Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.A zip-line runs from a platform 25 m high to a landing point 5 m high, over a horizontal distance of 40 m. Work out the gradient of the zip-line.
- 2.A walker's distance-time graph is described as follows: she walks 3 km in the first 15 minutes at a steady speed, rests for 10 minutes, then walks a further 3 km in the next 20 minutes, also at a steady speed. Work out her speed, in km/h, during the first 15 minutes.
- 3.A rectangular sheep pen has perimeter P, length l and width w, connected by the formula P = 2l + 2w. A farmer has 60 m of fencing for the perimeter and sets the width at 8 m. Work out the length of the pen.
- 4.A rectangular photo has length (x + 3) cm and width x cm. Its area is 40 cm². Work out the value of x.
- 5.A number, n, is doubled and then 7 is subtracted. The result is 15. Form an equation and solve it to find n.
- 6.To solve 5x − 4 = 2x + 8, Chloe's working is shown. Line 1: 5x − 4 = 2x + 8. Line 2: 3x − 4 = 8. Line 3: 3x = 4. Line 4: x = 4/3. Chloe has made a mistake in her working. Which line contains the mistake?
- 7.Solve 5x² − 15x = 0.
- 8.A sequence has the position-to-term rule n² + 2, where n is the position number. Work out the 6th term.
- 9.The line y = 3x + 6 meets the x-axis at one point. Work out the coordinates of that point.y = 3x + 6
- 10.A rope of length L metres is cut into 6 equal pieces, and 4 metres is then removed from one piece. Write an expression, in metres, for the length of that piece after the cut.
- 11.A triangle has vertices at (1, 1), (1, 5) and (6, 1). Work out the area of the triangle.
- 12.A quadratic graph has equation y = (x − 4)². A student says this graph crosses the x-axis at two different points. Explain why the student is wrong.
- 13.A Fibonacci-type sequence is defined by aₙ = aₙ₋₁ + aₙ₋₂ for n ≥ 3. Given that a₁ = 5 and a₃ = 17, work out a₂.
- 14.f(x) = 2x − 1. Work out ff(x).y = 2x − 1
- 15.A geometric sequence has first term 4 and common ratio √2. Work out the sum of the first three terms of the sequence, giving your answer in the form a + b√2.
Answer key
- (b) −0.5 — Method: gradient = change in height ÷ horizontal distance, and the height decreases so the change is negative. Working: change in height = 5 − 25 = −20, horizontal distance = 40, so gradient = −20 ÷ 40 = −0.5. Answer: the gradient is −0.5. 0.5 comes from dropping the negative sign, ignoring that the zip-line descends. 2 comes from inverting the gradient, dividing the horizontal distance by the drop in height instead of the other way round. −0.8 comes from dividing the drop by the platform height, 25, instead of by the horizontal distance, 40.
- (a) 12 km/h — Method: convert 15 minutes to hours: 15 ÷ 60 = 0.25 h. Speed = distance ÷ time = 3 ÷ 0.25 = 12 km/h. Distractor origins: 9 km/h is the speed for the second section (3 km in 20 minutes) instead of the first; 8 km/h is the average speed for the whole journey (6 km in 45 minutes) instead of just the first section; 0.2 km/h divides 3 km by 15 without converting the minutes into hours.
- (c) 22 m — Rearranging P = 2l + 2w for l gives l = (P − 2w)/2. Substituting P = 60 and w = 8: l = (60 − 16)/2 = 44/2 = 22 m. Answering 30 m comes from ignoring the width altogether and working out l = P/2, which only holds when w = 0. Answering 38 m comes from adding 2w instead of subtracting it: (60 + 16)/2 = 38. Answering 11 m comes from dividing by 4 instead of 2, as if the formula were P = 4l + 4w. The pen's length is 22 m.
- (b) x = 5 — Area = length × width, so x(x + 3) = 40, which rearranges to x² + 3x − 40 = 0. This factorises as (x + 8)(x − 5) = 0: the two numbers in the brackets must multiply to −40 and add to +3, and the pair 8 and −5 does both. This gives x = −8 or x = 5. Since x is a length, it cannot be negative, so x = 5. A candidate who gives both solutions without rejecting the negative one, which cannot be a length, answers x = 5 or x = −8. A candidate who picks the wrong factor pair of 40, such as 10 and −4 instead of 8 and −5, gets (x + 10)(x − 4) = 0 and answers x = 4. A candidate who rejects the wrong root, keeping the negative solution instead of the positive one, answers x = −8.
- (a) 11 — 2n − 7 = 15, so adding 7 to both sides gives 2n = 22, and dividing by 2 gives n = 11. A candidate who makes a sign error and forms the equation 2n + 7 = 15 gets 2n = 8 and n = 4. A candidate who correctly adds 7 to get 2n = 22 but forgets to divide by 2 gets n = 22. A candidate who ignores the −7 altogether and solves 2n = 15 gets n = 7.5.
- (d) Line 3 — Method: check each line of Chloe's working against the correct algebraic step. Working: Line 1 to Line 2 is correct, subtracting 2x from both sides gives 3x − 4 = 8. But Line 2 to Line 3 should add 4 to both sides, giving 3x = 12, not 3x = 4 — the constant −4 has been dropped rather than removed correctly. Line 4 follows correctly from Chloe's own, incorrect, Line 3. Answer: Line 3. Line 1 is simply the original equation, copied out correctly. Line 2 correctly subtracts 2x from both sides of Line 1. Line 4 divides Chloe's own Line 3 by 3 correctly — the arithmetic there is fine, the mistake happened one line earlier.
