Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (a) y = (4/3)x + 25/3 — The radius from (0, 0) to (−4, 3) has gradient 3 ÷ (−4) = −3/4. The tangent is perpendicular to the radius, so its gradient is the negative reciprocal, 4/3. Using y − y₁ = m(x − x₁) with the point (−4, 3): y − 3 = (4/3)(x + 4), so y = (4/3)x + 16/3 + 3 = (4/3)x + 25/3. Using the radius's own gradient, −3/4, instead of taking the perpendicular gradient, gives y − 3 = (−3/4)(x + 4), which simplifies to y = −(3/4)x once the −3 and +3 in the constant cancel out. Taking the reciprocal of the radius's gradient but keeping the wrong sign, using −4/3 instead of 4/3, gives y = −(4/3)x − 7/3. Correctly finding the gradient 4/3 and expanding the bracket, but forgetting to add the y-coordinate 3 at the end, gives y = (4/3)x + 16/3.
- (b) An identity, since both sides are equal for every x. — Expanding the left-hand side: 5(2x−3)=10x−15, which is exactly the same as the right-hand side for every value of x, so it is an identity, not an equation that is only true for one particular x. A candidate who treats every equals-sign statement as an equation, without checking whether it holds for all values of x, would choose the equation option. A candidate who mistakes it for a formula is assuming it relates two different letters or quantities, but only x appears — there is no second variable such as area or cost — so it is not a formula. A candidate who mistakes it for an inequality is assuming the two sides are only equal for particular values of x, but expanding shows they are identical for every value, not just some.
- (a) x = 2, x = 7; y-intercept cannot be found here — Translating y = f(x) to y = f(x − 3) shifts the graph 3 units to the right, so each root increases by 3: x = −1 becomes x = 2, and x = 4 becomes x = 7. The y-intercept is the value at x = 0, which for this new graph is f(0 − 3) = f(−3) — and f(−3) is not one of the values given, so the new y-intercept cannot be worked out from the information given. Writing 'y-intercept stays at (0, −8)' wrongly assumes a horizontal translation leaves the y-intercept unchanged — it generally does not, since it moves the whole graph sideways, including the point that used to sit on the y-axis. Writing roots at x = −4 and x = 1 comes from translating 3 units to the LEFT instead of to the right — f(x − 3) shifts the graph in the positive x-direction, not the negative direction.
- (c) x ≥ 3 — Method: collect the number terms first; the x term is negative, so the final step multiplies both sides by −1, and that is the one step that turns the inequality sign round. Working: subtracting 5 from both sides of 5 − x ≤ 2 gives −x ≤ −3; multiplying both sides by −1 turns −x into x and −3 into 3, and because the multiplier is negative the ≤ becomes ≥, so x ≥ 3. Answer: x ≥ 3. The distractors: x ≤ 3 comes from multiplying by −1 without turning the sign round, the commonest slip on this type; x ≤ −3 comes from reading −x ≤ −3 as though the minus sign could simply be rubbed off the left-hand side; x ≥ −3 comes from turning the sign round correctly but leaving the right-hand side at −3 instead of multiplying it by −1 as well.
- (d) x³ + 6x² + 11x + 6 — (x + 1)(x + 2) = x² + 3x + 2. Multiplying by (x + 3): (x² + 3x + 2)(x + 3) = x³ + 3x² + 2x + 3x² + 9x + 6, which simplifies to x³ + 6x² + 11x + 6. Choosing x³ + 6x² + 6x + 6 has the right x² and constant terms but adds 1 + 2 + 3 = 6 for the x-coefficient instead of the correct sum of pairwise products 1×2 + 1×3 + 2×3 = 11. Choosing x³ + 5x² + 11x + 6 sums only two of the three constants (2 + 3 = 5) for the x² coefficient, leaving out the 1. Choosing x³ + 6x² + 11x + 5 adds the last two constants (2 + 3 = 5) instead of multiplying all three (1 × 2 × 3 = 6) for the constant term.
- (c) Translate +1 in y; new range 0 ≤ y ≤ 2 — Adding 1 to sin x translates the graph 1 unit in the positive y-direction, and every y-value on the range increases by 1: −1 + 1 = 0 and 1 + 1 = 2, giving a new range of 0 ≤ y ≤ 2. A translation in the x-direction would not add anything to the y-values, so 'Translate +1 in x; range unchanged' correctly leaves the range at −1 ≤ y ≤ 1 for that (wrong) transformation, but the transformation itself is not what y = sin x + 1 shows. 'Translate +1 in y; new range −2 ≤ y ≤ 0' correctly spots the translation but subtracts 1 from each bound instead of adding it. 'Reflect in the x-axis' mistakes the transformation for a reflection rather than a translation; reflecting sin x in the x-axis does leave the range at −1 ≤ y ≤ 1 unchanged in size, but that is not the transformation y = sin x + 1 actually applies.
