Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (d) 30° and 150° — The first solution is x = 30°, since sin 30° = 0.5. The graph of y = sin x is symmetrical about x = 90° between 0° and 180°, so the second solution is 180° − 30° = 150°. Adding 180° to the first solution instead of subtracting it from 180° gives 30° and 210°, but sin 210° = −0.5, not 0.5. Reflecting the first solution about x = 90° by adding 30° to 90° instead of subtracting from 180° gives 30° and 120°, but sin 120° = √3/2, not 0.5. Misremembering the standard value and using sin 45° = 0.5 instead of sin 30° = 0.5 gives 45° and 135°, but sin 45° = √2/2, not 0.5.
- (d) £2000 — This is an arithmetic sequence with first term £500 and common difference £300. The 6th term is 500 + 5 × 300 = 2000. A candidate who uses 6 lots of the increase instead of 5 gets 500 + 6 × 300 = 2300. A candidate who forgets to add the first year's profit at all gets 5 × 300 = 1500. A candidate who miscounts the number of increases as 4 instead of 5 gets 500 + 4 × 300 = 1700.
- (a) 8 — Method: rate = height gained ÷ time taken. Working: height gained = 52 − 20 = 32 m, time taken = 4 minutes, so rate = 32 ÷ 4 = 8 metres per minute. Answer: the rate is 8 metres per minute. 32 comes from working out the height gained but forgetting to divide by the time taken. 13 comes from dividing the final height, 52, by the time taken instead of the height gained. 5 comes from dividing the starting height, 20, by the time taken instead of the height gained.
- (b) h = 2A/b — The height has been multiplied by the base and the result then divided by 2, so undo the division first. Multiplying both sides by 2 gives 2A = bh. Undoing the multiplication by the base comes next: dividing both sides by b gives 2A/b = h, so h = 2A/b. Dividing by 2 instead of multiplying gives A/(2b), a quarter of the correct height; multiplying by the base instead of dividing gives 2Ab; writing b/(2A) turns the final fraction upside down.
- (c) 1, 7, 13, 19 — Method: substitute n = 1, 2, 3, 4 into the rule 6n − 5 in turn. Working: n = 1: 6 − 5 = 1. n = 2: 12 − 5 = 7. n = 3: 18 − 5 = 13. n = 4: 24 − 5 = 19. Answer: 1, 7, 13, 19. 6, 12, 18, 24 comes from using 6n on its own, forgetting to subtract 5. 5, 11, 17, 23 comes from using the rule 6n − 1 instead of 6n − 5, a slip in the constant. 0, 6, 12, 18 comes from using 6(n − 1) instead of 6n − 5, effectively shifting every term one position along.
- (b) √2 — 5√2 ÷ 5 = √2. Checking between the third and second terms: 10 ÷ 5√2 = √2 as well (since 10 ÷ 5√2 = 2 ÷ √2 = √2), so the common ratio is confirmed as √2 throughout. Squaring the ratio instead of leaving it as a surd gives 2, which is wrong because 2 is the SQUARE of the common ratio, not the ratio itself. Rounding the exact surd to a decimal gives 1.41, which is wrong because the sequence is defined using an exact surd ratio, and a rounded decimal is not the same value. Writing down the SECOND TERM of the sequence, 5√2, instead of the ratio BETWEEN terms, gives 5√2, which is wrong because a term of the sequence is not the same thing as the common ratio.
- (c) 3 — Method: a point that lies on a graph makes its equation true, so substituting the coordinates into y = mx + 6 leaves an equation in m alone. Working: substituting x = −2 and y = 0 gives 0 = m × (−2) + 6, which rearranges to −2m = −6, so m = (−6) ÷ (−2) = 3. Answer: 3. The distractors: −3 comes from dividing −6 by 2 and keeping the minus sign, overlooking that the divisor is negative too, so the two signs cancel; −2 comes from writing down the x-coordinate of the given point in place of the gradient; 6 comes from reading the constant in y = mx + 6 as the gradient, confusing m with c.
- (c) 3c + 2d — Method: 'triple c' is 3c, 'double d' is 2d, and 'add' joins the two separate terms with a plus sign. Working: 3c + 2d. Answer: 3c + 2d. 2c + 3d comes from swapping which letter gets tripled and which gets doubled. 6cd comes from multiplying the two terms together instead of adding them, and also multiplying the coefficients (3 × 2 = 6). 5(c + d) comes from adding the coefficients (3 + 2 = 5) and applying that single number to both letters together, as if c and d always came as a pair.
