Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (a) 9 km — Ravi's house and the library have the same y-coordinate, so the distance between them is the difference between their x-coordinates: 6 − (−3) = 9 km. 3 km comes from dropping the negative sign on Ravi's x-coordinate and working out 6 − 3 instead. 0 km comes from using the y-coordinates, which are equal, instead of the x-coordinates. −9 km comes from working out −3 − 6 = −9 and not converting it to a positive distance.
- (c) 32 — The terms are 60, 53, 46, 39, 32 — each found by subtracting 7 from the term before, so the 5th term is 32. Subtracting 7 five times from the first term instead of four times, 60 − 7 × 5 = 25, treats the first term as if it came before the sequence starts. Adding 7 four times instead of subtracting, 60 + 7 × 4 = 88, uses the wrong operation. Stopping one term early gives the 4th term, 39.
- (d) −2 — y = f(x) − 6 is f(x) shifted down by 6, so every y-value on the graph decreases by 6. At x = 0, f(0) = 4, so the new y-value is 4 − 6 = −2. Adding 6 instead of subtracting gives 10; writing down the shift itself, −6, or leaving the original value 4 unchanged both skip the translation altogether.
- (b) No, because their gradients are 2 and −2 — Method: two lines are parallel exactly when their gradients are equal as signed numbers, so m is read from each equation written in the form y = mx + c and the two are compared. Working: y = 2x + 1 has gradient 2 and y = −2x + 3 has gradient −2; those are not equal, so the lines are not parallel, and indeed one slopes upwards while the other slopes downwards. Answer: No, because their gradients are 2 and −2. The distractors: saying yes because both gradients have size 2 comes from comparing the sizes of the gradients and ignoring their signs; saying yes because the gradients add to 0 comes from using a sum of zero as the test for parallel lines instead of equality of gradients; saying no because the y-intercepts are 1 and 3 reaches the right verdict by the wrong route, since the intercepts decide where the lines sit rather than whether they are parallel.
- (c) x ≥ 3 — Method: collect the number terms first; the x term is negative, so the final step multiplies both sides by −1, and that is the one step that turns the inequality sign round. Working: subtracting 5 from both sides of 5 − x ≤ 2 gives −x ≤ −3; multiplying both sides by −1 turns −x into x and −3 into 3, and because the multiplier is negative the ≤ becomes ≥, so x ≥ 3. Answer: x ≥ 3. The distractors: x ≤ 3 comes from multiplying by −1 without turning the sign round, the commonest slip on this type; x ≤ −3 comes from reading −x ≤ −3 as though the minus sign could simply be rubbed off the left-hand side; x ≥ −3 comes from turning the sign round correctly but leaving the right-hand side at −3 instead of multiplying it by −1 as well.
- (a) 1 — a² − 2b = (−3)² − 2(4) = 9 − 8 = 1. A candidate who squares −3 but keeps the negative sign gets −9 − 8 = −17. A candidate who forgets to square a and substitutes it as −3 gets −3 − 8 = −11. A candidate who adds instead of subtracting 2b gets 9 + 8 = 17.
- (a) 18 cm² — Method: substitute the width into the formula, applying the index to the letter before multiplying by the 2 in front of it. Working: x² = 3 × 3 = 9, and then A = 2 × 9 = 18, so the area is 18 cm². Answer: 18 cm². The distractors: 36 cm² comes from multiplying 2 by 3 first and squaring afterwards, giving (2 × 3)²; 12 cm² comes from doubling instead of squaring, so that x² is replaced by 2x and the calculation becomes 2 × 2 × 3; 6 cm² comes from working out 2 × 3 and never applying the index at all.
- (d) x = (y + 3)/4 — Two operations have been applied to x: it has been multiplied by 4 and then 3 has been subtracted. Undo them in the opposite order. Adding 3 to both sides gives y + 3 = 4x. Dividing both sides by 4 then gives (y + 3)/4 = x, so x = (y + 3)/4. The bracket matters: writing y/4 + 3 divides only the y by 4 and leaves the 3 untouched. Writing (y − 3)/4 subtracts the 3 instead of adding it, and writing 4(y + 3) multiplies by 4 rather than dividing.
