Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (a) 9 km — Ravi's house and the library have the same y-coordinate, so the distance between them is the difference between their x-coordinates: 6 − (−3) = 9 km. 3 km comes from dropping the negative sign on Ravi's x-coordinate and working out 6 − 3 instead. 0 km comes from using the y-coordinates, which are equal, instead of the x-coordinates. −9 km comes from working out −3 − 6 = −9 and not converting it to a positive distance.
- (a) 12 + 4√2 — a₁ = 4, a₂ = 4√2, and a₃ = a₁ × r² = 4 × (√2)² = 4 × 2 = 8. The sum of the first three terms is 4 + 4√2 + 8 = 12 + 4√2. 8 + 4√2 comes from leaving out a₁ and adding only a₂ + a₃ = 4√2 + 8. 36 + 4√2 comes from squaring the whole second term instead of applying the ratio to the first term: (4√2)² = 32 used as a₃, giving 4 + 4√2 + 32 = 36 + 4√2. 4 + 12√2 comes from using r³ instead of r² for the third term: 4 × (√2)³ = 4 × 2√2 = 8√2, giving 4 + 4√2 + 8√2 = 4 + 12√2.
- (b) x = 3, y = 4 — −x² + 6x − 5 = −(x² − 6x) − 5 = −[(x − 3)² − 9] − 5 = −(x − 3)² + 9 − 5 = −(x − 3)² + 4. Because the coefficient of x² is negative, −(x − 3)² is at most zero, so this turning point is a maximum. Substituting x = 3 gives (x − 3)² = 0, so y = 4, confirming the maximum value 4 at x = 3: turning point (3, 4). Using 6 instead of half of 6 inside the bracket — forgetting to halve before completing the square — lands on turning point (6, 31), wrong, because only half the coefficient belongs inside the bracket. Reading the bracket's sign directly as the turning point's x-coordinate gives (−3, 4) — wrong, because (x − 3)² is zero at x = 3, not x = −3. Computing 5 − 9 = −4 instead of 9 − 5 = 4 flips the sign of the constant, giving (3, −4) — wrong, since the constant must be evaluated as 9 minus 5, not 5 minus 9. Whenever the leading coefficient is negative, the turning point is a maximum, not a minimum — check by substituting back into the original equation.
- (b) 25 — The tangent at (9, 12) is 9x + 12y = 225. Setting y = 0 (the x-axis): 9x = 225, so x = 25. Choosing 18.75 comes from swapping the coefficients in the tangent equation (using 12x + 9y = 225) before setting y = 0. Choosing 15 is where the circle itself meets the x-axis (from x² = 225), not where the tangent does. Choosing 9 is just the x-coordinate of the original point (9, 12), not the point P.
- (d) y = x² − 10x + 21 — A translation by the vector (3, 0) moves the graph 3 units in the positive x-direction, which means replacing every x in the equation with (x − 3). Substitute into x² − 4x: (x − 3)² − 4(x − 3). Expand (x − 3)² to x² − 6x + 9, and expand −4(x − 3) to −4x + 12. Collecting like terms, x² − 6x + 9 − 4x + 12 = x² − 10x + 21, so the image is y = x² − 10x + 21. Substituting (x + 3) instead of (x − 3) — translating in the wrong direction — gives y = x² + 2x − 3. Adding 3 straight onto the original equation, treating the translation as vertical instead of horizontal, gives y = x² − 4x + 3. Expanding (x − 3)² as x² − 3x + 9, using −3x instead of −6x for the middle term, and then combining with −4(x − 3) gives y = x² − 7x + 21.
- (c) y = 200 − 8x — Method: in a linear model the amount present at the start is the constant term and the steady rate of change is the gradient, which is negative because the amount is falling. Working: at x = 0 minutes there are 200 litres, so the constant term is 200; 8 litres are lost every minute, so after x minutes 8x litres have gone and the amount left is y = 200 − 8x. Answer: y = 200 − 8x. The distractors: y = 8x + 200 treats the draining as filling, so the butt would gain 8 litres a minute; y = 200x − 8 swaps the two numbers over, using the starting 200 litres as the rate per minute and the 8 litres per minute as the starting amount; y = −8x − 200 makes the starting amount negative as well as the rate, so the butt would begin 200 litres in deficit.
- (d) The cost increases by about £10 per extra item — Gradient = change in cost ÷ change in items = (800 − 400) ÷ (70 − 30) = 400 ÷ 40 = 10. The units of the gradient are £ per item, so the cost is increasing by about £10 for every extra item produced, near x = 50. Subtracting in the wrong order, (400 − 800) ÷ (70 − 30) = −10, gives the right size but the wrong sign — check which point comes first each time. Leaving out the division by 40 gives £400 per item; dividing the wrong way round, 40 ÷ 400 = 0.1, gives £0.10 per item.
