Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (b) x = y/3 − 2 — The bracket containing x has been multiplied by 3, so divide both sides by 3 first, which gives y/3 = x + 2. Subtracting 2 from both sides then leaves y/3 − 2 = x, so x = y/3 − 2. Taking the 2 away before dividing gives (y − 2)/3, which divides the 2 by 3 as well, although the 2 was never divided in the original formula. Adding 2 rather than subtracting it gives y/3 + 2, and multiplying by 3 instead of dividing gives 3y − 2.
- (b) 10 km — Method: find the constant speed from the graph (distance ÷ time for any point on the line), then multiply that speed by 20 minutes. Working: the line passes through (4 minutes, 2 km), so the speed is 2 ÷ 4 = 0.5 km per minute; in 20 minutes the cyclist travels 0.5 × 20 = 10 km. Answer: 10 km. Distractor refutation: 3 km comes from reading off the distance shown at the end of the plotted section (6 minutes) and stopping there, instead of extending the line to 20 minutes. 20 km comes from misreading the speed as 1 km per minute instead of 0.5 km per minute, doubling the true rate. 40 km comes from dividing 20 by the speed instead of multiplying by it, a reciprocal mix-up.
- (c) 32 — Using the rule 3n + 4: the 3rd term is 3 × 3 + 4 = 13, and the 5th term is 3 × 5 + 4 = 19, so their sum is 13 + 19 = 32. Forgetting to add the 4 for the 3rd term, 3 × 3 = 9, and adding the correct 5th term, gives 9 + 19 = 28. Rounding the 19 up to 20 to make the addition easier and then forgetting to take the extra 1 back off, 13 + 20 = 33, gives 33. Using the rule 4n + 3 instead of 3n + 4 gives 4 × 3 + 3 = 15 and 4 × 5 + 3 = 23, summing to 38.
- (d) 30° and 150° — The first solution is x = 30°, since sin 30° = 0.5. The graph of y = sin x is symmetrical about x = 90° between 0° and 180°, so the second solution is 180° − 30° = 150°. Adding 180° to the first solution instead of subtracting it from 180° gives 30° and 210°, but sin 210° = −0.5, not 0.5. Reflecting the first solution about x = 90° by adding 30° to 90° instead of subtracting from 180° gives 30° and 120°, but sin 120° = √3/2, not 0.5. Misremembering the standard value and using sin 45° = 0.5 instead of sin 30° = 0.5 gives 45° and 135°, but sin 45° = √2/2, not 0.5.
- (a) A translation by vector (0, 3) — y = x² + 3 adds a constant outside the squaring, so it is a vertical translation of y = x² — every point moves the same distance parallel to the y-axis, with no change in x. The vector is (0, 3), matching the +3. A vector of (3, 0) confuses this with a horizontal shift; (0, −3) has the right axis but the wrong sign, since the graph moves up, not down; a stretch changes the shape of the curve, which adding a constant term never does.
- (d) x = 4 or x = −4 — Method: divide both sides by 2 to get x² = 16, then take the square root of both sides: x = 4 or x = −4. Distractor origins: x = 4 forgets the negative root; x = 8 comes from halving 16 instead of taking its square root; x = 16 stops at x² = 16 without ever taking the square root.
- (a) 27 — Method: let the smaller number be n, so the larger number is n + 9. Form the equation n + (n + 9) = 45. Working: simplify: 2n + 9 = 45, so 2n = 36, giving n = 18. The larger number is 18 + 9 = 27. Answer: 27. 18 is the smaller number, found correctly, but given as the answer to the question asking for the larger number. 22.5 comes from ignoring the "9 more" part and simply halving the total, 45 ÷ 2. 36 comes from a sign error when isolating the constant, treating the equation as 2n = 45 + 9 instead of 2n = 45 − 9.
- (c) x = 0 or x = −7 — Factorising: x² + 7x = x(x + 7) = 0, so x = 0 or x + 7 = 0, giving x = 0 or x = −7. A candidate who divides both sides of the original equation by x, which loses the solution x = 0, gets only x = −7. A candidate who makes a sign error solving x + 7 = 0 gets x = 0 or x = 7. A candidate who misreads the coefficient and doubles it gets x = 0 or x = −14.
