Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.The point (3, 6) lies on the circle x² + y² = 45. The tangent to the circle at (3, 6) crosses the x-axis at the point P. Work out the coordinates of P.
- 2.By completing the square, find the turning point of the curve y = x² − 4x + 9.y = x² − 4x + 9
- 3.Solve the simultaneous equations 2x + y = 7 and x + 2y = 8.
- 4.Tom buys 2 notebooks and 6 pencils on Monday, priced at p pence each for a notebook and q pence each for a pencil. On Tuesday he buys 3 more notebooks and 1 more pencil. Write a simplified expression, in pence, for the total amount Tom has spent on notebooks and pencils.
- 5.The height, h metres, of a ball t seconds after a stopwatch is started follows h = (t − 1)(5 − t) for 1 ≤ t ≤ 5, where h = 0 means the ball is at ground level. Work out the two times at which the ball is at ground level.
- 6.Which of these is a factor of 15x + 20?
- 7.The solution set of an inequality is described as: x is less than −3, or x is greater than or equal to 1. Write this solution set using set notation.
- 8.The perimeter of a rectangle is given by the formula P = 2(l + w), where l is the length and w is the width. A rectangular garden has a perimeter of 46 m and a length of 14 m. Rearrange the formula to make w the subject, then work out the width of the garden.
- 9.The nth term of a sequence is 2n² + 1. Work out the 4th term of the sequence.
- 10.The graph of y = f(x) has a minimum turning point at (2, −3). The graph of y = −f(x) + a has a maximum turning point at (2, 9). Work out the value of a.
- 11.Solve the inequality 2(3x − 1) ≥ 4x + 8.
- 12.Factorise 6x² − 7x − 3.
- 13.The trapezium rule is used to estimate the area under a curve between x = 2 and x = 6. The curve is concave up (it curves upwards, like the inside of a bowl) throughout this interval. Which statement about the estimate is correct?
- 14.Solve the inequality 4x + 1 > 2x + 9.
- 15.Make x the subject of the formula y = 4(x − 6).
Answer key
- (a) (15, 0) — Method: the tangent is perpendicular to the radius at the point of contact, so find the gradient of the radius, take its negative reciprocal, write the equation of the tangent, then substitute y = 0 because every point on the x-axis has y-coordinate 0. Working: the radius from (0, 0) to (3, 6) has gradient 6 ÷ 3 = 2, so the tangent has gradient −1/2. Substituting into y − 6 = −1/2(x − 3) gives y = −0.5x + 7.5. Setting y = 0 gives 0.5x = 7.5, so x = 15 and P is (15, 0). Answer: (15, 0). The distractors: (0, 7.5) is where the same tangent crosses the y-axis, reached by setting x = 0 instead of y = 0; (0, 0) comes from using the gradient of the radius, 2, for the tangent, which gives the line y = 2x through the centre and so crosses the x-axis at the origin; (6, 0) comes from changing the sign of the radius gradient without turning it upside down, which gives y = −2x + 12.
- (c) x = 2, y = 5 — x² − 4x + 9 = (x − 2)² − 2² + 9 = (x − 2)² + 5. Substituting x = 2: 2² = 4, 4 × 2 = 8, so 4 − 8 + 9 = 5, confirming the minimum value 5 at x = 2: turning point (2, 5). Using −4 instead of half of it inside the bracket gives (x − 4)² − 7, turning point (4, −7) — wrong, because only half the coefficient of x belongs inside the bracket. Reading the bracket's sign directly as the turning point's x-coordinate gives (−2, 5) — wrong, because (x − 2)² is zero at x = 2, not x = −2. Computing 4 − 9 = −5 instead of 9 − 4 = 5 flips the sign of the constant, giving (2, −5) — wrong, since the completed square's constant must be evaluated as 9 minus 4, not 4 minus 9. Substitute the x-value back into the original equation whenever you are unsure of a sign.
