Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (c) Translate +1 in y; new range 0 ≤ y ≤ 2 — Adding 1 to sin x translates the graph 1 unit in the positive y-direction, and every y-value on the range increases by 1: −1 + 1 = 0 and 1 + 1 = 2, giving a new range of 0 ≤ y ≤ 2. A translation in the x-direction would not add anything to the y-values, so 'Translate +1 in x; range unchanged' correctly leaves the range at −1 ≤ y ≤ 1 for that (wrong) transformation, but the transformation itself is not what y = sin x + 1 shows. 'Translate +1 in y; new range −2 ≤ y ≤ 0' correctly spots the translation but subtracts 1 from each bound instead of adding it. 'Reflect in the x-axis' mistakes the transformation for a reflection rather than a translation; reflecting sin x in the x-axis does leave the range at −1 ≤ y ≤ 1 unchanged in size, but that is not the transformation y = sin x + 1 actually applies.
- (d) The fixed call-out fee, charged before the hourly rate. — Method: compare the formula with C = (fixed charge) + (rate) × h, where the fixed charge is the part that does not depend on h. Working: in C = 40 + 25h, the term 25h depends on the number of hours, h, but 40 does not change however many hours the job takes. Answer: 40 is the fixed call-out fee. 'The hourly rate' confuses the fixed term with the coefficient of h, which is actually 25. 'The total cost for a job lasting 1 hour' comes from substituting h = 1 into the formula (40 + 25 = 65) rather than reading off the constant term. 'The number of hours worked before charging starts' wrongly treats the constant, which is in pounds, as if it were measured in hours.
- (c) 1, 7, 13, 19 — Method: substitute n = 1, 2, 3, 4 into the rule 6n − 5 in turn. Working: n = 1: 6 − 5 = 1. n = 2: 12 − 5 = 7. n = 3: 18 − 5 = 13. n = 4: 24 − 5 = 19. Answer: 1, 7, 13, 19. 6, 12, 18, 24 comes from using 6n on its own, forgetting to subtract 5. 5, 11, 17, 23 comes from using the rule 6n − 1 instead of 6n − 5, a slip in the constant. 0, 6, 12, 18 comes from using 6(n − 1) instead of 6n − 5, effectively shifting every term one position along.
- (d) x = 4 and x = −4 — Substituting y = 3 gives x² + 9 = 25, which simplifies to x² = 16, so x = 4 or x = −4. Choosing 'x = 3 and x = −3' uses the given value y = 3 as if it were the x-coordinate. Choosing 'x = 4' alone finds the positive square root of 16 but forgets the negative root. Choosing 'x = 5 and x = −5' skips subtracting 3² = 9 from 25 and takes the square root of 25 directly.
- (b) x = −4, y = −3 and x = 3, y = 4 — Substitute y = x + 1 into x² + y² = 25: x² + (x + 1)² = 25, which expands to x² + x² + 2x + 1 = 25, giving 2x² + 2x − 24 = 0, or x² + x − 12 = 0. Factorise: (x + 4)(x − 3) = 0, so x = −4 or x = 3. Using y = x + 1: when x = −4, y = −3; when x = 3, y = 4. Distractor routes: x = 4, y = 5 and x = −3, y = −2 comes from mis-factorising x² + x − 12 as (x − 4)(x + 3), reversing the sign of each root. x = −4, y = −3 alone stops after finding the first root of the quadratic and never goes back for the second pair. x = 12, y = 13 comes from misreading x² + y² = 25 as the linear equation x + y = 25 and solving that together with y = x + 1.
- (a) (−6, −3) — Reflecting in the y-axis changes the sign of the x-coordinate and keeps the y-coordinate the same: (−6, −3). (6, 3) comes from reflecting in the x-axis instead, which changes the sign of the y-coordinate. (−6, 3) comes from reflecting in both axes. (6, −3) comes from not applying the reflection at all.
- (d) y = (1/4)x + 3 — The given line has gradient −4, so the perpendicular gradient is the negative reciprocal, 1/4. Since (0, 3) is the y-intercept, the perpendicular line is y = (1/4)x + 3. Distractor routes: y = −4x + 3 uses the original line's own gradient instead of the perpendicular gradient, only changing the intercept for the new point. y = (−1/4)x + 3 takes the reciprocal of −4 but forgets to change its sign, so it is not the true negative reciprocal. y = 4x + 3 negates the gradient −4 but does not take its reciprocal, giving 4 instead of 1/4.
- (a) (6, 8) — Method: a point lies on the circle x² + y² = 100 exactly when the squares of its two coordinates add to 100, so square both coordinates of each point and add them. Working: for (6, 8), 6² + 8² = 36 + 64 = 100, which matches the right-hand side of the equation. Answer: (6, 8) lies on the circle. The distractors: (3, 4) is the 3, 4, 5 right-angled triangle recalled but never scaled up to a radius of 10, and 3² + 4² = 25, so it lies on the far smaller circle x² + y² = 25; (5, 5) has coordinates adding to 10, which compares the sum of the coordinates with the radius instead of the sum of their squares with r², and 5² + 5² = 50; (10, 10) takes each coordinate separately to equal the radius, and 10² + 10² = 200, which is twice too big.