- (b) 6 — Reflecting y = f(x) in the x-axis turns the minimum point (2, −3) into a maximum point at (2, 3), since −f(x) negates every y-value: −(−3) = 3. Adding a then gives 3 + a = 9, so a = 9 − 3 = 6. Forgetting the reflection and using the original y-value of −3 gives −3 + a = 9, so a = 12 — this ignores that −f(x) changes the sign of the y-coordinate before a is added. Writing a = −12 comes from subtracting in the wrong order, working out 9 − (−3) as −3 − 9 instead. Writing a = −6 comes from taking the negative of the correct answer, as if the final value of a needed to be reflected too, on top of the turning point.
- (a) 25 — Gradient = change in y ÷ change in x = (100 − 0) ÷ (4 − 0) = 100 ÷ 4 = 25. Dividing time by distance instead of distance by time gives 0.04; multiplying the two values instead of dividing gives 400; stopping at the change in distance, 100, forgets to divide by the change in time.
- (b) 25 — The tangent at (9, 12) is 9x + 12y = 225. Setting y = 0 (the x-axis): 9x = 225, so x = 25. Choosing 18.75 comes from swapping the coefficients in the tangent equation (using 12x + 9y = 225) before setting y = 0. Choosing 15 is where the circle itself meets the x-axis (from x² = 225), not where the tangent does. Choosing 9 is just the x-coordinate of the original point (9, 12), not the point P.
- (d) x = −2, x = 6; y-intercept (0, 12) — Reflecting y = f(x) in the x-axis, to get y = −f(x), negates every y-value but leaves every x-value fixed. The x-intercepts happen where y = 0, and −0 = 0, so they are unaffected: y = −f(x) still crosses the x-axis at x = −2 and x = 6. The y-intercept is the value at x = 0: f(0) = −12, so −f(0) = 12, giving the point (0, 12) — the sign flips because the y-intercept is a nonzero y-value, unlike the roots. Writing 'x = 2, x = −6; y-intercept (0, −12)' comes from confusing −f(x) with f(−x) — reflecting in the y-axis instead of the x-axis, which negates the x-values of the intercepts (turning −2 into 2 and 6 into −6) but leaves f(0) unchanged, since f(−0) = f(0) = −12. Writing 'x = −2, x = 6; y-intercept (0, −12)' comes from forgetting that −f(x) is a reflection at all, and assumes both intercepts stay exactly as they were. Writing 'x = 2, x = −6; y-intercept (0, 12)' correctly negates the y-intercept but wrongly negates the x-intercepts too, as if a reflection in the x-axis also flipped the sign of every x-value.
- (b) y = 2x and y = −(1/2)x + 1 — Method: two lines are perpendicular when the product of their gradients is −1, so the gradient of each line is read from the number multiplying x and the two are multiplied together. Working: for y = 2x and y = −(1/2)x + 1 the gradients are 2 and −1/2, and 2 × (−1/2) = −1, so that pair is perpendicular. Answer: y = 2x and y = −(1/2)x + 1. The distractors: the pair y = 2x and y = 2x + 1 has equal gradients, whose product is 4, so those two lines are parallel and never meet, and they are chosen by a candidate applying the parallel condition; the pair y = 2x and y = −2x + 1 comes from changing the sign of the gradient without turning it upside down, and its product is −4; the pair y = 2x and y = (1/2)x + 1 comes from turning the gradient upside down without changing its sign, and its product is 1.
- (a) (40, 0) — Method: a graph crosses the x-axis where y = 0, which in this context is the moment the tank holds no water, so substituting y = 0 and solving gives the time. Working: 0 = −5x + 200 gives 5x = 200, so x = 200 ÷ 5 = 40 and the crossing point is (40, 0); the tank is empty after 40 minutes. Answer: (40, 0). The distractors: (0, 200) is the y-axis crossing, the 200 litres in the tank at the start, found by substituting x = 0 instead of y = 0; (200, 0) comes from reading the constant 200 as the x-coordinate without dividing by the 5 litres lost each minute; (0, 40) has the right number in the wrong place, with the time written as a y-coordinate.
- (a) (3, 7) — y = f(x) + 5 is a vertical translation of y = f(x) by 5 units up — the translation vector is (0, 5) — so only the y-coordinate of any point changes. Turning point (3, 2) → (3, 2 + 5) = (3, 7). Adding the 5 to the x-coordinate, or treating it as a horizontal shift like y = f(x + 5), moves the wrong coordinate — check first whether the number sits inside or outside the brackets.
Build your own mix at the worksheet builder.