Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (d) Line 3 — Method: check each line of Chloe's working against the correct algebraic step. Working: Line 1 to Line 2 is correct, subtracting 2x from both sides gives 3x − 4 = 8. But Line 2 to Line 3 should add 4 to both sides, giving 3x = 12, not 3x = 4 — the constant −4 has been dropped rather than removed correctly. Line 4 follows correctly from Chloe's own, incorrect, Line 3. Answer: Line 3. Line 1 is simply the original equation, copied out correctly. Line 2 correctly subtracts 2x from both sides of Line 1. Line 4 divides Chloe's own Line 3 by 3 correctly — the arithmetic there is fine, the mistake happened one line earlier.
- (a) y = −3x − 5 — Gradient = (−8 − 4) ÷ (1 − (−3)) = −12 ÷ 4 = −3. Using the point (1, −8): −8 = −3(1) + c, so c = −5, giving y = −3x − 5. A candidate who drops the negative sign on the gradient, using m = 3 instead, would then solve −8 = 3(1) + c to get c = −11, writing y = 3x − 11. A candidate who makes a sign error isolating c, writing c = 5 instead of −5, would write y = −3x + 5. A candidate who mixes up both mistakes — keeping the correct gradient but the wrong, positive value of c from the flipped-gradient calculation — would write y = −3x + 11.
- (d) 66 — 6 and (4x + 3) are correct factors of 24x + 18. — Substituting x=2 into 24x+18: 24×2+18=48+18=66. Checking the factorisation: 6×4x=24x and 6×3=18, so 6(4x+3)=24x+18, matching the original expression — 6 and (4x+3) are correctly identified as factors. A candidate who substitutes x=2 into (4x+3) but forgets to multiply by the factor 6 afterwards would compute just 4×2+3=11. A candidate who adds 24 and 18 together before multiplying by x, instead of multiplying 24 by x first, would compute (24+18)×2=84. A candidate who distributes the 6 over only the first term inside the brackets, forgetting the second, would check the factorisation as 6×4x=24x but leave the 3 unmultiplied, getting 24x+3 instead of 24x+18 — and would wrongly conclude that 6 and (4x+3) are not correct factors.
- (c) 21.6 — m² = (−2.4)² = 5.76, since a negative number squared is positive, so 5m² = 28.8. Then 3m = 3 × (−2.4) = −7.2. Total: 28.8 + (−7.2) = 21.6. −36 comes from taking m² as negative, 5 × (−5.76) − 7.2 = −36, forgetting that squaring removes the negative sign. 36 comes from ignoring the negative sign on m altogether and using m = 2.4 throughout. 29.4 comes from treating 3m as 3 + m instead of 3 × m, giving 28.8 + (3 + (−2.4)).
- (b) −5 — Method: a point whose x-coordinate is 0 lies on the y-axis, so its y-coordinate is the constant c; once m and c are both known the equation can be written down and x substituted into it. Working: the line passes through (0, 1), so c = 1 and the equation is y = −3x + 1; substituting x = 2 gives y = −3 × 2 + 1 = −6 + 1 = −5. Answer: −5. The distractors: 7 comes from ignoring the minus sign on the gradient and working out 3 × 2 + 1; 5 comes from working out 3 × 2 = 6 and then using the minus sign to take the constant off the product, 6 − 1 = 5; −7 comes from subtracting the constant instead of adding it, −6 − 1 = −7.
- (d) 13 — Method: the numbers of matchsticks form a sequence with a term-to-term rule, so count the first square in full and then add the repeated amount once for every extra square. Working: one square uses 4 matchsticks; a row of 4 squares has 3 extra squares after the first, and each of those adds 3 matchsticks, giving 3 × 3 = 9 to add on to the 4. Answer: 13. The distractors: 16 comes from counting each square as a separate set of 4 matchsticks, 4 × 4, and ignoring the shared sides; 12 comes from using 3 matchsticks for all four squares, 3 × 4, and forgetting that the first square needs a fourth side; 10 comes from adding the 3 only twice, as though a row of four squares had two extra squares rather than three.
- (c) 55 — Continuing the pattern: 8+13=21 (5th term), 13+21=34 (6th term), 21+34=55 (7th term). A candidate who miscounts the position and stops one term early would give 34, the 6th term. A candidate who doubles the most recent term instead of adding the two before it would compute 34×2=68. A candidate who adds a non-adjacent pair — the 4th and 6th terms, skipping the 5th — would compute 13+34=47.
