Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (d) (3, 0) — Method: every point on the x-axis has y-coordinate 0, so substituting y = 0 into the equation and solving gives the x-coordinate of the crossing point. Working: 0 = 2x − 6 gives 2x = 6, so x = 6 ÷ 2 = 3 and the graph crosses the x-axis at (3, 0). Answer: (3, 0). The distractors: (0, −6) is where the graph crosses the y-axis, found by substituting x = 0 rather than y = 0; (−3, 0) comes from moving the 6 across the equals sign without changing its sign, giving 2x = −6; (6, 0) comes from reading the constant straight off as the crossing point and never dividing by the gradient 2.
- (a) −10 — Method: multiply each bracket out, treating the second bracket as being multiplied by −3 because it is subtracted, then collect like terms. Working: 4(2x − 1) = 8x − 4 and −3(x + 2) = −3x − 6, so the expression becomes 8x − 4 − 3x − 6 − 5x; the x terms give 8x − 3x − 5x = 0, so no term in x survives, and the numbers give −4 − 6 = −10. Answer: −10. The distractors: 2 comes from expanding −3(x + 2) as −3x + 6, leaving the numbers −4 + 6; 5x − 10 comes from forgetting the final −5x, so the x terms give 8x − 3x = 5x; −7 comes from multiplying the 4 over only the first term of its bracket, giving 8x − 1 and so the numbers −1 − 6.
- (c) 4x − 3 — ff(x) means f(f(x)): substitute f(x) into f in place of x. f(f(x)) = 2 × f(x) − 1 = 2 × (2x − 1) − 1. Expanding the bracket: 2 × (2x − 1) = 4x − 2. Combining the constant terms: −2 − 1 = −3, so f(f(x)) = 4x − 3. Writing 4x − 2 comes from expanding 2(2x − 1) correctly to get 4x − 2, then forgetting to subtract the outer 1 at all. Writing 4x² − 4x + 1 comes from reading ff(x) as f(x) multiplied by itself, (2x − 1)(2x − 1) = 4x² − 4x + 1, instead of substituting f(x) into f. Writing 4x − 1 comes from doubling the coefficient of x in the original rule directly, without actually substituting f(x) into f at all.
- (a) n² + 4n + 4 — The whole patio-plus-border square has side length (n + 2), so the total is (n + 2)². Expanding this bracket correctly gives n² + 4n + 4, which matches 9, 16, 25, 36 for n = 1, 2, 3, 4. Expanding (n + 2)² by squaring each term separately, as if (a + b)² = a² + b², gives n² + 4, which is already wrong at n = 1 (it gives 5, not 9). Multiplying out (n + 2)(n + 2) as n² + 2n + 2n but forgetting the final 2 × 2 gives n² + 4n, which is 5 short at every value of n. Counting the patio twice — once as the n² inner square and again inside the (n + 2)² total — gives n² + (n² + 4n + 4) = 2n² + 4n + 4.
- (d) x³ + 6x² + 11x + 6 — (x + 1)(x + 2) = x² + 3x + 2. Multiplying by (x + 3): (x² + 3x + 2)(x + 3) = x³ + 3x² + 2x + 3x² + 9x + 6, which simplifies to x³ + 6x² + 11x + 6. Choosing x³ + 6x² + 6x + 6 has the right x² and constant terms but adds 1 + 2 + 3 = 6 for the x-coefficient instead of the correct sum of pairwise products 1×2 + 1×3 + 2×3 = 11. Choosing x³ + 5x² + 11x + 6 sums only two of the three constants (2 + 3 = 5) for the x² coefficient, leaving out the 1. Choosing x³ + 6x² + 11x + 5 adds the last two constants (2 + 3 = 5) instead of multiplying all three (1 × 2 × 3 = 6) for the constant term.
- (c) Line D — Method: the steeper of two lines is the one whose gradient is greater, and the gradient of a line through two points is the change in y divided by the change in x. Working: line C rises 2 for a run of 4, so its gradient is 2 ÷ 4 = 1/2; the other line rises 2 for a run of 2, so its gradient is 2 ÷ 2 = 1; since 1 is greater than 1/2, it is line D that is the steeper. Answer: Line D. The distractors: Line C is chosen by comparing the x-coordinates and calling the line that reaches further along the x-axis the steeper one; They are equally steep comes from comparing only the y-coordinates, which are both 2, without dividing by the two different runs; There is not enough information comes from believing that a gradient can only be measured off a drawn graph, when two points on a line are enough to work it out.
- (b) x ≤ 5 — Method: divide out the bracket first, then undo the number term; the inequality sign turns round only if both sides are multiplied or divided by a negative number. Working: dividing both sides of 2(x − 1) ≤ 8 by 2 gives x − 1 ≤ 4, and 2 is positive so the ≤ is unchanged; adding 1 to both sides gives x ≤ 5. Answer: x ≤ 5. The distractors: x ≤ 3 comes from subtracting 1 from 4 instead of adding 1 to both sides; x ≤ 4 comes from stopping at 8 ÷ 2 = 4 and never undoing the −1 inside the bracket; x < 5 comes from reading ≤ as a strict inequality, which wrongly leaves the boundary value out of the solution set.