- (d) 3x² + 4x − 7 — Method: the minus sign in front of the second bracket changes the sign of every term inside it; then collect like terms. Working: removing the brackets gives 5x² + 3x − 2 − 2x² + x − 5; the squared terms give 5x² − 2x² = 3x², the x terms give 3x + x = 4x, and the number terms give −2 − 5 = −7. Answer: 3x² + 4x − 7. The distractors: 7x² + 2x + 3 comes from adding the two brackets instead of subtracting, giving 5x² + 2x², 3x − x and −2 + 5; 3x² + 2x + 3 comes from applying the minus sign to 2x² only, leaving −x and +5 unchanged so that 3x − x = 2x and −2 + 5 = 3; 3x² + 4x + 3 comes from changing the signs of the terms with letters but leaving +5 as it stood, so the number terms give −2 + 5 = 3.
- (b) 235 litres — The flow rate at t = 10 is the gradient of the tangent: change in volume ÷ change in time = (190 − 130) ÷ (12 − 8) = 60 ÷ 4 = 15 litres per minute. Treating this rate as roughly constant for a short interval, the volume 5 minutes after t = 10 is estimated as 160 + 5 × 15 = 235 litres. Using the tangent's own point spacing — 2 minutes, from t = 10 to t = 12 — instead of the 5 minutes actually asked for gives 160 + 2 × 15 = 190, which is just the volume already given at one of the tangent's own points, not an answer to the question asked. Multiplying the gradient by the time WITHOUT adding the starting volume, 5 × 15 = 75, forgets that a rate estimates a CHANGE, which must be added to the starting volume, not given as the answer on its own. Subtracting instead of adding, 160 − 5 × 15 = 85, extrapolates backward in time rather than forward.
- (d) w ≤ 630 — 'No more than 630 kg' means the weight can be exactly 630 kg or anything less, so the correct inequality is w ≤ 630, using 'less than or equal to' to include the limit itself. Writing w < 630 excludes 630 kg itself, as though the limit could not be reached exactly. Writing w ≥ 630 reverses the direction, describing a minimum weight rather than a maximum. Writing w > 630 both reverses the direction and excludes the boundary value. The inequality describing the lift's weight limit is w ≤ 630.
- (c) P — Sequence P has a common ratio of 2 (4 × 2 = 8, 8 × 2 = 16, 16 × 2 = 32), so it is geometric. Sequence Q has a common difference of 4, which is arithmetic, not geometric — a candidate who confuses a constant difference with a constant ratio picks Q. Sequence R has increasing differences of 3, 5, 7, a quadratic sequence, not geometric — a candidate who assumes any fast-growing sequence must be geometric picks R. Sequence S is the square numbers from 2² onwards (2², 3², 4², 5²), which is also quadratic, not geometric — a candidate who thinks squaring always means geometric growth picks S.
- (d) x = 4 or x = −4 — Method: divide both sides by 2 to get x² = 16, then take the square root of both sides: x = 4 or x = −4. Distractor origins: x = 4 forgets the negative root; x = 8 comes from halving 16 instead of taking its square root; x = 16 stops at x² = 16 without ever taking the square root.
- (b) 12 — Method: substitute the total cost into the formula, then subtract the fixed cost and divide by the cost per person. Working: 92 = 6p + 20, so 6p = 92 − 20 = 72, p = 72 ÷ 6 = 12. Answer: 12 people. 15.33 comes from dividing the whole £92 by £6 without first subtracting the £20 fixed cost: 92 ÷ 6 ≈ 15.33. 4.3 comes from swapping the two amounts round, subtracting £6 and dividing by £20: (92 − 6) ÷ 20 = 4.3. 18.67 comes from adding the fixed cost instead of subtracting it: (92 + 20) ÷ 6 ≈ 18.67.
- (c) The cost, in pounds, for each extra gigabyte of data used — In C = 15 + 2g, the number multiplying g is the gradient, which gives the extra cost for each extra unit of g — here, £2 for each extra gigabyte. 'The fixed monthly fee, in pounds' describes the constant term 15, not the coefficient of g. 'The total number of gigabytes included in the plan' misreads the coefficient as a quantity of data rather than a cost per gigabyte. 'The cost … for each extra 2 gigabytes' doubles the unit the coefficient actually applies to — it is the cost for each single extra gigabyte.
- (c) −4 — f(2) = 7, and y = f(x) + a passing through (2, 3) means f(2) + a = 3, so 7 + a = 3, giving a = 3 − 7 = −4. Writing a = 4 comes from subtracting the wrong way round, 7 − 3 instead of 3 − 7. Writing a = 10 comes from adding the two y-values instead of subtracting one from the other. Writing a = 3 comes from taking the new y-coordinate as the value of a directly, without accounting for the original y-value of 7 at all.
- (a) £50 — Substituting x = 200 into y = 0.15x + 20 gives y = 0.15 × 200 + 20 = 30 + 20 = £50. A candidate who forgets to add the standing charge would get only 0.15 × 200 = £30. A candidate who misplaces the decimal point in the rate, using 1.5 instead of 0.15, would get 1.5 × 200 + 20 = £320. A candidate who swaps the roles of the rate and the number of units would work out 0.15 × 20 + 200 = £203.
Build your own mix at the worksheet builder.