Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.Line L has equation y = 2x + 3. Work out the equation of the line perpendicular to L that passes through the point (4, 1), giving your answer in the form x + 2y = c.y = 2x + 3
- 2.A square tile has an area of 144 cm². Work out the side length of the tile.
- 3.The formula y = x² + 1 gives y in terms of x. Work out the value of y when x = −2.y = x² + 1
- 4.The simultaneous equations 2x + 3y = 12 and x − y = 1 are given. Work out the value of y.
- 5.Make x the subject of the formula y = (x − 4)/5.
- 6.A ribbon of length L metres is cut into 5 equal pieces, and then 3 metres is removed from one piece. Write down an expression, in metres, for the length of that piece after 3 metres is removed.
- 7.A proof that (n + 3)² − (n − 3)² is always a multiple of a certain number begins: Line 1: (n + 3)² − (n − 3)² = (n² + 6n + 9) − (n² − 6n + 9). Which expression correctly completes Line 2?
- 8.A bacteria colony doubles every 4 hours and its size is recorded only every 4 hours. The recorded population 20 hours after the start is 9,600. After how many hours did the recorded population first exceed 1,000?
- 9.Solve x² − 100 = 0.
- 10.The graph of y = f(x) has roots at x = −1 and x = 4, and crosses the y-axis at (0, −8). Which statement about the graph of y = f(x − 3) is correct?
- 11.To solve 6x − 4 = 2x + 20, Yusuf's first step is to subtract 2x from both sides. Work out what equation this gives.
- 12.The graph of y = sin x is transformed onto the graph of y = sin x + 1. Which statement correctly describes the transformation and the new range of the graph?y = sin(x)
- 13.A sequence is defined by aₙ = aₙ₋₁ + aₙ₋₂ for n ≥ 3. Given that a₃ = 11 and a₅ = 29, work out a₁.
- 14.Solve the inequality 2(x − 1) ≤ 8.
- 15.The perimeter of a rectangle is given by the formula P = 2(l + w), where l is the length and w is the width. A rectangular garden has a perimeter of 46 m and a length of 14 m. Rearrange the formula to make w the subject, then work out the width of the garden.
Answer key
- (c) x + 2y = 6 — L has gradient 2, so the perpendicular gradient is −1/2. Substituting (4, 1) into y − 1 = −(1/2)(x − 4): y = −(1/2)x + 2 + 1 = −(1/2)x + 3, so 2y = −x + 6, giving x + 2y = 6. Distractor routes: x − 2y = 2 comes from using gradient +1/2 instead of −1/2, forgetting the negative sign the perpendicular rule needs. x + 2y = 9 comes from swapping the point's coordinates, substituting (1, 4) instead of (4, 1). x + 2y = −2 comes from a sign error distributing the negative gradient over the bracket, computing −(1/2)(x − 4) as −(1/2)x − 2 instead of −(1/2)x + 2.
- (c) 12 cm — For a square, area = side². So side² = 144, giving side = ±12. Since a length must be positive, the side length is 12 cm. A candidate who gives both square roots without rejecting the negative one, which cannot be a length, answers 12 cm or −12 cm. A candidate who halves 144 instead of taking its square root gets 72 cm. A candidate who divides 144 by 4, confusing the area formula with a perimeter calculation, gets 36 cm.
- (c) 5 — Method: substitute the value into the formula, work out the index first and the addition afterwards. Working: x² = (−2) × (−2) = 4, so y = 4 + 1 = 5. Answer: 5. The distractors: −3 comes from squaring only the 2 and keeping the minus sign outside the index, giving −4 + 1; 1 comes from adding the 1 to x before squaring, giving (−2 + 1)²; 4 comes from squaring correctly but stopping there and never adding the 1.
- (a) y = 2 — Method: make x the subject of the simpler equation, substitute it into the other equation and then read off the letter the question asks for. Working: x − y = 1 gives x = y + 1, so 2x + 3y = 12 becomes 2(y + 1) + 3y = 12, that is 2y + 2 + 3y = 12, so 5y = 10 and y = 2. Answer: y = 2, and the matching value x = 3 checks in 2 × 3 + 3 × 2 = 12. The distractors: y = 3 comes from solving the pair correctly and then writing down the value of x; y = 2.2 comes from expanding 2(y + 1) as 2y + 1, which leaves 5y = 11; y = 10 comes from rearranging x − y = 1 as x = 1 − y, which turns the first equation into 2 + y = 12.
