Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (d) 4x + 5 — A minus sign directly before a bracket changes the sign of both terms inside it: 6x − (2x − 5) = 6x − 2x + 5 = 4x + 5. The option 4x − 5 comes from only changing the sign of the 2x term and not the −5, giving 6x − 2x − 5. The option 8x − 5 comes from adding 2x instead of subtracting it, as if the minus sign did not apply to the bracket, giving 6x + 2x − 5. The option 8x + 5 repeats that same addition mistake and also changes the sign of the −5 term.
- (d) Yes: the 8th term is 50 − 8 × 7 = −6, which is negative. — Method: find the 8th term by subtracting 8 a total of 7 times from the first term, since the 1st term itself needs 0 subtractions. Working: 8th term = 50 − 8 × 7 = 50 − 56 = −6, which is negative, so Priya is correct. Answer: Yes, the 8th term is 50 − 8 × 7 = −6, which is negative. The "50 − 8 × 6 = 2" option subtracts 8 only six times instead of seven, an off-by-one error in counting the steps. The "50 − 8 × 8 = −14" option subtracts 8 eight times instead of seven, the opposite off-by-one error. The claim that repeated subtraction "can never go negative" ignores that subtracting enough times from any starting value eventually gives a negative result.
- (a) 3y² — 'y squared, multiplied by 3' means the square is applied to y only, and the result is then multiplied by 3, written as 3y². Writing y³ mistakes the multiplication by 3 for an extra factor of y, adding to the power instead of using a coefficient. Writing (3y)² squares the whole of 3y, including the 3, which gives 9y² rather than 3y² — the square should apply to y alone. Writing 3 + y² adds the 3 instead of multiplying by it. The expression for 'y squared, multiplied by 3' is 3y².
- (c) 4 — x² + 12x + 40 = (x + 6)² − 6² + 40 = (x + 6)² + 4, so a = 6 and b = 4. Since (x + 6)² can never be negative, y = (x + 6)² + 4 is smallest when the bracket is zero, so the minimum value of y is 4. Giving 40 instead reads off the ORIGINAL constant term and ignores the completing-the-square step entirely — wrong, because 40 is the value of y when x = 0, not the minimum value. Giving −6 instead answers with the x-coordinate of the turning point (where the bracket is zero) rather than the minimum y-value itself — wrong, because the question asks for the minimum value of y, not the value of x that produces it. Giving 36 instead stops after squaring half the coefficient, 6² = 36, without combining it with the 40 already in the expression — wrong, because the minimum value is 40 minus 36, not 36 on its own.
- (c) Yes; x = (y + 5)/2 is right — Sam's method is correct throughout: adding 5 to both sides gives y + 5 = 2x, and dividing both sides by 2 gives x = (y + 5)/2, so Sam is right. The option giving x = (y − 5)/2 assumes 5 should be subtracted again, but 2x − 5 = y means 5 has already been subtracted, so it must be added back, not taken away a second time. The option giving x = y/2 + 5 divides only the y term by 2 and leaves the 5 unhalved, which is not a valid rearrangement. The option agreeing Sam is correct but changing step 2 to x = 2(y + 5) confuses '2x' with 'x divided by 2' — since x is multiplied by 2, the inverse is division, not multiplication. Sam's working, and his final formula x = (y + 5)/2, are both correct.
- (c) Only x = 5 satisfies 3x + 5 = 20, not every value of x. — 3x + 5 = 20 is only true when x = 5, since 3 × 5 + 5 = 20; for any other value of x the two sides are not equal, so it is an equation, not an identity. Saying it cannot be simplified confuses simplifying with the equation/identity distinction, which is about how many values of x make it true. Saying it has an = sign is not a valid test, since identities are also written with an = or ≡ sign. A number on the right-hand side does not decide it either — what matters is whether both sides match for every value of x, not the form of the right-hand side.
- (d) 9 — Method: expand the brackets fully first, then collect the x-terms and constants before dividing. Working: 4(x − 3) = 4x − 12, so 4x − 12 = 2x + 6; 4x − 2x = 6 + 12; 2x = 18; x = 9. Answer: x = 9. 4.5 comes from expanding only the x-term in the bracket and forgetting to multiply the 3, giving 4x − 3 = 2x + 6, then 2x = 9, x = 4.5. −3 comes from a sign error when expanding, giving 4x + 12 = 2x + 6, then 2x = −6, x = −3. 3 comes from a sign error collecting the x-terms, adding instead of subtracting: 4x + 2x = 6 + 12, so 6x = 18, x = 3.