- (a) 5.8 — The horizontal distance is 3 and the vertical distance is 5, so using Pythagoras' theorem the distance is √(3² + 5²) = √34 = 5.8 (1 d.p.). A candidate who adds the two differences instead of using Pythagoras gets 3 + 5 = 8.0. A candidate who works out 3² + 5² = 34 but forgets to take the square root gets 34.0. A candidate who subtracts the squares instead of adding them gets √(5² − 3²) = √16 = 4.0.
- (a) −7 — The coefficient of xy is the number multiplying that exact term, including its sign: in 4x²y − 7xy + 2, the term in xy is −7xy, so the coefficient is −7. Answering 7 correctly picks out the number but drops the minus sign that belongs to it. Answering 4 picks the coefficient of the x²y term instead of the xy term — x²y and xy are different terms because their powers of x differ. Answering −5 combines −7 with the constant term +2, as though the coefficient of xy included the number with no letter attached to it. The coefficient of xy is −7.
- (d) Overestimate — the curve bends upward (convex). — The first differences of the speeds are 3, 5, 7 and 9, so the second differences are 2, 2 and 2 — constant and positive, which means the speed-time graph curves upwards (is convex). On a convex curve, each straight chord used by the trapezium rule lies above the curve, so the trapezium rule overestimates the true distance. 'Underestimate — the curve bends upward' states the same correct geometry but gets the conclusion backwards — a chord above the curve means too much area is counted, not too little. 'Overestimate — the speed values are increasing' uses the wrong evidence: increasing speed alone doesn't tell you whether the curve bends up or down, only the second differences do. 'Underestimate — second differences are constant' confuses a constant second difference with a steady rate of change in speed, which isn't what the second difference of a speed-time table measures.
- (c) x = 0 — Expand (x + 4)² correctly: (x + 4)² = x² + 8x + 16. This equals x² + 16 only when 8x is zero, i.e. when x = 0 — at every other value of x the two expressions differ by 8x. Choosing x = 4 confuses the constant inside the bracket with the value of x that makes the expressions match. Choosing x = −4 makes the same confusion but with the sign flipped. Choosing x = 8 mistakes the coefficient of the middle term, 8x, for the value of x itself.
- (c) t = 1 second and t = 5 seconds — The ball is at ground level when h = 0, which happens when either bracket is zero. t − 1 = 0 gives t = 1, and 5 − t = 0 gives t = 5. The option with t = −1 makes a sign error solving the first bracket. The option with t = −5 makes a sign error solving the second bracket, treating 5 − t = 0 as if it gave a negative solution. The option with t = 4 seconds is an arithmetic slip in solving 5 − t = 0.
- (d) x = −2, x = 6; y-intercept (0, 12) — Reflecting y = f(x) in the x-axis, to get y = −f(x), negates every y-value but leaves every x-value fixed. The x-intercepts happen where y = 0, and −0 = 0, so they are unaffected: y = −f(x) still crosses the x-axis at x = −2 and x = 6. The y-intercept is the value at x = 0: f(0) = −12, so −f(0) = 12, giving the point (0, 12) — the sign flips because the y-intercept is a nonzero y-value, unlike the roots. Writing 'x = 2, x = −6; y-intercept (0, −12)' comes from confusing −f(x) with f(−x) — reflecting in the y-axis instead of the x-axis, which negates the x-values of the intercepts (turning −2 into 2 and 6 into −6) but leaves f(0) unchanged, since f(−0) = f(0) = −12. Writing 'x = −2, x = 6; y-intercept (0, −12)' comes from forgetting that −f(x) is a reflection at all, and assumes both intercepts stay exactly as they were. Writing 'x = 2, x = −6; y-intercept (0, 12)' correctly negates the y-intercept but wrongly negates the x-intercepts too, as if a reflection in the x-axis also flipped the sign of every x-value.
- (d) −3 — Substitute y = 11 into y = 5 − 2x, giving 11 = 5 − 2x. Subtracting 5 from both sides gives 6 = −2x, so x = 6 ÷ (−2) = −3. A candidate who mishandles the negative sign when rearranging, treating the equation as 6 = 2x, gets x = 3. A candidate who correctly finds −2x = 6 but forgets to divide by 2 at all gets x = 6. A candidate who adds 5 and 11 instead of subtracting, getting 2x = 16, gets x = 8.
Build your own mix at the worksheet builder.