Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.The area under a speed-time graph between t = 0 and t = 6 seconds is estimated using three strips of equal width, using the speeds, in m/s, at t = 0, 2, 4 and 6: 0, 5, 9 and 12. Using the trapezium rule with these three trapezia, estimate the distance travelled.
- 2.The nth term of a sequence is 4n + 2. A term in the sequence has value 30. Work out its position, n, in the sequence.
- 3.Factorise fully 56x − 24
- 4.A square patio of side length n slabs is surrounded by a single border of square paving slabs of the same size. For a patio with side length n, the total number of slabs used for the patio and its border together is 9 when n = 1, 16 when n = 2, 25 when n = 3, and 36 when n = 4. Work out an expression, in terms of n, for the total number of slabs.
- 5.A circle has centre (0, 0) and equation x² + y² = 36. Work out the coordinates of the two points where the circle crosses the y-axis.
- 6.Write down the expression that means the same as (x + 7) ÷ 4.
- 7.The graph of y = sin x is transformed onto the graph of y = sin x + 1. Which statement correctly describes the transformation and the new range of the graph?y = sin(x)
- 8.Work out the integer values of x that satisfy x² − 2x − 8 ≤ 0.
- 9.Line L has equation y = 2x + 3. Work out the equation of the line perpendicular to L that passes through the point (4, 1), giving your answer in the form x + 2y = c.y = 2x + 3
- 10.Describe the single transformation that maps the graph of y = x² onto the graph of y = x² + 3.y = x²y = x² + 3
- 11.A quadratic graph has equation y = (x − 4)². A student says this graph crosses the x-axis at two different points. Explain why the student is wrong.
- 12.The graph of y = f(x) passes through the point (0, 4). Work out the y-coordinate of the point where the graph of y = −f(x) + 5 crosses the y-axis.
- 13.Write down the coefficient of xy in the expression 4x²y − 7xy + 2.
- 14.A circle has centre (0, 0) and equation x² + y² = 3721. The point (11, 60) lies on the circle. One of these is the gradient of the tangent to the circle at (11, 60). Work out which one.
- 15.A company's weekly profit, in £, is modelled by y = f(x), where x is the number of weeks since launch. The graph of y = f(x) has a maximum at (10, 45000). A rival company uses the same marketing strategy but starts trading 6 weeks later and has fixed costs £8000 higher every week, so its profit is modelled by y = f(x − 6) − 8000. In which week does the rival's maximum weekly profit occur, and what is it?
Answer key
- (d) 40 m — Each trapezium has width 2. Its area is width × the average of its two heights. Strip 1: average of 0 and 5 is 2.5, so area = 2 × 2.5 = 5. Strip 2: average of 5 and 9 is 7, so area = 2 × 7 = 14. Strip 3: average of 9 and 12 is 10.5, so area = 2 × 10.5 = 21. Total distance = 5 + 14 + 21 = 40 m. Leaving out the division by 2 in the averaging step doubles every strip, giving 80 m instead of 40 m. Using only the LEFT height of each strip as a rectangle, 0 × 2 + 5 × 2 + 9 × 2 = 28, or only the RIGHT height, 5 × 2 + 9 × 2 + 12 × 2 = 52, both ignore that the graph curves between the two ends of each strip — always average the two heights of a trapezium, never use just one of them.
- (c) 7 — To reverse the rule, subtract the constant then divide by the coefficient: 30−2=28, then 28÷4=7, so n=7. A candidate who adds the constant instead of subtracting it, a sign error when rearranging, would compute (30+2)÷4=32÷4=8. A candidate who subtracts the constant correctly but then forgets to divide by the coefficient would stop at 30−2=28. A candidate who treats 4n+2 as a single term 6n, adding the coefficient and constant together, would compute 30÷6=5.
