Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (d) 47 — To reach the 8th term from the 1st term, the difference of 6 is added 7 times (8 − 1 = 7): 5 + 7 × 6 = 47. A candidate who multiplies by the term number itself, rather than one less, would compute 5 + 8 × 6 = 53. A candidate who uses one step too few (6 instead of 7) would reach 5 + 6 × 6 = 41. A candidate who forgets to include the first term at all would compute just 8 × 6 = 48.
- (a) Positive x-direction, 90°; image is y = sin x. — Writing cos(x − 90°) as cos(x − a) with a = 90 shows this is a horizontal translation, y = f(x − a), which moves the graph 90° in the positive x-direction; the identity cos(x − 90°) = sin x confirms the image is y = sin x. Choosing the negative x-direction reverses the sign inside the bracket — subtracting inside the bracket always translates in the positive x-direction, not the negative one, so that statement is wrong on direction. Getting the direction right but conflating the subtraction inside the bracket with an extra reflection of the output flips the sign of the resulting graph, wrongly giving y = −sin x. Treating the subtraction as if it changed the output directly, rather than the input, wrongly calls this a vertical translation even while still correctly recalling that the image simplifies to y = sin x.
- (a) 38 — Method: substitute the position number into the rule and follow the order of operations, so the squaring is carried out before the 2 is added. Working: n = 6 gives 6² + 2; 6² means 6 × 6 = 36, and then 2 is added to 36. Answer: 38. The distractors: 14 comes from multiplying the position by 2 instead of squaring it, 6 × 2 + 2; 36 comes from squaring correctly and then forgetting to add the 2; 64 comes from adding the 2 first and squaring afterwards, (6 + 2)².
- (c) The cost, in pounds, for each extra gigabyte of data used — In C = 15 + 2g, the number multiplying g is the gradient, which gives the extra cost for each extra unit of g — here, £2 for each extra gigabyte. 'The fixed monthly fee, in pounds' describes the constant term 15, not the coefficient of g. 'The total number of gigabytes included in the plan' misreads the coefficient as a quantity of data rather than a cost per gigabyte. 'The cost … for each extra 2 gigabytes' doubles the unit the coefficient actually applies to — it is the cost for each single extra gigabyte.
- (b) 143 — fg(4) means f(g(4)): work out g(4) first, then substitute the result into f. g(4) = 3 × 4 = 12, then f(12) = 12² − 1 = 144 − 1 = 143. Working out gf(4) instead swaps the order: f(4) = 4² − 1 = 15, then g(15) = 3 × 15 = 45 — that is the wrong composition. Treating f(x) as x − 1 (forgetting to square the input) gives f(12) = 12 − 1 = 11. Applying g twice instead of applying g then f gives g(g(4)) = g(12) = 3 × 12 = 36, which mixes up which function should be applied second.
- (b) 1.6 m/s² — Acceleration is the change in velocity divided by the time taken: (11 − 3) ÷ 5 = 8 ÷ 5 = 1.6 m/s². Forgetting to subtract the initial velocity and dividing the final velocity by the time instead gives 11 ÷ 5 = 2.2 m/s². Inverting the fraction, dividing the time by the change in velocity, gives 5 ÷ 8 = 0.625 m/s². Finding the change in velocity, 8 m/s, but stopping without dividing by the time gives 8 m/s².
- (a) 7 — Multiply the input by 2: 6 × 2 = 12. Then subtract 5: 12 − 5 = 7. A candidate who does the operations in the wrong order, subtracting 5 first and then multiplying by 2, gets (6 − 5) × 2 = 2. A candidate who only carries out the multiplication and forgets to subtract gets 12. A candidate who adds 5 instead of subtracting gets 6 × 2 + 5 = 17.
- (d) Below y = x + 1, below x + y = 5, above y = 0 — For y ≤ x + 1, R lies on or below the line y = x + 1. For x + y ≤ 5 (that is, y ≤ 5 − x), R lies on or below that line too. For y ≥ 0, R lies on or above the x-axis. Combining all three: R is below y = x + 1, below x + y = 5, and above y = 0. Distractor routes: "Above y = x + 1" flips the first inequality, describing the wrong side of that line. "Above x + y = 5" flips the second inequality, describing the wrong side of that line. "Below y = 0" flips the third inequality, describing the wrong side of the x-axis.
