Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (c) {x : x ≤ −4} ∪ {x : x ≥ 4} — Rearrange so one side is zero: x² − 16 ≥ 0, then factorise: (x − 4)(x + 4) ≥ 0. The critical values are x = −4 and x = 4. Since the coefficient of x² is positive, the graph is a U-shape that is on or above the x-axis outside its roots, so the solution is x ≤ −4 or x ≥ 4, written as {x : x ≤ −4} ∪ {x : x ≥ 4}. Distractor routes: {x : −4 ≤ x ≤ 4} takes the region BETWEEN the roots, which is where x² − 16 is negative, the opposite region. {x : x ≥ 4} keeps only the positive square root and drops the negative branch entirely. {x : x ≤ 4} comes from a sign error, treating the inequality as if it were x² ≤ 16.
- (b) 8 — Method: a circle centred on the origin has equation x² + y² = r², where r is the radius, so the number on the right-hand side is the square of the radius and not the radius itself. Working: comparing x² + y² = 64 with x² + y² = r² gives r² = 64, so r = √64 = 8. Answer: the radius is 8. The distractors: 64 is r² read straight off the equation as though the right-hand side were the radius, which is the commonest error on this form; 32 comes from halving 64, treating the right-hand side as a diameter that has to be halved; 16 is the diameter, 2 × 8, quoted in place of the radius.
- (d) 2x² − 4x + 3 — fg(x) means f(g(x)): substitute g(x) into f in place of x. g(x) = x − 1, so fg(x) = f(x − 1) = 2(x − 1)² + 1. Expanding (x − 1)² = x² − 2x + 1, so fg(x) = 2(x² − 2x + 1) + 1 = 2x² − 4x + 2 + 1 = 2x² − 4x + 3. Writing 2x² comes from working out gf(x) instead — g(f(x)) = f(x) − 1 = (2x² + 1) − 1 = 2x², which applies the functions in the wrong order. Writing 2x² − 1 comes from expanding (x − 1)² as x² − 1, dropping the middle term, so f(x − 1) becomes 2(x² − 1) + 1 = 2x² − 2 + 1 = 2x² − 1. Writing 2x² − 4x + 2 comes from expanding correctly but forgetting the final + 1 from f, stopping at 2(x² − 2x + 1) = 2x² − 4x + 2.
- (d) 7n + 5 — Method: find the rate charged per extra chair, then find the fixed part of the cost that fits hiring 1 chair. Working: the cost rises by £7 for each extra chair (19 − 12 = 7, 26 − 19 = 7, 33 − 26 = 7), so the cost has the form 7n + c. Substituting n = 1: 7(1) + c = 12, so c = 5. Answer: the cost in pounds is 7n + 5. The value 7n comes from ignoring the fixed part of the charge entirely. The value 7n + 12 comes from using the cost of 1 chair as the fixed part directly, without subtracting the per-chair rate first. The value 12n + 7 comes from swapping the roles of the cost of hiring 1 chair, £12, and the rate per extra chair, £7 — using the total for one chair as the coefficient of n and the rate as the fixed part.
- (a) 3 and 7 — Method: one equation is linear and the other is not, so rearrange the linear equation and substitute it into the other to leave a single quadratic in one letter. Working: x + y = 10 gives y = 10 − x, so xy = 21 becomes x(10 − x) = 21, which rearranges to x² − 10x + 21 = 0; factorising gives (x − 3)(x − 7) = 0, so the two values are 3 and 7, and 3 + 7 = 10 with 3 × 7 = 21. Answer: 3 and 7. The distractors: 1 and 21 comes from using only the product and taking the first factor pair of 21; −3 and −7 comes from factorising as (x + 3)(x + 7), which reverses the sign of both values; 5 and 5 comes from using only the sum and splitting 10 into two equal parts.
- (b) −23 — Expand two of the three brackets first: (x + 5)(x − 2) = x² + 3x − 10. Then multiply this by the remaining bracket: (2x − 1)(x² + 3x − 10) = 2x³ + 6x² − 20x − x² − 3x + 10, which simplifies to 2x³ + 5x² − 23x + 10, so the coefficient of x is −23. Writing −13 comes from a sign slip in the first expansion, combining 5x − 2x as −5x − 2x = −7x instead of +3x, which carries through to a wrong final coefficient. Writing −20 comes from forgetting to distribute the −1 across every term of x² + 3x − 10, dropping the −1 × 3x = −3x contribution. Writing 10 comes from reading off the constant term of the expansion instead of the coefficient of x.
