Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.The table shows the height, in metres, of a firework rocket at various times, in seconds, during its flight: 40 at t = 2, 54 at t = 3, and 60 at t = 4. Use the chord between t = 2 and t = 4 to estimate the gradient of the height-time graph at t = 3, stating the correct units.
- 2.Work out the maximum value of y = sin x, and the smallest positive value of x, in degrees, at which it occurs.y = sin(x)
- 3.The area of a circle is given by the formula A = πr², where r is the radius. Rearrange the formula to make r the subject.
- 4.A student attempts to prove that the product of two consecutive integers is always even: (i) Let the two consecutive integers be n and n + 1. (ii) Since n(n + 1) is even, one of n and n + 1 must be an even number. (iii) Therefore, n(n + 1) is even. At which statement does the proof first assume the very fact it is trying to prove?
- 5.Subtract, giving your answer as a single fraction in its simplest form: 4/(x − 1) − 2/(x + 3)
- 6.To rearrange the formula y = 3x − 8 to make x the subject, Priya writes: 'Add 8 to both sides to get y + 8 = 3x, then divide both sides by 3 to get x = y + 8 ÷ 3.' Work out the correct expression for x.y = 3x − 8
- 7.A fundraising chain letter starts with 3 people taking part in round 1. Each following round has 4 times as many people taking part as the round before. Work out the number of people taking part in round 4.
- 8.A triangle has vertices at (1, 1), (1, 5) and (6, 1). Work out the area of the triangle.
- 9.Expand and simplify (x + 1)(x + 2)(x + 3).
- 10.The trapezium rule is used to estimate the area under a curve between x = 2 and x = 6. The curve is concave up (it curves upwards, like the inside of a bowl) throughout this interval. Which statement about the estimate is correct?
- 11.Three consecutive integers add up to 72. Using n for the smallest integer, form an equation and solve it to find the smallest of the three integers.
- 12.The tangent to a curve at the point (5, 2) is the line y = mx + c. This tangent crosses the y-axis at (0, −8). Work out the gradient, m, of the tangent.
- 13.An arithmetic sequence has first term 40 and common difference −6. Work out the 9th term of the sequence.
- 14.A ball's height, h metres, t seconds after being thrown follows h = (t − 1)(9 − t). Given that the ball is at ground level at t = 1 and t = 9, work out at what time t the ball reaches its maximum height, using symmetry.
- 15.The first five terms of a quadratic sequence are 4, 7, 12, 19, 28. Work out an expression, in terms of n, for the nth term.
Answer key
- (c) 10 m/s — A symmetric chord gradient uses the two points either side of t = 3: (2, 40) and (4, 60). The gradient is the change in height divided by the change in time: (60 − 40) ÷ (4 − 2) = 20 ÷ 2 = 10 m/s. Using only the values either side of one gap, (2, 40) and (3, 54), instead of the full symmetric chord, gives (54 − 40) ÷ (3 − 2) = 14 m/s. Getting the correct number but dropping the time unit, leaving only metres, gives 10 m. Dividing time by height instead of height by time inverts the calculation to (4 − 2) ÷ (60 − 40) = 0.1 s/m.
- (b) 1 at x = 90° — The graph of y = sin x rises from (0°, 0) to its maximum value of 1 at x = 90°, a quarter of the way through the period. Thinking the maximum occurs where the graph crosses the y-axis, at the start of the curve, gives 1 at x = 0°, but sin 0° = 0, not the maximum. Thinking the maximum occurs halfway to x = 360°, rather than a quarter of the way, gives 1 at x = 180°, but sin 180° = 0, not the maximum. Swapping the roles of the maximum value and the x co-ordinate at which it occurs gives 90 at x = 1, but the maximum value of sin x is 1, not 90.
- (c) r = √(A/π) — A = πr² means r has been squared and then multiplied by π. To make r the subject, first divide both sides by π to get A/π = r², then take the square root of both sides: r = √(A/π). Writing r = A/π stops after dividing by π and forgets that r is still squared — it never undoes the square. Writing r = √A/π takes the square root before dividing by π, which square-roots only the A and not the whole of A/π. Writing r = (A/π)² squares A/π instead of taking its square root — the opposite of what is needed to undo r². The correct rearrangement is r = √(A/π).
