)², and reflecting that in the x-axis gives y = −(x + 5)² — the sign inside the bracket is wrong. Reflecting in the y-axis first does nothing to y = x², since (−x)² = x², so translating afterwards only reaches y = (x − 5)² with no negative sign at all. Translating by 5 units in y instead of x gives y = x² + 5, and reflecting that in the x-axis gives y = −x² − 5, a different curve altogether — a vertical shift does not create the (x − 5)² term the target equation needs.
- (b) y = f(−x) — y = f(−x) reflects the graph of y = f(x) in the y-axis: every x-coordinate changes sign. The x-intercepts −3 and 7 become 3 and −7, matching the second graph's intercepts −7 and 3. A point already on the y-axis is unaffected, since −0 = 0, so the y-intercept (0, 21) stays exactly where it is — matching the second graph as well. y = −f(x) leaves the x-intercepts unchanged at −3 and 7, since f(x) = 0 exactly where −f(x) = 0, which does not match; it also sends the y-intercept to (0, −21), a second mismatch. y = −f(−x) does send the x-intercepts to the right places, −7 and 3, but it sends the y-intercept to (0, −21) instead of (0, 21), so it fails the second clue. y = f(x) − 4 moves every point down 4, sending the y-intercept to (0, 17) instead of (0, 21), so it fails the y-axis clue. Test each option against BOTH clues — the pair of x-intercepts and the point on the y-axis — because more than one option gets only one of the two right.
- (a) 3 — y = f(x + 2) is f(x) translated 2 units to the LEFT (inside the bracket, adding moves the graph in the negative x-direction). The root moves with the whole graph: 5 − 2 = 3. Moving right instead of left gives 7; assuming a bracket shift leaves the root unchanged gives 5; writing down the shift amount 2 itself skips the translation altogether.
- (c) Week 16, £37,000 — y = f(x − 6) − 8000 combines a horizontal translation of 6 units RIGHT (subtracting 6 inside the brackets) with a vertical translation of £8000 DOWN (subtracting 8000 outside). Applying both to the maximum (10, 45000): 10 + 6 = 16, so the new maximum is in week 16. And 45000 − 8000 = 37000, so the maximum weekly profit is £37,000.
- (d) −2 — y = f(x) − 6 is f(x) shifted down by 6, so every y-value on the graph decreases by 6. At x = 0, f(0) = 4, so the new y-value is 4 − 6 = −2. Adding 6 instead of subtracting gives 10; writing down the shift itself, −6, or leaving the original value 4 unchanged both skip the translation altogether.
- (c) A reflection in the y-axis — Replacing x with −x reflects the graph in the y-axis: each point (x, y) maps to (−x, y). Reflecting the OUTPUT instead, y = −f(x), gives a reflection in the x-axis — that is a different function. Combining both reflections gives a rotation of 180° about the origin, and reflecting in the line y = x swaps the x- and y-values, which is what produces the inverse function, not f(−x). Check first which side of f the minus sign sits on.
- (a) x = 2, x = 7; y-intercept cannot be found here — Translating y = f(x) to y = f(x − 3) shifts the graph 3 units to the right, so each root increases by 3: x = −1 becomes x = 2, and x = 4 becomes x = 7. The y-intercept is the value at x = 0, which for this new graph is f(0 − 3) = f(−3) — and f(−3) is not one of the values given, so the new y-intercept cannot be worked out from the information given. Writing 'y-intercept stays at (0, −8)' wrongly assumes a horizontal translation leaves the y-intercept unchanged — it generally does not, since it moves the whole graph sideways, including the point that used to sit on the y-axis. Writing roots at x = −4 and x = 1 comes from translating 3 units to the LEFT instead of to the right — f(x − 3) shifts the graph in the positive x-direction, not the negative direction.
Build your own mix at the worksheet builder.