Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (a) x > 4 — Subtract 2x from both sides: 3x − 3 > 9. Add 3 to both sides: 3x > 12. Divide both sides by 3: x > 4. A candidate who subtracts 3 from 9 instead of adding gets 3x > 6, so x > 2. A candidate who divides correctly but wrongly flips the inequality (as if dividing by a negative) gets x < 4. A candidate who multiplies by 3 instead of dividing gets x > 36.
- (a) 4 — Rectangle 1: P = 2(9 + 4) = 2 × 13 = 26 cm. Rectangle 2: P = 2(6 + 5) = 2 × 11 = 22 cm. Difference = 26 − 22 = 4 cm. 2 comes from finding the difference between (l + w) for each rectangle, 13 − 11 = 2, but forgetting to double it. 26 comes from giving rectangle 1's whole perimeter instead of the difference between the two. 6 comes from doubling only the change in length, 2 × (9 − 6), and ignoring that the width also changed.
- (b) (−4, 3) — Method: in a rectangle whose sides are parallel to the axes only two different x-coordinates and two different y-coordinates appear, and each of them is shared by a pair of vertices, so the missing vertex takes the x-coordinate and the y-coordinate that so far appear only once. Working: the x-coordinates given are −4, 2 and 2, so 2 is already used twice and −4 is used once; the y-coordinates given are −1, −1 and 3, so −1 is already used twice and 3 is used once; the fourth vertex therefore has x = −4 and y = 3. Answer: (−4, 3). The distractors: (3, −4) comes from picking the two unpaired coordinates correctly and then writing them in the wrong order; (−4, −5) comes from matching the 4-unit vertical side but measuring it downwards from (−4, −1) instead of upwards; (8, 3) comes from carrying on round the shape with the horizontal step used earlier, adding 6 to the x-coordinate of (2, 3) instead of closing the rectangle.
- (b) y decreases towards zero but never reaches it — Method: as x gets larger, dividing 20 by a bigger number gives a smaller result, so y decreases; because 20/x can never be exactly zero for any positive x, the curve gets closer to zero without ever reaching it, so y decreases towards zero but never reaches it. Distractor origins: 'y increases towards a limit but never reaches it' has the relationship backwards, treating y as increasing when it is actually decreasing; 'y decreases at a steady rate and reaches zero' wrongly assumes the graph behaves like a straight line that eventually hits zero; 'y stays the same however large x becomes' wrongly assumes there is no change in y at all.
- (d) y = (1/4)x + 3 — The given line has gradient −4, so the perpendicular gradient is the negative reciprocal, 1/4. Since (0, 3) is the y-intercept, the perpendicular line is y = (1/4)x + 3. Distractor routes: y = −4x + 3 uses the original line's own gradient instead of the perpendicular gradient, only changing the intercept for the new point. y = (−1/4)x + 3 takes the reciprocal of −4 but forgets to change its sign, so it is not the true negative reciprocal. y = 4x + 3 negates the gradient −4 but does not take its reciprocal, giving 4 instead of 1/4.
- (a) It gets closer to zero but never actually reaches it. — y = 60 × (0.5)ˣ is always positive, however large x is, because a positive number raised to any power stays positive. As x increases, (0.5)ˣ gets smaller and smaller but never equals zero, so y approaches zero without ever reaching it. Believing the curve reaches zero when x = 60, because 60 is the starting value, mixes up the y-intercept with a stopping point — an exponential decay curve like this one never actually reaches the x-axis, so this is wrong. Believing the curve goes negative for large x is wrong because multiplying a positive number by (0.5) any number of times can never produce a negative result. Believing the curve levels off at y = 0.5, confusing the base of the exponential with its eventual level, is wrong: the base only controls how fast the curve falls, not where it settles — this curve settles at y = 0, not y = 0.5. Whenever you sketch an exponential decay curve, draw it approaching the x-axis but never touching it.
- (d) x = (y + 3)/4 — Two operations have been applied to x: it has been multiplied by 4 and then 3 has been subtracted. Undo them in the opposite order. Adding 3 to both sides gives y + 3 = 4x. Dividing both sides by 4 then gives (y + 3)/4 = x, so x = (y + 3)/4. The bracket matters: writing y/4 + 3 divides only the y by 4 and leaves the 3 untouched. Writing (y − 3)/4 subtracts the 3 instead of adding it, and writing 4(y + 3) multiplies by 4 rather than dividing.
- (c) 2 < x < 3 — Factorise x² − 5x + 6 = (x − 2)(x − 3), giving roots x = 2 and x = 3. Since the coefficient of x² is positive, the graph is a U-shape that dips below the x-axis between its roots. So x² − 5x + 6 < 0 for 2 < x < 3. Distractor routes: x < 2 or x > 3 takes the region OUTSIDE the roots, where the graph is above the x-axis, the opposite of what is wanted. 2 ≤ x ≤ 3 uses ≤ instead of the strict < the question asks for, wrongly including the roots themselves, where the expression equals zero, not less than zero. −3 < x < −2 comes from factorising as (x + 2)(x + 3), reversing the sign of both roots.