- (c) 32 — Using the rule 3n + 4: the 3rd term is 3 × 3 + 4 = 13, and the 5th term is 3 × 5 + 4 = 19, so their sum is 13 + 19 = 32. Forgetting to add the 4 for the 3rd term, 3 × 3 = 9, and adding the correct 5th term, gives 9 + 19 = 28. Rounding the 19 up to 20 to make the addition easier and then forgetting to take the extra 1 back off, 13 + 20 = 33, gives 33. Using the rule 4n + 3 instead of 3n + 4 gives 4 × 3 + 3 = 15 and 4 × 5 + 3 = 23, summing to 38.
- (a) 12 km/h — Method: convert 15 minutes to hours: 15 ÷ 60 = 0.25 h. Speed = distance ÷ time = 3 ÷ 0.25 = 12 km/h. Distractor origins: 9 km/h is the speed for the second section (3 km in 20 minutes) instead of the first; 8 km/h is the average speed for the whole journey (6 km in 45 minutes) instead of just the first section; 0.2 km/h divides 3 km by 15 without converting the minutes into hours.
- (d) x + y = 7 — The midpoint of AB is (−1 + 5)/2, (2 + 8)/2, which is (2, 5). The gradient of AB is (8 − 2)/(5 − (−1)) = 6/6 = 1. The perpendicular bisector has gradient −1 and passes through (2, 5): y − 5 = −(x − 2), which rearranges to x + y = 7. Distractor routes: x − y = −3 uses the gradient of AB itself, 1, rather than its negative reciprocal, giving a line PARALLEL to AB through the midpoint instead of perpendicular to it. x + y = 12 comes from adding the y-coordinates, 2 + 8 = 10, but forgetting to divide by 2, using the midpoint (2, 10) instead of (2, 5). x + y = 4 comes from using A's x-coordinate, −1, directly instead of averaging it with B's, giving the point (−1, 5) instead of the true midpoint (2, 5).
- (b) 3 — Method: rearrange the equation into the form y = mx + c first, then read off the gradient. Working: dividing 4y = 12x + 20 by 4 gives y = 3x + 5, so the gradient is 3. The value 12 comes from reading the coefficient of x before dividing the equation by 4. The value 20 comes from using the constant term of the unsimplified equation instead of the gradient. The value 5 comes from finding the y-intercept, 20 / 4 = 5, and giving that instead of the gradient.
- (d) 680 m — First find how long the acceleration takes: acceleration = change in speed ÷ time, so 2.5 = 20 ÷ t, giving t = 20 ÷ 2.5 = 8 seconds. The distance during this phase is the area of a triangle with base 8 and height 20: 1/2 × 8 × 20 = 80 m. The distance during the constant-speed phase is 20 × 30 = 600 m, since distance = speed × time at a constant speed. The total distance is 80 + 600 = 680 m. Using the given 30 seconds for the acceleration phase as well, 1/2 × 30 × 20 = 300, plus the correct 600, gives 900 m — but 30 seconds is only stated for the constant-speed phase. Leaving out the 1/2 and using the full rectangle for the acceleration phase, 8 × 20 = 160, plus the correct 600, gives 760 m — the speed is not constant during acceleration, so this area is a triangle, not a rectangle. Swapping the two times round, and using 8 seconds for the constant-speed distance instead of 30, 20 × 8 = 160, plus the correct triangle area of 80, gives 240 m.
- (c) The object was stationary (not moving) — On a distance-time graph, the gradient at any point represents the speed at that point. A gradient of 0 means distance is not changing over time, so the object is stationary. A straight, sloped line (not flat) shows constant nonzero speed; a curve bending one way shows acceleration or deceleration; a flat section is not a maximum speed — it is no speed at all. Read the shape of the graph, not just how steep it looks.
- (c) y = 3x + 7 — Method: the gradient is the change in y divided by the change in x with both taken in the same order, and a point whose x-coordinate is 0 gives the constant straight away because it lies on the y-axis. Working: m = (7 − 1) ÷ (0 − (−2)) = 6 ÷ 2 = 3; the point (0, 7) lies on the y-axis, so c = 7 and the line is y = 3x + 7. Answer: y = 3x + 7. The distractors: y = −3x + 7 comes from taking the y-difference as 1 − 7 while taking the x-difference as 0 − (−2), so the two subtractions run in opposite orders; y = 3x + 1 comes from using the y-coordinate of (−2, 1) as the constant instead of the point that actually lies on the y-axis; y = (1/3)x + 7 comes from writing the gradient upside down as the change in x over the change in y, 2 ÷ 6.
- (c) 5 — Method: call the number of years ago t, take t off both ages, and form an equation from the comparison at that time. Working: t years ago the father was 40 − t and Ethan was 10 − t, so 40 − t = 7(10 − t); expanding gives 40 − t = 70 − 7t, adding 7t to both sides gives 40 + 6t = 70, subtracting 40 gives 6t = 30, and dividing by 6 gives t = 5. Checking: five years ago the father was 35 and Ethan was 5, and 35 = 7 × 5. Answer: 5. The distractors: 35 comes from finding the right moment but giving the father's age at that time instead of the number of years; 30 comes from using Ethan's present age on the right-hand side, 40 − t = 7 × 10, which gives t = −30 and is then written as 30; 24 comes from reaching 6t = 30 correctly and subtracting 6 instead of dividing by 6.
Build your own mix at the worksheet builder.