- (a) x = 2, x = 7; y-intercept cannot be found here — Translating y = f(x) to y = f(x − 3) shifts the graph 3 units to the right, so each root increases by 3: x = −1 becomes x = 2, and x = 4 becomes x = 7. The y-intercept is the value at x = 0, which for this new graph is f(0 − 3) = f(−3) — and f(−3) is not one of the values given, so the new y-intercept cannot be worked out from the information given. Writing 'y-intercept stays at (0, −8)' wrongly assumes a horizontal translation leaves the y-intercept unchanged — it generally does not, since it moves the whole graph sideways, including the point that used to sit on the y-axis. Writing roots at x = −4 and x = 1 comes from translating 3 units to the LEFT instead of to the right — f(x − 3) shifts the graph in the positive x-direction, not the negative direction.
- (b) (−2, 0) — Method: a graph meets the x-axis where the y-value is 0, so setting y = 0 turns the equation into a linear equation in x. Working: 0 = 3x + 6 gives 3x = −6, so x = (−6) ÷ 3 = −2 and the meeting point is (−2, 0). Answer: (−2, 0). The distractors: (2, 0) comes from solving 3x = −6 and then dropping the minus sign from the result; (0, 6) is the y-axis crossing, found by substituting x = 0 instead of y = 0; (6, 0) comes from reading the constant 6 straight off as the x-coordinate, without dividing by 3 and without changing its sign.
- (b) h = 2A/b — The height has been multiplied by the base and the result then divided by 2, so undo the division first. Multiplying both sides by 2 gives 2A = bh. Undoing the multiplication by the base comes next: dividing both sides by b gives 2A/b = h, so h = 2A/b. Dividing by 2 instead of multiplying gives A/(2b), a quarter of the correct height; multiplying by the base instead of dividing gives 2Ab; writing b/(2A) turns the final fraction upside down.
- (a) 8 — f(x − 1) means every input to f is reduced by 1 before it is looked up. At x = 2, the input to f becomes 2 − 1 = 1, so f(x − 1) at x = 2 is f(1) = 8. Reading f(2) = 4 directly from the table, without applying the shift, gives 4. Shifting in the wrong direction, using x + 1 = 3 instead of x − 1 = 1, gives f(3) = 1. Confusing f(x − 1) with f(x) − 1 — taking f(2) = 4 and then subtracting 1 — gives 3.
- (a) 4(x + 3) = 20 and 4x + 3 = 11 when x = 2, so the two expressions are not equivalent, because the bracket means the 3 must be added before multiplying by 4. — Substituting x = 2: 4(x + 3) = 4 × 5 = 20, and 4x + 3 = 8 + 3 = 11. The two values are different, and expanding 4(x + 3) algebraically gives 4x + 12, which can never equal 4x + 3 (that would require 12 = 3) — so the two expressions are never equivalent, for any value of x. The option claiming they become equal for a larger x is wrong: 4x + 12 = 4x + 3 has no solution at all. The option claiming they are equivalent because they share the terms 4x and 3 ignores that the bracket changes the constant term. The option that calculates 4(x + 3) as 11 ignores the bracket completely, applying the 4 only to the x term.
- (c) {x : x ≤ −4} ∪ {x : x ≥ 4} — Rearrange so one side is zero: x² − 16 ≥ 0, then factorise: (x − 4)(x + 4) ≥ 0. The critical values are x = −4 and x = 4. Since the coefficient of x² is positive, the graph is a U-shape that is on or above the x-axis outside its roots, so the solution is x ≤ −4 or x ≥ 4, written as {x : x ≤ −4} ∪ {x : x ≥ 4}. Distractor routes: {x : −4 ≤ x ≤ 4} takes the region BETWEEN the roots, which is where x² − 16 is negative, the opposite region. {x : x ≥ 4} keeps only the positive square root and drops the negative branch entirely. {x : x ≤ 4} comes from a sign error, treating the inequality as if it were x² ≤ 16.
- (d) n² + 3 — First differences: 3, 5, 7, 9. Second differences: 2, 2, 2, so the sequence is quadratic and the coefficient of n² is half the second difference: a = 2 ÷ 2 = 1. Subtracting n² (1, 4, 9, 16, 25) from the terms (4, 7, 12, 19, 28) leaves 3, 3, 3, 3, 3, a constant, so the nth term is n² + 3. Using the second difference itself as a, without halving it, gives 2n² + 3. Finding a = 1 correctly but then dropping the constant remainder gives n². Treating the first first difference (3) as a common difference and building a linear formula a + (n − 1)d = 4 + 3(n − 1) gives 3n + 1, which fits only the first term.
Build your own mix at the worksheet builder.