- (d) x² − 6x + 9 — Method: squaring a bracket means multiplying that bracket by itself, so expand (x − 3)(x − 3) term by term and then collect like terms. Working: x × x = x², x × (−3) = −3x, (−3) × x = −3x and (−3) × (−3) = 9, giving x² − 3x − 3x + 9, and the two middle terms collect to −6x. Answer: x² − 6x + 9. The distractors: x² − 3x + 9 comes from writing down only one of the two middle products instead of both; x² + 6x + 9 comes from treating (−3) × x as +3x, so the middle terms are added rather than subtracted; x² − 9 comes from treating the square as the difference of two squares (x − 3)(x + 3).
- (d) 12 m — Method: give the width a letter, write the length in terms of it and use length × width = area to form a quadratic. Working: with a width of x metres the length is x + 4, so x(x + 4) = 96, which rearranges to x² + 4x − 96 = 0; factorising gives (x + 12)(x − 8) = 0, and a width must be positive, so x = 8 and the length is 8 + 4 = 12. Answer: 12 m, and 12 × 8 = 96 as the area requires. The distractors: 8 m is the width rather than the length asked for; 16 m comes from taking the other root as 12 and adding 4 to it, ignoring that the root −12 cannot be a width; 24 m comes from dividing the area by the 4 in the question instead of forming an equation.
- (d) x = 3 — The table is symmetrical about the turning point: y = 0 at both x = 1 and x = 5, and the lowest value, y = −4, occurs exactly halfway between them, at x = 3. Choosing x = 5 picks one of the roots rather than the midpoint between them. Choosing x = 1 picks the other root for the same reason. Choosing x = 6 picks the x-value where y returns to its starting value of 5, which is not the turning point.
- (a) 55 − 5n — The number of chairs decreases by 5 in each row after the first, so the common difference is d=−5, and the first term is a=50. The nth term is a+(n−1)d = 50+(n−1)(−5) = 50−5n+5 = 55−5n. A candidate who uses the common difference as the constant term instead of correctly finding 55, giving the constant as −5 instead, would write −5n−5. A candidate who uses the first term, 50, as the coefficient of n instead of the common difference, would write 50n−5. A candidate who does not multiply the common difference by n at all, treating the nth term as n+d instead of dn+c, would write n−5.
- (b) the first and the third — Method: the sign of a product depends only on the signs of the two numbers multiplied: like signs give a positive product and unlike signs a negative one, so look for the quadrants in which both coordinates carry the same sign. Working: in the first quadrant x and y are both positive, and positive times positive is positive; in the third quadrant both are negative, and negative times negative is positive as well; in the second quadrant x is negative while y is positive, and in the fourth x is positive while y is negative, so each of those gives a negative product. Answer: the first and the third. The distractors: 'the second and the fourth' comes from applying the rule for a NEGATIVE product, unlike signs, to a positive one; 'the first and the second' comes from testing only the y-coordinate and keeping the quadrants where the height is positive; 'the first and the fourth' comes from testing only the x-coordinate in the same way.
- (d) 4 — Subtracting the second equation from the first: the y-terms cancel, and the x-terms combine as 3x − x = 2x; the right-hand sides give 14 − 6 = 8. This gives 2x = 8, so x = 4. A candidate who subtracts in the wrong order would get 2x = 6 − 14 = −8, so x = −4. A candidate who uses only the first equation, dividing 14 by 3 as if y were 0, would get x ≈ 4.67. A candidate who reports the value of y instead of x would get y = 6 − 4 = 2.
- (c) 1 — At x = 0, f(0) = 4. Applying the transformations in order — reflect in the x-axis first, then translate up by 5 — gives −f(0) + 5 = −4 + 5 = 1. Applying the translation but forgetting the reflection gives f(0) + 5 = 9. Applying the reflection to the whole expression, including the +5, gives −f(0) − 5 = −9. Applying the reflection but forgetting the translation gives −f(0) = −4.
- (a) 19 — Each time x increases by 1, y increases by 3 (4, 7, 10, 13 — a constant difference of 3). So at x = 4, y = 13 + 3 = 16, and at x = 5, y = 16 + 3 = 19. A candidate who stops one step early, giving the value for x = 4 instead of x = 5, answers 16. A candidate who overcounts and adds three steps of 3 instead of two from x = 3 gets 13 + 9 = 22. A candidate who mistakes the y-intercept (4) for the common difference and adds 4 twice from x = 3 gets 13 + 8 = 21.
- (a) 18 — Method: substitute the value, apply the index before the multiplication, and remember that a negative number multiplied by itself gives a positive result. Working: x² = (−3) × (−3) = 9, and then 2 × 9 = 18. Answer: 18. The distractors: −18 comes from squaring only the 3 and leaving the minus sign outside the index, giving 2 × (−9); 36 comes from multiplying 2 by −3 first and squaring afterwards, giving (−6)²; −12 comes from reading x² as 2x, so that the calculation becomes 2 × 2 × (−3).
Build your own mix at the worksheet builder.