- (c) x = 2, y = 3 — Method: no letter cancels straight away, so make one letter the subject of one equation and substitute that expression into the other. Working: 2x + y = 7 gives y = 7 − 2x, so x + 2y = 8 becomes x + 2(7 − 2x) = 8, that is x + 14 − 4x = 8, so −3x = −6 and x = 2; substituting back gives y = 7 − 4 = 3. Answer: x = 2, y = 3, which checks in 2 + 6 = 8. The distractors: x = 3, y = 2 comes from adding the equations to x + y = 5 and then subtracting them the wrong way round, writing x − y = 1 instead of x − y = −1; x = 2, y = 5 comes from substituting x = 2 into 2x + y = 7 as 2 + y = 7, dropping the coefficient; x = −2, y = 11 comes from dividing −3x = −6 as though two minus signs gave a negative answer.
- (a) 5p + 7q — Tom's total spend combines like terms: (2p + 6q) + (3p + q) = 5p + 7q, adding the notebook terms (2p + 3p = 5p) and the pencil terms (6q + q = 7q) separately. Answering 12pq adds every coefficient together (2 + 6 + 3 + 1 = 12) and multiplies the letters, combining unlike terms as though notebooks and pencils were the same item. Answering 5p + 6q correctly combines the notebook terms but forgets to add Tuesday's extra pencil to the 6q. Answering 2p + 7q correctly combines the pencil terms but forgets to add Tuesday's 3 extra notebooks to the 2p. The total amount Tom has spent is 5p + 7q pence.
- (c) t = 1 second and t = 5 seconds — The ball is at ground level when h = 0, which happens when either bracket is zero. t − 1 = 0 gives t = 1, and 5 − t = 0 gives t = 5. The option with t = −1 makes a sign error solving the first bracket. The option with t = −5 makes a sign error solving the second bracket, treating 5 − t = 0 as if it gave a negative solution. The option with t = 4 seconds is an arithmetic slip in solving 5 − t = 0.
- (a) 5 — A factor of the whole expression must divide every term exactly. 15x + 20 = 5(3x + 4), so 5 is a factor. Distractor origins: 3 divides 15x exactly but does not divide 20 exactly; 4 divides 20 exactly but does not divide 15x exactly; 10 also divides 20 exactly but does not divide 15x exactly, so it is a factor of only one term, not of the whole expression.
- (a) {x : x < −3} ∪ {x : x ≥ 1} — "Less than −3" stays strict, since the wording never says "or equal to": x < −3. "Greater than or equal to 1" is inclusive: x ≥ 1. These are two separate, non-overlapping ranges joined with "or", so in set notation they are combined with the union symbol: {x : x < −3} ∪ {x : x ≥ 1}. Distractor routes: {x : x ≤ −3} ∪ {x : x > 1} swaps the strict and inclusive signs, marking −3 as included and 1 as excluded, the opposite of the wording. {x : −3 < x ≤ 1} treats "or" as "and", joining the two conditions into one continuous interval between the values instead of a union of two separate ranges. {x : x > −3} ∪ {x : x ≤ 1} reverses both inequality directions; the two reversed ranges then overlap and between them cover every number on the number line, so that set is the whole of the real line rather than the two separate ranges the description asks for.
- (a) 9 m — Undo the multiplication by the bracket first: dividing both sides by 2 gives P/2 = l + w. Subtracting the length from both sides gives w = P/2 − l. Substituting the measurements, 46 ÷ 2 = 23, and 23 − 14 = 9, so the width is 9 m. Taking the length off before halving gives (46 − 14) ÷ 2 = 16, which halves the length as well; expanding to P = 2l + 2w and then forgetting to divide by 2 gives 46 − 28 = 18; subtracting the length in the wrong direction gives 23 + 14 = 37.
- (a) 33 — Substitute n=4 into 2n²+1: 2×4²+1=2×16+1=33. A candidate who computes n² as 2×n instead of n×n would compute 2×(2×4)+1=2×8+1=17. A candidate who correctly finds 2×16 but forgets to add the constant 1 would stop at 32. A candidate who squares the whole term 2n, rather than squaring n before multiplying by 2, would compute (2×4)²+1=64+1=65.