- (d) 8(7x − 3) — Method: find the highest common factor of the two terms, write it in front of a bracket and divide each term by it. Working: 56 = 8 × 7 and 24 = 8 × 3, so the highest common factor is 8; dividing gives 56x ÷ 8 = 7x and 24 ÷ 8 = 3, and the subtraction sign stays between them. Answer: 8(7x − 3), which multiplies back out to 56x − 24. The distractors: 8(7x + 3) comes from dropping the minus sign of −24 while dividing; 8(56x − 3) comes from dividing only the number term by 8 and leaving 56x untouched inside the bracket; 8(7x − 16) comes from subtracting 8 from 24 instead of dividing 24 by 8.
- (b) 12n — Distributing the minus sign across the second bracket gives n² + 6n + 9 − n² + 6n − 9, and the n² terms and the +9/−9 cancel, leaving 6n + 6n = 12n. Writing 18 comes from only negating the first term of the second bracket, n², and treating the −6n and +9 as unchanged, which gives n² + 6n + 9 − n² − 6n + 9 = 18. Writing 2n² + 18 comes from adding the two brackets instead of subtracting them, (n² + 6n + 9) + (n² − 6n + 9) = 2n² + 18. Writing 6n comes from correctly negating the bracket but then only counting one of the two 6n terms, missing that they add rather than cancel.
- (c) 7 — To reverse the rule, subtract the constant then divide by the coefficient: 30−2=28, then 28÷4=7, so n=7. A candidate who adds the constant instead of subtracting it, a sign error when rearranging, would compute (30+2)÷4=32÷4=8. A candidate who subtracts the constant correctly but then forgets to divide by the coefficient would stop at 30−2=28. A candidate who treats 4n+2 as a single term 6n, adding the coefficient and constant together, would compute 30÷6=5.
- (c) y = 3x + 2 — Method: divide the change in the outputs by the change in the inputs to find the multiplier, then put one pair of values into the rule to find the number added on. Working: the output rises by 11 − 5 = 6 while the input rises by 3 − 1 = 2, so the multiplier is 6 ÷ 2 = 3; with an input of 1, 3 × 1 = 3 and the output is 5, so 2 is added. Answer: y = 3x + 2, checked against the second pair by 3 × 3 + 2 = 11. The distractors: y = 3x − 2 comes from finding the multiplier 3 and then subtracting the 2 instead of adding it; y = 2x + 3 comes from swapping the multiplier and the number added on; y = x + 4 comes from assuming the input is multiplied by 1 and using 5 − 1 = 4 as the number added on.
- (d) 12 m — Method: give the width a letter, write the length in terms of it and use length × width = area to form a quadratic. Working: with a width of x metres the length is x + 4, so x(x + 4) = 96, which rearranges to x² + 4x − 96 = 0; factorising gives (x + 12)(x − 8) = 0, and a width must be positive, so x = 8 and the length is 8 + 4 = 12. Answer: 12 m, and 12 × 8 = 96 as the area requires. The distractors: 8 m is the width rather than the length asked for; 16 m comes from taking the other root as 12 and adding 4 to it, ignoring that the root −12 cannot be a width; 24 m comes from dividing the area by the 4 in the question instead of forming an equation.
- (d) 1 — Method: find the step in the outputs for each step of 1 in the input, write the rule from that step and from one pair of values, then apply the rule to the last input. Working: the outputs −5, −3, −1 rise by 2 while x rises in ones, so x is multiplied by 2; at x = 1, 2 × 1 = 2 while y = −5, so 7 is subtracted, giving y = 2x − 7; at x = 4 the rule gives 2 × 4 = 8 and 8 − 7 = 1. Answer: y = 1. The distractors: 3 comes from carrying the outputs on one step too far, to x = 5; 0 comes from assuming the outputs −5, −3, −1 carry on by adding 1 rather than by adding 2; 8 comes from doubling the input and forgetting to subtract the 7.
- (d) x = (y + 8) / 3 — Method: add 8 to both sides, then divide the whole side by 3. Working: y = 3x − 8, so adding 8 to both sides gives y + 8 = 3x, then dividing both sides by 3 gives x = (y + 8) / 3. The value x = y + 8 / 3 is Priya's version, which comes from dividing only the 8 by 3 instead of dividing the whole expression y + 8 by 3. The value x = (y − 8) / 3 comes from a sign error, keeping −8 instead of moving it to +8. The value x = 3(y + 8) comes from multiplying by 3 instead of dividing.
- (b) 25 — Substitute n = 7: 4 × 7 − 3 = 28 − 3 = 25. Forgetting to subtract 3 gives 4 × 7 = 28. Subtracting 3 from 7 before multiplying by 4, 4 × (7 − 3) = 16, applies the operations in the wrong order. Substituting n = 8 by miscounting the position gives 4 × 8 − 3 = 29.
Build your own mix at the worksheet builder.