- (d) t = 5 — The maximum height occurs halfway between the two times when the ball is at ground level: the midpoint of t = 1 and t = 9 is (1 + 9) ÷ 2 = 5, so the ball reaches its maximum height at t = 5 seconds. Getting t = 4 comes from halving the DIFFERENCE between the times, 9 − 1 = 8, then 8 ÷ 2 = 4, instead of finding their midpoint. Getting t = 8 uses that difference, 9 − 1 = 8, as if the gap between the two times were itself the time of the maximum. Getting t = 10 adds the two times, 1 + 9 = 10, but forgets to divide by 2.
- (b) £105 — The hourly charge is 25 × 3 = £75. Adding the call-out fee: £75 + £30 = £105. A candidate who forgets the call-out fee gives just the hourly charge, £75. A candidate who adds the call-out fee to the hourly rate before multiplying by the hours, (30 + 25) × 3, gets £165. A candidate who multiplies the call-out fee by the number of hours instead of the hourly rate, 30 × 3, gets £90.
- (a) x = −1.8 and x = 2.8 — Method: the solutions of x² − x − 2 = 3 are the x-coordinates of the points where the curve y = x² − x − 2 meets the line y = 3, read off the grid to 1 decimal place. Working: the curve meets the line y = 3 at approximately x = −1.8 and at x = 2.8. Answer: x ≈ −1.8 and x ≈ 2.8. Distractor refutation: x = −1.0 and x = 2.0 comes from reading where the curve crosses the x-axis (y = 0), solving x² − x − 2 = 0, instead of where it meets the line y = 3. x = −3.0 and x = 4.0 comes from taking the two ends of the drawn curve as the intersection points, instead of finding where it actually crosses the line y = 3. x = 1.8 and x = 2.8 comes from a sign slip on the left-hand intersection, reading it as positive instead of negative.
- (d) x = (y + 8) / 3 — Method: add 8 to both sides, then divide the whole side by 3. Working: y = 3x − 8, so adding 8 to both sides gives y + 8 = 3x, then dividing both sides by 3 gives x = (y + 8) / 3. The value x = y + 8 / 3 is Priya's version, which comes from dividing only the 8 by 3 instead of dividing the whole expression y + 8 by 3. The value x = (y − 8) / 3 comes from a sign error, keeping −8 instead of moving it to +8. The value x = 3(y + 8) comes from multiplying by 3 instead of dividing.
- (b) 12n — Distributing the minus sign across the second bracket gives n² + 6n + 9 − n² + 6n − 9, and the n² terms and the +9/−9 cancel, leaving 6n + 6n = 12n. Writing 18 comes from only negating the first term of the second bracket, n², and treating the −6n and +9 as unchanged, which gives n² + 6n + 9 − n² − 6n + 9 = 18. Writing 2n² + 18 comes from adding the two brackets instead of subtracting them, (n² + 6n + 9) + (n² − 6n + 9) = 2n² + 18. Writing 6n comes from correctly negating the bracket but then only counting one of the two 6n terms, missing that they add rather than cancel.
- (b) 8 — The perimeter is 2(x + (x + 3)) = 4x + 6, so 4x + 6 = 38, which gives 4x = 32 and x = 8. A candidate who forgets the '+3' and treats the rectangle as a square, solving 2(2x) = 38, gets x = 9.5. A candidate who forgets to double the sum of the sides, solving 2x + 3 = 38, gets x = 17.5. A candidate who uses 3x instead of x + 3 for the length, solving 2(x + 3x) = 38, gets x = 4.75.
- (b) 20 — a²b means a² multiplied by b: a² = 2² = 4, and 4 × 5 = 20. Reading the expression as (ab)² instead of a²b gives (2 × 5)² = 100. Squaring b instead of a, 2 × 5² = 50, squares the wrong letter. Adding a² and b instead of multiplying them, 2² + 5 = 9, uses the wrong operation.
Build your own mix at the worksheet builder.