- (c) Statement (ii) — Statement (ii) opens with 'Since n(n + 1) is even', treating the very fact the proof is meant to establish as if it were already known — that is circular reasoning, assuming the conclusion to help derive itself. Statement (i) only names the two consecutive integers as n and n + 1; it makes no claim about whether their product is even, so it introduces nothing circular. Statement (iii) states the conclusion, and would be a valid final step if statement (ii) had reached 'one of n and n + 1 is even' by a genuine argument, such as considering the cases where n is even or odd separately. Saying the proof assumes nothing circular is wrong, because statement (ii)'s opening clause is exactly that assumption.
- (b) (2x + 14)/((x − 1)(x + 3)) — To subtract these fractions, write them over the common denominator (x − 1)(x + 3): the numerator becomes 4(x + 3) − 2(x − 1). Expanding gives 4x + 12 − 2x + 2, which simplifies to 2x + 14, so the answer is (2x + 14)/((x − 1)(x + 3)). Writing (2x + 11)/((x − 1)(x + 3)) comes from not distributing the minus sign fully across the second bracket, treating −2(x − 1) as −2x − 1 instead of −2x + 2. Writing 2/((x − 1)(x + 3)) comes from subtracting the two original numerators directly, 4 − 2 = 2, the same mistake as subtracting fractions without a common denominator. Writing (2x − 10)/((x − 1)(x + 3)) comes from swapping which numerator multiplies which bracket, forming 4(x − 1) − 2(x + 3) instead of 4(x + 3) − 2(x − 1).
- (d) x = (y + 8) / 3 — Method: add 8 to both sides, then divide the whole side by 3. Working: y = 3x − 8, so adding 8 to both sides gives y + 8 = 3x, then dividing both sides by 3 gives x = (y + 8) / 3. The value x = y + 8 / 3 is Priya's version, which comes from dividing only the 8 by 3 instead of dividing the whole expression y + 8 by 3. The value x = (y − 8) / 3 comes from a sign error, keeping −8 instead of moving it to +8. The value x = 3(y + 8) comes from multiplying by 3 instead of dividing.
- (b) 192 — This is a geometric sequence with first term 3 and common ratio 4: round 2 has 3 × 4 = 12, round 3 has 12 × 4 = 48, round 4 has 48 × 4 = 192. A candidate who applies the ×4 multiplier four times instead of three gets 3 × 4⁴ = 768. A candidate who wrongly treats the growth as arithmetic, taking the round 2 figure of 12 as a fixed amount added each round, gets 3, 15, 27, 39. A candidate who forgets the starting 3 people and just works out 4⁴ gets 256.
- (d) 10 — The right angle is at (1, 1). The vertical side has length 5 − 1 = 4 and the horizontal side has length 6 − 1 = 5, so the area is (4 × 5) ÷ 2 = 20 ÷ 2 = 10. A candidate who forgets to halve the product of the two sides gets 4 × 5 = 20. A candidate who forgets to subtract the shared vertex's coordinate and uses the raw coordinates 6 and 5 as the side lengths gets (6 × 5) ÷ 2 = 30 ÷ 2 = 15. A candidate who uses only one side length as the area gets 5.
- (d) x³ + 6x² + 11x + 6 — (x + 1)(x + 2) = x² + 3x + 2. Multiplying by (x + 3): (x² + 3x + 2)(x + 3) = x³ + 3x² + 2x + 3x² + 9x + 6, which simplifies to x³ + 6x² + 11x + 6. Choosing x³ + 6x² + 6x + 6 has the right x² and constant terms but adds 1 + 2 + 3 = 6 for the x-coefficient instead of the correct sum of pairwise products 1×2 + 1×3 + 2×3 = 11. Choosing x³ + 5x² + 11x + 6 sums only two of the three constants (2 + 3 = 5) for the x² coefficient, leaving out the 1. Choosing x³ + 6x² + 11x + 5 adds the last two constants (2 + 3 = 5) instead of multiplying all three (1 × 2 × 3 = 6) for the constant term.