- (d) 48 — Each term is found by multiplying the previous term by the common ratio, 2: 3, 6, 12, 24, 48 — the 5th term is 48. A candidate who mistakes the common ratio for a common difference, and adds 2 four times, would reach 3+4×2=11. A candidate who works out the multiplier 2⁴=16 but forgets to multiply it by the first term would give 16. A candidate who multiplies one time too many (finding the 6th term instead of the 5th) would reach 3×2⁵=96.
- (b) 40 — The differences between consecutive terms are 3, 5, 7, 9, increasing by 2 each time, so the next difference is 11, giving 29 + 11 = 40. A candidate who reuses the last difference of 9 without increasing it gets 29 + 9 = 38. A candidate who increases the difference by only 1 instead of 2 gets 29 + 10 = 39. A candidate who reuses the first difference of 3 instead of the pattern gets 29 + 3 = 32.
- (a) 1 — Method: the value of y when x = 0 is where the line meets the y-axis, which is the constant c in y = mx + c, so the gradient is worked out from the two given points first and the constant follows by substituting one of them. Working: m = (16 − 7) ÷ (5 − 2) = 9 ÷ 3 = 3, so the line is y = 3x + c; substituting x = 2 and y = 7 gives 7 = 3 × 2 + c, so c = 7 − 6 = 1, and the value of y when x = 0 is that constant. Answer: 1. The distractors: 3 comes from stopping at the gradient and offering it as the intercept; 4 comes from stepping back from x = 2 to x = 0 by one unit of x instead of two, 7 − 3 = 4; −1 comes from working the constant out as mx − y, 3 × 2 − 7 = −1, instead of y − mx.
- (c) y = 3x + 1 — Method: a line of known gradient m has equation y = mx + c, and c is found by substituting the coordinates of a point known to lie on it. Working: the gradient is 3, so the line is y = 3x + c; substituting x = 1 and y = 4 gives 4 = 3 × 1 + c, so c = 4 − 3 = 1. Answer: y = 3x + 1. The distractors: y = 3x − 1 comes from working out the constant as mx − y, 3 − 4 = −1, instead of y − mx; y = x + 3 comes from swapping the two numbers over, putting the gradient 3 in the constant position and the x-coordinate 1 in front of x; y = 3x + 4 comes from using the y-coordinate 4 as the constant without substituting.
- (b) (−2, 0) — Method: a graph meets the x-axis where the y-value is 0, so setting y = 0 turns the equation into a linear equation in x. Working: 0 = 3x + 6 gives 3x = −6, so x = (−6) ÷ 3 = −2 and the meeting point is (−2, 0). Answer: (−2, 0). The distractors: (2, 0) comes from solving 3x = −6 and then dropping the minus sign from the result; (0, 6) is the y-axis crossing, found by substituting x = 0 instead of y = 0; (6, 0) comes from reading the constant 6 straight off as the x-coordinate, without dividing by 3 and without changing its sign.
- (d) n and n + 1 are consecutive integers, so one of them must be even; this makes n(n + 1) even, so 4n(n + 1) is 4 × an even number, which is a multiple of 8. — The proof needs a reason why n(n + 1) is even, not just an assertion. n and n + 1 are consecutive integers, so exactly one of them is even; multiplying by that even number keeps n(n + 1) even, so 4n(n + 1) = 4 × (an even number), and 4 × an even number always has a further factor of 2 hidden inside it, making the whole product a multiple of 8. The option 'is a multiple of 4, and because n and n + 1 are consecutive integers, it must be a multiple of 8' asserts the multiple-of-8 conclusion directly from 'multiple of 4' and 'consecutive integers' without ever showing that n(n + 1) itself is even — the missing step is exactly what earns the mark. The option '4n is always a multiple of 4 ... which means it is a multiple of 8' mistakes 4n being a multiple of 4 for the whole product 4n(n + 1) being a multiple of 8; that extra factor of 2 only comes from n(n + 1) being even, not from 4n alone. The option that expands to 4n² + 4n and calls it 'clearly a multiple of 8' never checks for a factor of 2 beyond the 4 already there — the word 'clearly' is standing in for a missing argument.
- (c) The object was stationary (not moving) — On a distance-time graph, the gradient at any point represents the speed at that point. A gradient of 0 means distance is not changing over time, so the object is stationary. A straight, sloped line (not flat) shows constant nonzero speed; a curve bending one way shows acceleration or deceleration; a flat section is not a maximum speed — it is no speed at all. Read the shape of the graph, not just how steep it looks.
Build your own mix at the worksheet builder.