- (b) 1215 — Method: generate the terms one at a time with the term-to-term rule and compare each with 1000 as you go, stopping at the first one that passes it. Working: the terms are 5, then 5 × 3 = 15, then 45, then 135, then 405, and 405 × 3 = 1215; 405 is still below 1000 while 1215 is above it. Answer: 1215. The distractors: 405 comes from stopping at the last term that is still below 1000 instead of giving the first one above it; 3645 comes from carrying on one term too far, past the first term that passes 1000; 2187 comes from using the multiplier 3 as the first term as well, generating 3, 9, 27, 81, 243, 729, 2187 instead of the sequence described.
- (b) xₙ₊₁ = (xₙ² + 3) ÷ 5 — Starting from x² = 5x − 3, add 3 to both sides: x² + 3 = 5x. Divide both sides by 5: x = (x² + 3) ÷ 5. Writing this as an iteration gives xₙ₊₁ = (xₙ² + 3) ÷ 5. xₙ₊₁ = (xₙ² − 3) ÷ 5 comes from a sign error when moving the −3 across the equals sign — it should become +3, not stay as −3. xₙ₊₁ = 5(xₙ² + 3) comes from multiplying by 5 instead of dividing by 5 when isolating x. xₙ₊₁ = (xₙ + 3) ÷ 5 comes from dropping the index on x², using xₙ instead of xₙ².
- (a) 25 — Gradient = change in y ÷ change in x = (100 − 0) ÷ (4 − 0) = 100 ÷ 4 = 25. Dividing time by distance instead of distance by time gives 0.04; multiplying the two values instead of dividing gives 400; stopping at the change in distance, 100, forgets to divide by the change in time.
- (c) x = 3, y = 1 — Method: the y terms are +y and −y, so adding the two equations removes y and leaves an equation in x alone. Working: adding 2x + y = 7 and x − y = 2 gives 3x = 9, so x = 3; substituting x = 3 into x − y = 2 gives 3 − y = 2, so y = 1. Answer: x = 3, y = 1, which also satisfies 2 × 3 + 1 = 7. The distractors: x = 1, y = 3 comes from finding the two values correctly and then writing them against the wrong letters; x = 3, y = 2 comes from substituting x = 3 into 2x + y = 7 as 2 + 3 + y = 7, adding the coefficient instead of multiplying by it; x = 3, y = −1 comes from substituting into x − y = 2 as though it read x + y = 2.
- (c) 6x(2x + 3) — The highest common factor of 12x² and 18x is 6x. Dividing each term by 6x gives 12x² ÷ 6x = 2x and 18x ÷ 6x = 3, so 12x² + 18x = 6x(2x + 3). A candidate who only takes out the number 6 (missing the x) gets 6(2x² + 3x), which is not fully factorised. A candidate who only takes out 2x (missing the extra factor of 3 in 6) gets 2x(6x + 9), also not fully factorised — the bracket still shares a common factor. A candidate who takes out 3x instead of the full 6x gets 3x(4x + 6), which again is not fully factorised since 4x + 6 shares a common factor of 2.
- (c) Week 16, £37,000 — y = f(x − 6) − 8000 combines a horizontal translation of 6 units RIGHT (subtracting 6 inside the brackets) with a vertical translation of £8000 DOWN (subtracting 8000 outside). Applying both to the maximum (10, 45000): 10 + 6 = 16, so the new maximum is in week 16. And 45000 − 8000 = 37000, so the maximum weekly profit is £37,000.
- (b) y ≥ 2, y ≤ x, x ≤ 6 — "On or above the line y = 2" means y ≥ 2. "On or below the line y = x" means y ≤ x. "On or to the left of the line x = 6" means x ≤ 6. Together these give y ≥ 2, y ≤ x, x ≤ 6. Distractor routes: y ≤ 2, y ≤ x, x ≤ 6 flips the first inequality, describing "on or below" y = 2 instead of "on or above". y ≥ 2, y ≥ x, x ≤ 6 flips the second, describing "on or above" y = x instead of "on or below". y ≥ 2, y ≤ x, x ≥ 6 flips the third, describing "on or to the right of" x = 6 instead of "on or to the left".
- (d) y = −f(x + 2) has a maximum turning point at (1, 5). — y = f(x + 2) translates the graph 2 units in the negative x-direction, so the turning point's x-coordinate moves from 3 to 1; reflecting in the x-axis then negates the y-coordinate, turning −5 into 5, and also turns a minimum into a maximum — giving a true maximum turning point at (1, 5). Translating the root at x = 1 in the wrong direction, adding 2 instead of subtracting it, gives x = 3, but the true image root is at 1 − 2 = −1, so that statement is false. Keeping the coordinates (1, 5) correct but forgetting that reflecting in the x-axis turns a minimum into a maximum gives a false "minimum turning point" statement. Getting the reflection's effect on the turning-point type right (a maximum) but translating the x-coordinate in the wrong direction, using 3 + 2 = 5 instead of 3 − 2 = 1, gives a false statement at (5, 5).
Build your own mix at the worksheet builder.