- (d) P lies outside the circle — The squared distance from the origin to P is 8² + 9² = 64 + 81 = 145, which is greater than 100, so P lies outside the circle. Choosing 'P lies inside the circle' comes from adding the coordinates directly (8 + 9 = 17) instead of squaring and adding them, and comparing 17 with 100. Choosing 'P lies on the circle' comes from squaring 9 incorrectly as 36 (as if it were 6²) instead of 81, giving 64 + 36 = 100, equal to the right-hand side. Choosing 'Cannot be determined' wrongly assumes the equation of the line itself is needed, when the radius and the distance from the origin to P are already enough.
- (c) y = 3x + 1 — Method: a line of known gradient m has equation y = mx + c, and c is found by substituting the coordinates of a point known to lie on it. Working: the gradient is 3, so the line is y = 3x + c; substituting x = 1 and y = 4 gives 4 = 3 × 1 + c, so c = 4 − 3 = 1. Answer: y = 3x + 1. The distractors: y = 3x − 1 comes from working out the constant as mx − y, 3 − 4 = −1, instead of y − mx; y = x + 3 comes from swapping the two numbers over, putting the gradient 3 in the constant position and the x-coordinate 1 in front of x; y = 3x + 4 comes from using the y-coordinate 4 as the constant without substituting.
- (d) 40 m — Each trapezium has width 2. Its area is width × the average of its two heights. Strip 1: average of 0 and 5 is 2.5, so area = 2 × 2.5 = 5. Strip 2: average of 5 and 9 is 7, so area = 2 × 7 = 14. Strip 3: average of 9 and 12 is 10.5, so area = 2 × 10.5 = 21. Total distance = 5 + 14 + 21 = 40 m. Leaving out the division by 2 in the averaging step doubles every strip, giving 80 m instead of 40 m. Using only the LEFT height of each strip as a rectangle, 0 × 2 + 5 × 2 + 9 × 2 = 28, or only the RIGHT height, 5 × 2 + 9 × 2 + 12 × 2 = 52, both ignore that the graph curves between the two ends of each strip — always average the two heights of a trapezium, never use just one of them.
- (b) x² + y² = 1369 — For a circle centred at the origin, the radius squared equals the sum of the squares of the coordinates of any point on it: r² = 12² + 35² = 144 + 1225 = 1369. The equation is x² + y² = 1369. x² + y² = 2209 comes from adding the coordinates first and then squaring the sum: (12 + 35)² = 47² = 2209, instead of squaring each coordinate separately. x² + y² = 1225 comes from using only 35² and leaving out the 12² term. x² + y² = 144 comes from using only 12² and leaving out the 35² term.
- (d) 68, and it is a formula — Substituting C = 20 gives F = 1.8 × 20 + 32 = 36 + 32 = 68. The statement F = 1.8C + 32 is a formula because it expresses a general relationship between F and C that holds for any value of C, not just C = 20. A candidate who gets the correct value but calls it an equation is confusing "has an equals sign" with "is an equation" — an equation is only true for particular value(s) of the unknown, whereas this relationship is used to calculate rather than to be solved. A candidate who forgets to multiply C by 1.8 and just adds 32 to 20 gets 52. A candidate who multiplies correctly but forgets to add 32 gets 36.
- (c) 22 m — Rearranging P = 2l + 2w for l gives l = (P − 2w)/2. Substituting P = 60 and w = 8: l = (60 − 16)/2 = 44/2 = 22 m. Answering 30 m comes from ignoring the width altogether and working out l = P/2, which only holds when w = 0. Answering 38 m comes from adding 2w instead of subtracting it: (60 + 16)/2 = 38. Answering 11 m comes from dividing by 4 instead of 2, as if the formula were P = 4l + 4w. The pen's length is 22 m.
- (a) 8 — f(x − 1) means every input to f is reduced by 1 before it is looked up. At x = 2, the input to f becomes 2 − 1 = 1, so f(x − 1) at x = 2 is f(1) = 8. Reading f(2) = 4 directly from the table, without applying the shift, gives 4. Shifting in the wrong direction, using x + 1 = 3 instead of x − 1 = 1, gives f(3) = 1. Confusing f(x − 1) with f(x) − 1 — taking f(2) = 4 and then subtracting 1 — gives 3.
- (b) Student B's — narrower strips fit the curve more closely. — The trapezium rule replaces the curve with straight-line segments; the narrower each strip, the more closely its straight edge follows the curve, so Student B's estimate with 8 narrower strips is more likely to be closer to the true area. Reasoning from the number of arithmetic steps rather than from how well the straight lines fit the curve gives the wrong claim that Student A makes fewer rounding errors. Believing the trapezium rule is exact, rather than an estimate that improves with narrower strips, gives the wrong claim that the two are always the same. Believing wider strips smooth out the curve better, rather than following it less closely, gives the wrong claim in favour of Student A's wider strips.
Build your own mix at the worksheet builder.