- (a) Overestimates — trapezium edges lie above the curve. — For a concave-up curve, each chord connecting two points on the curve lies ABOVE the curve between those points, because the curve bends away from the chord underneath it. The trapezium rule uses these chords as the top edges of each trapezium, so the trapeziums cover a larger region than the true area under the curve — the estimate is an overestimate. Saying it underestimates because the edges lie below the curve gets the direction backwards: for a concave-up curve the edges lie above, not below. Saying it overestimates 'because more strips always increase it' gives the right verdict for the wrong reason — using MORE, narrower strips makes a trapezium estimate more accurate and brings it closer to the true area, it does not simply increase the total. Saying the estimate is exact ignores that straight edges cannot follow a curved line perfectly; there is always a gap between the chord and the curve on a bend, which is exactly what makes the rule an estimate rather than an exact calculation.
- (d) 23 — Method: let the smallest integer be n, so the three consecutive integers are n, n + 1 and n + 2. Form the equation n + (n + 1) + (n + 2) = 72. Working: simplify the left side: 3n + 3 = 72, so 3n = 69, giving n = 23. Answer: 23. 24 comes from dividing 72 by 3 directly, 72 ÷ 3 = 24, which finds the middle integer rather than realising the three numbers differ. 25 comes from correctly finding n = 23 but reading off the largest integer, n + 2, instead of the smallest as asked. 21 comes from dividing first and subtracting after, (72 ÷ 3) − 3, instead of subtracting 3 before dividing by 3.
- (d) 2 — The gradient between two points on a line is the change in y divided by the change in x. Using (5, 2) and (0, −8): (2 − (−8)) ÷ (5 − 0) = 10 ÷ 5 = 2. Inverting the fraction, dividing the change in x by the change in y instead, gives 5 ÷ 10 = 0.5. Reversing the order of the x-values in the denominator, giving (2 − (−8)) ÷ (0 − 5) = 10 ÷ (−5), gives −2. Misreading the y-intercept as 8 instead of −8, giving (2 − 8) ÷ 5 = −6 ÷ 5, gives −1.2.
- (c) −8 — The nth term is the first term plus (n − 1) lots of the common difference: 40 + 8 × (−6) = 40 − 48 = −8. A candidate who uses 9 lots of the common difference instead of 8 gets 40 + 9 × (−6) = −14. A candidate who treats the common difference as +6 instead of −6 gets 40 + 8 × 6 = 88. A candidate who uses only 7 lots of the common difference gets 40 + 7 × (−6) = −2.
- (d) t = 5 — The maximum height occurs halfway between the two times when the ball is at ground level: the midpoint of t = 1 and t = 9 is (1 + 9) ÷ 2 = 5, so the ball reaches its maximum height at t = 5 seconds. Getting t = 4 comes from halving the DIFFERENCE between the times, 9 − 1 = 8, then 8 ÷ 2 = 4, instead of finding their midpoint. Getting t = 8 uses that difference, 9 − 1 = 8, as if the gap between the two times were itself the time of the maximum. Getting t = 10 adds the two times, 1 + 9 = 10, but forgets to divide by 2.
- (d) n² + 3 — First differences: 3, 5, 7, 9. Second differences: 2, 2, 2, so the sequence is quadratic and the coefficient of n² is half the second difference: a = 2 ÷ 2 = 1. Subtracting n² (1, 4, 9, 16, 25) from the terms (4, 7, 12, 19, 28) leaves 3, 3, 3, 3, 3, a constant, so the nth term is n² + 3. Using the second difference itself as a, without halving it, gives 2n² + 3. Finding a = 1 correctly but then dropping the constant remainder gives n². Treating the first first difference (3) as a common difference and building a linear formula a + (n − 1)d = 4 + 3(n − 1) gives 3n + 1, which fits only the first term.
Build your own mix at the worksheet builder.