- (c) −0.5 — fg(x) = f(g(x)) = f(x²) = x² + 2. gf(x) = g(f(x)) = g(x + 2) = (x + 2)² = x² + 4x + 4. Setting fg(x) = gf(x): x² + 2 = x² + 4x + 4. Subtract x² from both sides: 2 = 4x + 4. Subtract 4 from both sides: −2 = 4x, so x = −0.5. Writing 1.5 comes from adding the 4 instead of subtracting it: 4x = 2 + 4 = 6, giving x = 1.5. Writing 'no solution' comes from expanding (x + 2)² as x² + 4 using (a + b)² = a² + b², losing the middle term — the equation then reads x² + 2 = x² + 4, which has no solution, but the expansion itself is wrong. Writing 0 comes from treating gf(x) as g(x) + f(x) instead of g(f(x)): x² + (x + 2) = x² + 2 gives x = 0, but that adds the two functions rather than composing them.
- (c) x = (y + 24)/4 — Method: expand the bracket first, then undo the operations done to x in reverse order. Working: y = 4(x − 6) = 4x − 24, so y + 24 = 4x, so x = (y + 24)/4. Answer: x = (y + 24)/4. x = (y + 6)/4 comes from expanding the bracket incorrectly, treating 4(x − 6) as 4x − 6 instead of 4x − 24. x = 4y + 96 comes from multiplying by 4 instead of dividing by 4 to undo the multiplication, giving 4(y + 24) = 4y + 96. x = y/4 − 6 comes from dividing by 4 first without expanding the bracket, then subtracting 6 as if the bracket's operation still applied afterwards.
- (a) Positive x-direction, 90°; image is y = sin x. — Writing cos(x − 90°) as cos(x − a) with a = 90 shows this is a horizontal translation, y = f(x − a), which moves the graph 90° in the positive x-direction; the identity cos(x − 90°) = sin x confirms the image is y = sin x. Choosing the negative x-direction reverses the sign inside the bracket — subtracting inside the bracket always translates in the positive x-direction, not the negative one, so that statement is wrong on direction. Getting the direction right but conflating the subtraction inside the bracket with an extra reflection of the output flips the sign of the resulting graph, wrongly giving y = −sin x. Treating the subtraction as if it changed the output directly, rather than the input, wrongly calls this a vertical translation even while still correctly recalling that the image simplifies to y = sin x.
- (a) x = 3/2 or x = −3/2 — Method: the equation has an x² term and a number but no x term, so make x² the subject and then take the square root of both sides, keeping the negative root as well as the positive one. Working: adding 9 to both sides of 4x² − 9 = 0 gives 4x² = 9, and dividing both sides by 4 gives x² = 9/4. Square-rooting the top and the bottom of 9/4 gives 3/2, so x = 3/2 or x = −3/2, and each value checks out because 4 × 9/4 − 9 = 0. Answer: x = 3/2 or x = −3/2. The distractors: x = 3 or x = −3 comes from square-rooting both sides of 4x² = 9 without first dividing by the 4, so the coefficient of x² is ignored; x = 9/4 or x = −9/4 comes from stopping at x² = 9/4 and writing that value down as x, leaving the square root undone; x = 3/2 only comes from taking the positive square root of 9/4 and losing the negative solution.
- (a) 18 — Method: substitute the value, apply the index before the multiplication, and remember that a negative number multiplied by itself gives a positive result. Working: x² = (−3) × (−3) = 9, and then 2 × 9 = 18. Answer: 18. The distractors: −18 comes from squaring only the 3 and leaving the minus sign outside the index, giving 2 × (−9); 36 comes from multiplying 2 by −3 first and squaring afterwards, giving (−6)²; −12 comes from reading x² as 2x, so that the calculation becomes 2 × 2 × (−3).
- (c) 5n + 1 — Method: find the common difference, then use it as the coefficient of n in the position-to-term rule, and find the constant by checking against the first term. Working: the common difference is 5, so the rule has the form 5n + c. Using the 1st term: 5(1) + c = 6, so c = 1. The rule is 5n + 1. Answer: 5n + 1. 5n − 1 uses the correct coefficient but the wrong sign for the constant. 6n comes from using the first term as the coefficient of n instead of the common difference — it matches the 1st term by coincidence but fails from the 2nd term onward. n + 5 swaps the coefficient and the constant around, using the common difference as the constant instead of the coefficient of n.
- (a) 4 — Method: set up the equation 35 + 20h = 115, then subtract the fixed fee and divide by the hourly rate. Working: 20h = 115 − 35 = 80; h = 80 ÷ 20 = 4. Answer: 4 hours. 5.75 comes from dividing the whole £115 by £20 without first subtracting the fixed fee: 115 ÷ 20 = 5.75. 2.71 comes from swapping the fee and the rate round, subtracting £20 and dividing by £35: (115 − 20) ÷ 35 ≈ 2.71. 7.5 comes from adding the fixed fee instead of subtracting it: (115 + 35) ÷ 20 = 7.5.
Build your own mix at the worksheet builder.