- (c) x = 0 or x = 3 — Method: take out the common factor 5x: 5x(x − 3) = 0, so 5x = 0 or x − 3 = 0, giving x = 0 or x = 3. Distractor origins: x = 0 or x = 15 comes from forgetting to divide the second term by the common factor 5x correctly, leaving 15 instead of 3; x = 3 loses the solution x = 0 by dividing both sides by x; x = 5 or x = 3 mistakes the coefficient 5 itself for one of the solutions.
- (a) 38 — Method: substitute the position number into the rule and follow the order of operations, so the squaring is carried out before the 2 is added. Working: n = 6 gives 6² + 2; 6² means 6 × 6 = 36, and then 2 is added to 36. Answer: 38. The distractors: 14 comes from multiplying the position by 2 instead of squaring it, 6 × 2 + 2; 36 comes from squaring correctly and then forgetting to add the 2; 64 comes from adding the 2 first and squaring afterwards, (6 + 2)².
- (b) (−2, 0) — Method: a graph meets the x-axis where the y-value is 0, so setting y = 0 turns the equation into a linear equation in x. Working: 0 = 3x + 6 gives 3x = −6, so x = (−6) ÷ 3 = −2 and the meeting point is (−2, 0). Answer: (−2, 0). The distractors: (2, 0) comes from solving 3x = −6 and then dropping the minus sign from the result; (0, 6) is the y-axis crossing, found by substituting x = 0 instead of y = 0; (6, 0) comes from reading the constant 6 straight off as the x-coordinate, without dividing by 3 and without changing its sign.
- (d) L/6 − 4 — Method: find the length of one equal piece first (divide by 6), then apply the later change (subtract 4) to that piece. Working: one piece is L/6 metres; removing 4 metres from it gives L/6 − 4. Answer: L/6 − 4. L/6 + 4 comes from adding the 4 metres instead of removing it. (L − 4)/6 comes from removing the 4 metres from the whole rope before cutting it into pieces, the wrong order. 4 − L/6 comes from subtracting the piece length from 4 instead of the other way round.
- (d) 10 — The right angle is at (1, 1). The vertical side has length 5 − 1 = 4 and the horizontal side has length 6 − 1 = 5, so the area is (4 × 5) ÷ 2 = 20 ÷ 2 = 10. A candidate who forgets to halve the product of the two sides gets 4 × 5 = 20. A candidate who forgets to subtract the shared vertex's coordinate and uses the raw coordinates 6 and 5 as the side lengths gets (6 × 5) ÷ 2 = 30 ÷ 2 = 15. A candidate who uses only one side length as the area gets 5.
- (a) It touches the x-axis once, only at x = 4. — (x − 4)² is a square, so it equals zero only when x − 4 = 0, that is at x = 4 — the curve just touches the x-axis there rather than crossing it, since a square cannot be negative on either side to cross through. Saying it crosses at x = 4 and x = −4 wrongly introduces a plus-or-minus, as if taking a square root of x, rather than recognising the bracket is already squared and only zero once. Saying it never touches the x-axis forgets that a squared term CAN equal zero, even though it can never be negative. Saying it crosses at x = 2 and x = −2 confuses (x − 4)² with the different expression x² − 4.
- (d) 12 — Since a₃ = a₂ + a₁, rearranging gives a₂ = a₃ − a₁ = 17 − 5 = 12. 22 comes from adding instead of subtracting: a₃ + a₁ = 17 + 5 = 22. 11 comes from treating the sequence as if it were arithmetic and averaging the two given terms: (5 + 17) ÷ 2 = 11 — but a Fibonacci-type sequence isn't arithmetic, so this doesn't apply. −12 comes from subtracting in the wrong order: a₁ − a₃ = 5 − 17 = −12.
- (c) 4x − 3 — ff(x) means f(f(x)): substitute f(x) into f in place of x. f(f(x)) = 2 × f(x) − 1 = 2 × (2x − 1) − 1. Expanding the bracket: 2 × (2x − 1) = 4x − 2. Combining the constant terms: −2 − 1 = −3, so f(f(x)) = 4x − 3. Writing 4x − 2 comes from expanding 2(2x − 1) correctly to get 4x − 2, then forgetting to subtract the outer 1 at all. Writing 4x² − 4x + 1 comes from reading ff(x) as f(x) multiplied by itself, (2x − 1)(2x − 1) = 4x² − 4x + 1, instead of substituting f(x) into f. Writing 4x − 1 comes from doubling the coefficient of x in the original rule directly, without actually substituting f(x) into f at all.
- (a) 12 + 4√2 — a₁ = 4, a₂ = 4√2, and a₃ = a₁ × r² = 4 × (√2)² = 4 × 2 = 8. The sum of the first three terms is 4 + 4√2 + 8 = 12 + 4√2. 8 + 4√2 comes from leaving out a₁ and adding only a₂ + a₃ = 4√2 + 8. 36 + 4√2 comes from squaring the whole second term instead of applying the ratio to the first term: (4√2)² = 32 used as a₃, giving 4 + 4√2 + 32 = 36 + 4√2. 4 + 12√2 comes from using r³ instead of r² for the third term: 4 × (√2)³ = 4 × 2√2 = 8√2, giving 4 + 4√2 + 8√2 = 4 + 12√2.
Build your own mix at the worksheet builder.