- (d) x = 5y + 4 — To make x the subject of y = (x − 4)/5, first multiply both sides by 5 to clear the fraction: 5y = x − 4, then add 4 to both sides: x = 5y + 4. Writing x = 5y − 4 multiplies correctly but keeps the minus sign on the 4 instead of changing it to a plus when moving it across. Writing x = y/5 + 4 divides by 5 instead of multiplying, the wrong inverse of the fraction. Writing x = 5(y + 4) adds 4 before multiplying by 5, reversing the correct order of the two steps. The correct rearrangement is x = 5y + 4.
- (c) L/5 − 3 — Each of the 5 equal pieces is L/5 metres long, and removing 3 metres from one piece gives L/5 − 3. Subtracting the 3 metres before dividing by 5, (L − 3)/5, divides the removed length between all 5 pieces instead of taking it from just one. Dividing only the 3 by 5 instead of dividing L by 5, L − 3/5, divides the wrong number. Writing 5/L − 3 inverts the fraction, swapping which number is the numerator.
- (b) 12n — Distributing the minus sign across the second bracket gives n² + 6n + 9 − n² + 6n − 9, and the n² terms and the +9/−9 cancel, leaving 6n + 6n = 12n. Writing 18 comes from only negating the first term of the second bracket, n², and treating the −6n and +9 as unchanged, which gives n² + 6n + 9 − n² − 6n + 9 = 18. Writing 2n² + 18 comes from adding the two brackets instead of subtracting them, (n² + 6n + 9) + (n² − 6n + 9) = 2n² + 18. Writing 6n comes from correctly negating the bracket but then only counting one of the two 6n terms, missing that they add rather than cancel.
- (d) 8 — Working backwards by halving (undoing the doubling), one 4-hour step at a time: 9,600 (20 h) → 4,800 (16 h) → 2,400 (12 h) → 1,200 (8 h) → 600 (4 h) → 300 (0 h). Reading these in time order — 300, 600, 1,200, 2,400, 4,800, 9,600 at 0, 4, 8, 12, 16, 20 hours — the population is still at or below 1,000 at 4 hours (600) and first goes above 1,000 at 8 hours (1,200). So the recorded population first exceeds 1,000 at 8 hours. Answering 20 just reads off the time stated in the question, without working out when the threshold was actually first crossed — wrong, because 9,600 is only the value AT 20 hours, not necessarily the first time the population passed 1,000. Answering 0 comes from recovering the starting population by dividing 9,600 by 5 (the number of 4-hour gaps up to 20 hours) instead of by 2⁵ = 32 (the correct number of halvings), giving a wrongly-inflated starting value of 9,600 ÷ 5 = 1,920 — already above 1,000 at 0 hours — wrong, because doubling means the value must be halved five times, dividing by 2 five times (2⁵ = 32), not divided once by the number of gaps. Answering 12 comes from halving back only twice, from 9,600 to 4,800 (16 h) to 2,400 (12 h), and stopping there because 2,400 is already above 1,000, without checking that 1,200 at 8 hours is also above 1,000 and occurs earlier — wrong, because the FIRST recorded time above 1,000 is the earliest such time, not the first one reached while working backwards from 20 hours.
- (a) x = 10 or x = −10 — Rearranging, x² = 100. Taking the square root of both sides gives x = ±10, i.e. x = 10 or x = −10. A candidate who forgets the negative root gives only x = 10. A candidate who halves 100 instead of taking its square root gets x = 50. A candidate who applies the ± sign to 100 itself instead of to its square root gets x = 100 or x = −100.
- (a) x = 2, x = 7; y-intercept cannot be found here — Translating y = f(x) to y = f(x − 3) shifts the graph 3 units to the right, so each root increases by 3: x = −1 becomes x = 2, and x = 4 becomes x = 7. The y-intercept is the value at x = 0, which for this new graph is f(0 − 3) = f(−3) — and f(−3) is not one of the values given, so the new y-intercept cannot be worked out from the information given. Writing 'y-intercept stays at (0, −8)' wrongly assumes a horizontal translation leaves the y-intercept unchanged — it generally does not, since it moves the whole graph sideways, including the point that used to sit on the y-axis. Writing roots at x = −4 and x = 1 comes from translating 3 units to the LEFT instead of to the right — f(x − 3) shifts the graph in the positive x-direction, not the negative direction.