- (d) 8(7x − 3) — Method: find the highest common factor of the two terms, write it in front of a bracket and divide each term by it. Working: 56 = 8 × 7 and 24 = 8 × 3, so the highest common factor is 8; dividing gives 56x ÷ 8 = 7x and 24 ÷ 8 = 3, and the subtraction sign stays between them. Answer: 8(7x − 3), which multiplies back out to 56x − 24. The distractors: 8(7x + 3) comes from dropping the minus sign of −24 while dividing; 8(56x − 3) comes from dividing only the number term by 8 and leaving 56x untouched inside the bracket; 8(7x − 16) comes from subtracting 8 from 24 instead of dividing 24 by 8.
- (a) n² + 4n + 4 — The whole patio-plus-border square has side length (n + 2), so the total is (n + 2)². Expanding this bracket correctly gives n² + 4n + 4, which matches 9, 16, 25, 36 for n = 1, 2, 3, 4. Expanding (n + 2)² by squaring each term separately, as if (a + b)² = a² + b², gives n² + 4, which is already wrong at n = 1 (it gives 5, not 9). Multiplying out (n + 2)(n + 2) as n² + 2n + 2n but forgetting the final 2 × 2 gives n² + 4n, which is 5 short at every value of n. Counting the patio twice — once as the n² inner square and again inside the (n + 2)² total — gives n² + (n² + 4n + 4) = 2n² + 4n + 4.
- (b) (0, 6) and (0, −6) — Method: every point on the y-axis has x-coordinate 0, so substitute x = 0 into the equation of the circle and solve for y, remembering that a square root has a negative value as well as a positive one. Working: putting x = 0 into x² + y² = 36 leaves y² = 36, so y = 6 or y = −6, and the two crossings are (0, 6) and (0, −6). Answer: (0, 6) and (0, −6). The distractors: (0, 36) and (0, −36) use 36 itself as the distance from the centre, which reads r² as r; (6, 0) and (−6, 0) are the right distance from the centre but are the crossings of the x-axis, found by setting y = 0 instead of x = 0; (0, 18) and (0, −18) halve 36, treating the right-hand side of the equation as a diameter.
- (c) (x + 7)/4 — Method: dividing an expression by a number is written as a fraction, with the whole expression on top. Working: (x + 7) ÷ 4 = (x + 7)/4. Answer: (x + 7)/4. 4/(x + 7) comes from writing the numbers the wrong way round, putting 4 on top. 4(x + 7) comes from reading ÷ as ×, multiplying instead of dividing. (x + 7) − 4 comes from reading ÷ as −, subtracting instead of dividing.
- (c) Translate +1 in y; new range 0 ≤ y ≤ 2 — Adding 1 to sin x translates the graph 1 unit in the positive y-direction, and every y-value on the range increases by 1: −1 + 1 = 0 and 1 + 1 = 2, giving a new range of 0 ≤ y ≤ 2. A translation in the x-direction would not add anything to the y-values, so 'Translate +1 in x; range unchanged' correctly leaves the range at −1 ≤ y ≤ 1 for that (wrong) transformation, but the transformation itself is not what y = sin x + 1 shows. 'Translate +1 in y; new range −2 ≤ y ≤ 0' correctly spots the translation but subtracts 1 from each bound instead of adding it. 'Reflect in the x-axis' mistakes the transformation for a reflection rather than a translation; reflecting sin x in the x-axis does leave the range at −1 ≤ y ≤ 1 unchanged in size, but that is not the transformation y = sin x + 1 actually applies.
- (b) −2, −1, 0, 1, 2, 3, 4 — Factorise x² − 2x − 8 = (x − 4)(x + 2), giving roots x = 4 and x = −2. Since the coefficient of x² is positive and the inequality is ≤ 0, the solution is the closed interval between the roots, −2 ≤ x ≤ 4, with the roots included because the inequality is not strict. The integers in this interval are −2, −1, 0, 1, 2, 3, 4. Distractor routes: −1, 0, 1, 2, 3 drops both endpoints, treating ≤ as if it were the strict inequality <. −2, −1, 0, 1, 2, 3, 4, 5 comes from mis-factorising as (x − 5)(x + 2), giving an upper root of 5 instead of 4. −3, −2, −1, 0, 1, 2, 3 comes from mis-factorising as (x − 4)(x + 3), giving a lower root of −3 instead of −2.