- (b) 6 — Reflecting y = f(x) in the x-axis turns the minimum point (2, −3) into a maximum point at (2, 3), since −f(x) negates every y-value: −(−3) = 3. Adding a then gives 3 + a = 9, so a = 9 − 3 = 6. Forgetting the reflection and using the original y-value of −3 gives −3 + a = 9, so a = 12 — this ignores that −f(x) changes the sign of the y-coordinate before a is added. Writing a = −12 comes from subtracting in the wrong order, working out 9 − (−3) as −3 − 9 instead. Writing a = −6 comes from taking the negative of the correct answer, as if the final value of a needed to be reflected too, on top of the turning point.
- (b) x ≥ 5 — Expand the bracket: 2(3x − 1) = 6x − 2, so the inequality is 6x − 2 ≥ 4x + 8. Subtract 4x from both sides and add 2 to both sides: 2x ≥ 10. Divide both sides by 2: x ≥ 5. A candidate who only multiplies the 3x by 2 and forgets to multiply the −1 gets 6x − 1 ≥ 4x + 8, leading to x ≥ 4.5. A candidate who adds 4x instead of subtracting it gets 10x ≥ 10, leading to x ≥ 1. A candidate who multiplies by 2 instead of dividing gets x ≥ 20.
- (b) (3x + 1)(2x − 3) — To factorise 6x² − 7x − 3, look for two numbers that multiply to 6 × (−3) = −18 and add to −7: these are −9 and 2. Splitting the middle term gives 6x² − 9x + 2x − 3, which groups to 3x(2x − 3) + 1(2x − 3) = (3x + 1)(2x − 3). Writing (3x − 1)(2x + 3) comes from using the pair 9 and −2 instead — the right product but the wrong signs, giving +7x instead of −7x. Writing (6x − 1)(x + 3) comes from picking the factor pair 18 and −1: it multiplies to −18 correctly, but it adds to 17, not −7, so checking only the product splits the middle term as 6x² + 18x − x − 3 and pairs the wrong factors of 6 and 3 together. Writing (x − 3)(6x + 1) comes from that same unchecked pair used the other way round, splitting the middle term as 6x² + x − 18x − 3.
- (a) Overestimates — trapezium edges lie above the curve. — For a concave-up curve, each chord connecting two points on the curve lies ABOVE the curve between those points, because the curve bends away from the chord underneath it. The trapezium rule uses these chords as the top edges of each trapezium, so the trapeziums cover a larger region than the true area under the curve — the estimate is an overestimate. Saying it underestimates because the edges lie below the curve gets the direction backwards: for a concave-up curve the edges lie above, not below. Saying it overestimates 'because more strips always increase it' gives the right verdict for the wrong reason — using MORE, narrower strips makes a trapezium estimate more accurate and brings it closer to the true area, it does not simply increase the total. Saying the estimate is exact ignores that straight edges cannot follow a curved line perfectly; there is always a gap between the chord and the curve on a bend, which is exactly what makes the rule an estimate rather than an exact calculation.
- (d) x > 4 — Method: collect the x terms on one side and the numbers on the other, then divide by the coefficient of x; dividing by a positive number leaves the sign as it is. Working: subtracting 2x from both sides of 4x + 1 > 2x + 9 gives 2x + 1 > 9; subtracting 1 from both sides gives 2x > 8; dividing both sides by 2 gives x > 4. Answer: x > 4. The distractors: x < 4 comes from turning the sign round while dividing by 2; x > 5 comes from adding the 1 to the 9 instead of subtracting it, giving 2x > 10; x < 5 comes from making both of those mistakes together.
- (c) x = (y + 24)/4 — Method: expand the bracket first, then undo the operations done to x in reverse order. Working: y = 4(x − 6) = 4x − 24, so y + 24 = 4x, so x = (y + 24)/4. Answer: x = (y + 24)/4. x = (y + 6)/4 comes from expanding the bracket incorrectly, treating 4(x − 6) as 4x − 6 instead of 4x − 24. x = 4y + 96 comes from multiplying by 4 instead of dividing by 4 to undo the multiplication, giving 4(y + 24) = 4y + 96. x = y/4 − 6 comes from dividing by 4 first without expanding the bracket, then subtracting 6 as if the bracket's operation still applied afterwards.
Build your own mix at the worksheet builder.