- (b) 4x − 4 = 20 — Method: subtract 2x from both sides of the equation, and simplify each side separately. Working: left side: 6x − 4 − 2x = 4x − 4. Right side: 2x + 20 − 2x = 20. Answer: 4x − 4 = 20. 4x = 20 drops the −4 from the left side, as though subtracting 2x also removes the constant term. 8x − 4 = 20 comes from moving the 2x across to the left without changing its sign: it is taken off the right side correctly, leaving 20, but added to the left side instead of subtracted, giving 6x + 2x = 8x. 4x − 4 = 2x + 20 comes from subtracting 2x from the left-hand side only and leaving the right-hand side unchanged; whatever is done to one side must be done to the other.
- (c) Translate +1 in y; new range 0 ≤ y ≤ 2 — Adding 1 to sin x translates the graph 1 unit in the positive y-direction, and every y-value on the range increases by 1: −1 + 1 = 0 and 1 + 1 = 2, giving a new range of 0 ≤ y ≤ 2. A translation in the x-direction would not add anything to the y-values, so 'Translate +1 in x; range unchanged' correctly leaves the range at −1 ≤ y ≤ 1 for that (wrong) transformation, but the transformation itself is not what y = sin x + 1 shows. 'Translate +1 in y; new range −2 ≤ y ≤ 0' correctly spots the translation but subtracts 1 from each bound instead of adding it. 'Reflect in the x-axis' mistakes the transformation for a reflection rather than a translation; reflecting sin x in the x-axis does leave the range at −1 ≤ y ≤ 1 unchanged in size, but that is not the transformation y = sin x + 1 actually applies.
- (a) 4 — a₅ = a₄ + a₃, so a₄ = a₅ − a₃ = 29 − 11 = 18. a₄ = a₃ + a₂, so a₂ = a₄ − a₃ = 18 − 11 = 7. a₃ = a₂ + a₁, so a₁ = a₃ − a₂ = 11 − 7 = 4. Checking forwards: 4, 7, 11, 18, 29. Answering 7 stops one step early, reporting a₂ = 7 instead of continuing back one more step to a₁ — wrong, because the question asks for a₁, not a₂. Answering 18 reports a₄ = 18, an intermediate value found along the way, instead of a₁ — wrong, because a₄ is a term used to reach the answer, not the term the question asks for. Answering 3 takes one backward step too many, working out a further term a₀ = a₂ − a₁ = 7 − 4 = 3 — wrong, because the sequence starts at a₁, so a₁ = 4 is as far back as the question goes.
- (b) x ≤ 5 — Method: divide out the bracket first, then undo the number term; the inequality sign turns round only if both sides are multiplied or divided by a negative number. Working: dividing both sides of 2(x − 1) ≤ 8 by 2 gives x − 1 ≤ 4, and 2 is positive so the ≤ is unchanged; adding 1 to both sides gives x ≤ 5. Answer: x ≤ 5. The distractors: x ≤ 3 comes from subtracting 1 from 4 instead of adding 1 to both sides; x ≤ 4 comes from stopping at 8 ÷ 2 = 4 and never undoing the −1 inside the bracket; x < 5 comes from reading ≤ as a strict inequality, which wrongly leaves the boundary value out of the solution set.
- (a) 9 m — Undo the multiplication by the bracket first: dividing both sides by 2 gives P/2 = l + w. Subtracting the length from both sides gives w = P/2 − l. Substituting the measurements, 46 ÷ 2 = 23, and 23 − 14 = 9, so the width is 9 m. Taking the length off before halving gives (46 − 14) ÷ 2 = 16, which halves the length as well; expanding to P = 2l + 2w and then forgetting to divide by 2 gives 46 − 28 = 18; subtracting the length in the wrong direction gives 23 + 14 = 37.
Build your own mix at the worksheet builder.