Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.A van's value depreciates by 18% each year. After 2 years it is worth £5,379.20. Work out its value when it was new, correct to the nearest pound.
- 2.By completing the square, find the turning point of the curve y = x² + 8x − 3.y = x² + 8x − 3
- 3.A proof that (n + 3)² − (n − 3)² is always a multiple of a certain number begins: Line 1: (n + 3)² − (n − 3)² = (n² + 6n + 9) − (n² − 6n + 9). Which expression correctly completes Line 2?
- 4.The graph of P = 480 ÷ V shows how the pressure, P pascals, of a gas depends on its volume, V cm³, at constant temperature. Use the relationship to work out the volume when the pressure is 32 pascals, and then work out by how much the volume increases when the pressure drops to 24 pascals.
- 5.The graph of y = f(x) has a root (an x-intercept) at x = 5. Work out the x-coordinate of the corresponding root on the graph of y = f(x + 2).
- 6.A straight line has equation 4y = 12x + 20. Work out the gradient of the line.y = 12x + 20
- 7.a = 2 and b = 5. Work out the value of a²b.
- 8.Solve the simultaneous equations x + y = 1 and 2x + y = 5.
- 9.Work out the gradient of the straight line with equation 3y = 12 − 6x.
- 10.A proof that the product of two consecutive even numbers is always a multiple of 8 begins: Let the two consecutive even numbers be 2n and 2n + 2, so their product is 2n(2n + 2) = 4n(n + 1). Which line correctly completes the proof?
- 11.A student attempts to prove that the product of two consecutive integers is always even: (i) Let the two consecutive integers be n and n + 1. (ii) Since n(n + 1) is even, one of n and n + 1 must be an even number. (iii) Therefore, n(n + 1) is even. At which statement does the proof first assume the very fact it is trying to prove?
- 12.The function f(x) = x² for all real values of x has no inverse function, but g(x) = x² for x ≥ 0 does have one. Which statement correctly explains this?y = x²
- 13.The mass of a chemical sample decays by 15% every hour. It starts at 500 g. Work out the mass remaining after 3 hours, correct to 1 decimal place.
- 14.The nth term of a sequence is n² + 3. Work out the first term of the sequence that is greater than 50.
- 15.A circle has centre (0, 0) and equation x² + y² = 36. Work out the coordinates of the two points where the circle crosses the y-axis.
Answer key
- (c) £8,000 — The multiplier for one year is 1 − 0.18 = 0.82, so 0.82 × 0.82 = 0.6724. Original value = 5,379.20 ÷ 0.6724 = £8,000. Treating the total drop as simple depreciation (18% × 2 = 36% lost in total, so dividing by 0.64 instead of 0.6724) gives 5,379.20 ÷ 0.64 = £8,405 (nearest pound) — wrong, because the depreciation compounds year by year rather than adding up. Dividing by 0.82 only once, forgetting the second year entirely, gives 5,379.20 ÷ 0.82 = £6,560 — wrong, because two years of depreciation have passed, not one. Multiplying by 0.6724 instead of dividing by it — repeating the depreciation forward instead of reversing it — gives 5,379.20 × 0.6724 = £3,617 (nearest pound) — wrong, because to find the ORIGINAL value you must undo the depreciation, not apply it again.
- (d) x = −4, y = −19 — x² + 8x − 3 = (x + 4)² − 4² − 3 = (x + 4)² − 19. Substituting x = −4: (−4)² = 16, 8 × (−4) = −32, so 16 − 32 − 3 = −19, confirming the minimum value −19 at x = −4: turning point (−4, −19). Using 8 instead of half of it inside the bracket gives (x + 8)² − 67, turning point (−8, −67) — wrong, because only half the coefficient of x belongs inside the bracket. Reading the bracket's sign directly as the turning point's x-coordinate gives (4, −19) — wrong, because (x + 4)² is zero at x = −4, not x = 4. Computing 16 + 3 = 19 instead of −3 − 16 = −19 flips the sign of the constant, giving (−4, 19) — wrong, since the completed square's constant must be evaluated as −3 minus 16, not 16 plus 3. Check by substitution whenever the sign of a constant feels uncertain.