- (c) x + 2y = 6 — L has gradient 2, so the perpendicular gradient is −1/2. Substituting (4, 1) into y − 1 = −(1/2)(x − 4): y = −(1/2)x + 2 + 1 = −(1/2)x + 3, so 2y = −x + 6, giving x + 2y = 6. Distractor routes: x − 2y = 2 comes from using gradient +1/2 instead of −1/2, forgetting the negative sign the perpendicular rule needs. x + 2y = 9 comes from swapping the point's coordinates, substituting (1, 4) instead of (4, 1). x + 2y = −2 comes from a sign error distributing the negative gradient over the bracket, computing −(1/2)(x − 4) as −(1/2)x − 2 instead of −(1/2)x + 2.
- (a) A translation by vector (0, 3) — y = x² + 3 adds a constant outside the squaring, so it is a vertical translation of y = x² — every point moves the same distance parallel to the y-axis, with no change in x. The vector is (0, 3), matching the +3. A vector of (3, 0) confuses this with a horizontal shift; (0, −3) has the right axis but the wrong sign, since the graph moves up, not down; a stretch changes the shape of the curve, which adding a constant term never does.
- (a) It touches the x-axis once, only at x = 4. — (x − 4)² is a square, so it equals zero only when x − 4 = 0, that is at x = 4 — the curve just touches the x-axis there rather than crossing it, since a square cannot be negative on either side to cross through. Saying it crosses at x = 4 and x = −4 wrongly introduces a plus-or-minus, as if taking a square root of x, rather than recognising the bracket is already squared and only zero once. Saying it never touches the x-axis forgets that a squared term CAN equal zero, even though it can never be negative. Saying it crosses at x = 2 and x = −2 confuses (x − 4)² with the different expression x² − 4.
- (c) 1 — At x = 0, f(0) = 4. Applying the transformations in order — reflect in the x-axis first, then translate up by 5 — gives −f(0) + 5 = −4 + 5 = 1. Applying the translation but forgetting the reflection gives f(0) + 5 = 9. Applying the reflection to the whole expression, including the +5, gives −f(0) − 5 = −9. Applying the reflection but forgetting the translation gives −f(0) = −4.
- (a) −7 — The coefficient of xy is the number multiplying that exact term, including its sign: in 4x²y − 7xy + 2, the term in xy is −7xy, so the coefficient is −7. Answering 7 correctly picks out the number but drops the minus sign that belongs to it. Answering 4 picks the coefficient of the x²y term instead of the xy term — x²y and xy are different terms because their powers of x differ. Answering −5 combines −7 with the constant term +2, as though the coefficient of xy included the number with no letter attached to it. The coefficient of xy is −7.
- (d) −11/60 — The radius from the origin to (11, 60) has gradient 60/11. The tangent is perpendicular to this radius, so its gradient is the negative reciprocal: −1 ÷ (60/11) = −11/60. Choosing 60/11 uses the radius's gradient unchanged, without applying perpendicularity. Choosing −60/11 negates the radius's gradient but forgets to take its reciprocal. Choosing 11/60 takes the reciprocal correctly but keeps the gradient positive instead of negative.
- (c) Week 16, £37,000 — y = f(x − 6) − 8000 combines a horizontal translation of 6 units RIGHT (subtracting 6 inside the brackets) with a vertical translation of £8000 DOWN (subtracting 8000 outside). Applying both to the maximum (10, 45000): 10 + 6 = 16, so the new maximum is in week 16. And 45000 − 8000 = 37000, so the maximum weekly profit is £37,000.
Build your own mix at the worksheet builder.