- (b) 12n — Distributing the minus sign across the second bracket gives n² + 6n + 9 − n² + 6n − 9, and the n² terms and the +9/−9 cancel, leaving 6n + 6n = 12n. Writing 18 comes from only negating the first term of the second bracket, n², and treating the −6n and +9 as unchanged, which gives n² + 6n + 9 − n² − 6n + 9 = 18. Writing 2n² + 18 comes from adding the two brackets instead of subtracting them, (n² + 6n + 9) + (n² − 6n + 9) = 2n² + 18. Writing 6n comes from correctly negating the bracket but then only counting one of the two 6n terms, missing that they add rather than cancel.
- (b) 5 cm³ — When P = 32, V = 480 ÷ 32 = 15 cm³. When P = 24, V = 480 ÷ 24 = 20 cm³. The increase in volume is 20 − 15 = 5 cm³. Giving only the second volume, 20 cm³, forgets to subtract the first volume. Giving only the first volume, 15 cm³, answers the wrong part of the question. Subtracting the two pressures instead of the two volumes, 32 − 24 = 8, mixes up which quantity the question asks for.
- (a) 3 — y = f(x + 2) is f(x) translated 2 units to the LEFT (inside the bracket, adding moves the graph in the negative x-direction). The root moves with the whole graph: 5 − 2 = 3. Moving right instead of left gives 7; assuming a bracket shift leaves the root unchanged gives 5; writing down the shift amount 2 itself skips the translation altogether.
- (b) 3 — Method: rearrange the equation into the form y = mx + c first, then read off the gradient. Working: dividing 4y = 12x + 20 by 4 gives y = 3x + 5, so the gradient is 3. The value 12 comes from reading the coefficient of x before dividing the equation by 4. The value 20 comes from using the constant term of the unsimplified equation instead of the gradient. The value 5 comes from finding the y-intercept, 20 / 4 = 5, and giving that instead of the gradient.
- (b) 20 — a²b means a² multiplied by b: a² = 2² = 4, and 4 × 5 = 20. Reading the expression as (ab)² instead of a²b gives (2 × 5)² = 100. Squaring b instead of a, 2 × 5² = 50, squares the wrong letter. Adding a² and b instead of multiplying them, 2² + 5 = 9, uses the wrong operation.
- (a) x = 4, y = −3 — Method: both equations contain +y with the same coefficient, so subtracting one equation from the other removes y. Working: (2x + y) − (x + y) = 5 − 1 gives x = 4; substituting x = 4 into x + y = 1 gives 4 + y = 1, so y = −3. Answer: x = 4, y = −3, which also satisfies 8 − 3 = 5. The distractors: x = 4, y = 5 comes from rearranging x + y = 1 as y = 1 + x; x = −2, y = 3 comes from eliminating x by doubling the first equation and then reading −y = 3 as y = 3; x = 6, y = −5 comes from adding the constants instead of subtracting them while eliminating y, taking x as 5 + 1.
- (c) −2 — Method: rearrange the equation into the form y = mx + c, then read off the gradient. Working: 3y = 12 − 6x, so dividing every term by 3 gives y = 4 − 2x, so the gradient is −2. Answer: the gradient is −2. 2 comes from dropping the negative sign after dividing by 3. 4 comes from using the y-intercept, 4, instead of the gradient. −6 comes from reading off the coefficient of x before dividing the whole equation by 3.
- (d) n and n + 1 are consecutive integers, so one of them must be even; this makes n(n + 1) even, so 4n(n + 1) is 4 × an even number, which is a multiple of 8. — The proof needs a reason why n(n + 1) is even, not just an assertion. n and n + 1 are consecutive integers, so exactly one of them is even; multiplying by that even number keeps n(n + 1) even, so 4n(n + 1) = 4 × (an even number), and 4 × an even number always has a further factor of 2 hidden inside it, making the whole product a multiple of 8. The option 'is a multiple of 4, and because n and n + 1 are consecutive integers, it must be a multiple of 8' asserts the multiple-of-8 conclusion directly from 'multiple of 4' and 'consecutive integers' without ever showing that n(n + 1) itself is even — the missing step is exactly what earns the mark. The option '4n is always a multiple of 4 ... which means it is a multiple of 8' mistakes 4n being a multiple of 4 for the whole product 4n(n + 1) being a multiple of 8; that extra factor of 2 only comes from n(n + 1) being even, not from 4n alone. The option that expands to 4n² + 4n and calls it 'clearly a multiple of 8' never checks for a factor of 2 beyond the 4 already there — the word 'clearly' is standing in for a missing argument.
- (c) Statement (ii) — Statement (ii) opens with 'Since n(n + 1) is even', treating the very fact the proof is meant to establish as if it were already known — that is circular reasoning, assuming the conclusion to help derive itself. Statement (i) only names the two consecutive integers as n and n + 1; it makes no claim about whether their product is even, so it introduces nothing circular. Statement (iii) states the conclusion, and would be a valid final step if statement (ii) had reached 'one of n and n + 1 is even' by a genuine argument, such as considering the cases where n is even or odd separately. Saying the proof assumes nothing circular is wrong, because statement (ii)'s opening clause is exactly that assumption.
- (d) g is one-to-one: f(3) = f(−3), removed by x ≥ 0 — A function has an inverse only if it is one-to-one: every output must come from exactly one input. f(3) = 9 and f(−3) = 9, so two different inputs give the same output, and there is no way to send 9 back to a single input — f is not one-to-one over all real x. Restricting the domain to x ≥ 0 removes one of the two inputs behind every such pair, so g is one-to-one and does have an inverse. 'g's outputs are positive; f's could be negative' is wrong because f(x) = x² also only gives outputs of 0 or more — the outputs of f and g are identical sets; it is the INPUTS that differ, not the outputs. 'Restricting any domain always creates an inverse' is wrong because a restriction only helps if it actually removes the repeated outputs: restricting f(x) = x² to x ≥ −3 still leaves f(1) = f(−1) = 1, so that restricted function is still not one-to-one and still has no inverse. 'Squares can never be reversed, under any conditions' is wrong because √9 = 3 does reverse 3² = 9 once you know the input was non-negative — a square root just cannot tell you WHICH of two inputs you started from unless the domain has already ruled one of them out.
- (c) 307.1 g — The multiplier for one hour is 1 − 0.15 = 0.85. After 3 hours the mass is 500 × 0.85³. Since 0.85 × 0.85 = 0.7225 and 0.85 × 0.7225 = 0.614125, the mass is 500 × 0.614125 = 307.0625 g, which rounds to 307.1 g. Stopping after only 2 hours instead of 3 gives 500 × 0.7225 = 361.25 g, which rounds to 361.3 g — wrong, because the question asks for 3 hours, not 2. Treating the decay as simple (15% × 3 = 45% lost in total, applied once) gives 500 × 0.55 = 275.0 g, which is wrong because the decay compounds hour by hour rather than adding up. Working out the AMOUNT LOST instead of the mass remaining gives 500 − 307.0625 = 192.9375 g, which rounds to 192.9 g — wrong, because the question asks what remains, not what has decayed away. Whenever a percentage decreases repeatedly, multiply by the same factor each period rather than adding the percentages together.
- (a) 52 — Test successive terms: n=6 gives 6²+3=39, which is not greater than 50. n=7 gives 7²+3=52, which is greater than 50, so the first term greater than 50 is 52. A candidate who stops at n=6, before checking whether 39 actually exceeds 50, would give 39. A candidate who solves n²>50 instead of n²+3>50, ignoring the +3 in the search, would find n=8 is the first value with n²>50 (since 7²=49) and compute 8²+3=67. A candidate who computes n² by doubling n instead of squaring it would compute 2×7+3=17.
- (b) (0, 6) and (0, −6) — Method: every point on the y-axis has x-coordinate 0, so substitute x = 0 into the equation of the circle and solve for y, remembering that a square root has a negative value as well as a positive one. Working: putting x = 0 into x² + y² = 36 leaves y² = 36, so y = 6 or y = −6, and the two crossings are (0, 6) and (0, −6). Answer: (0, 6) and (0, −6). The distractors: (0, 36) and (0, −36) use 36 itself as the distance from the centre, which reads r² as r; (6, 0) and (−6, 0) are the right distance from the centre but are the crossings of the x-axis, found by setting y = 0 instead of x = 0; (0, 18) and (0, −18) halve 36, treating the right-hand side of the equation as a diameter.
Build your own mix at the worksheet builder.