Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (d) g is one-to-one: f(3) = f(−3), removed by x ≥ 0 — A function has an inverse only if it is one-to-one: every output must come from exactly one input. f(3) = 9 and f(−3) = 9, so two different inputs give the same output, and there is no way to send 9 back to a single input — f is not one-to-one over all real x. Restricting the domain to x ≥ 0 removes one of the two inputs behind every such pair, so g is one-to-one and does have an inverse. 'g's outputs are positive; f's could be negative' is wrong because f(x) = x² also only gives outputs of 0 or more — the outputs of f and g are identical sets; it is the INPUTS that differ, not the outputs. 'Restricting any domain always creates an inverse' is wrong because a restriction only helps if it actually removes the repeated outputs: restricting f(x) = x² to x ≥ −3 still leaves f(1) = f(−1) = 1, so that restricted function is still not one-to-one and still has no inverse. 'Squares can never be reversed, under any conditions' is wrong because √9 = 3 does reverse 3² = 9 once you know the input was non-negative — a square root just cannot tell you WHICH of two inputs you started from unless the domain has already ruled one of them out.
- (c) x = 0 or x = −7 — Factorising: x² + 7x = x(x + 7) = 0, so x = 0 or x + 7 = 0, giving x = 0 or x = −7. A candidate who divides both sides of the original equation by x, which loses the solution x = 0, gets only x = −7. A candidate who makes a sign error solving x + 7 = 0 gets x = 0 or x = 7. A candidate who misreads the coefficient and doubles it gets x = 0 or x = −14.
- (c) 21.6 — m² = (−2.4)² = 5.76, since a negative number squared is positive, so 5m² = 28.8. Then 3m = 3 × (−2.4) = −7.2. Total: 28.8 + (−7.2) = 21.6. −36 comes from taking m² as negative, 5 × (−5.76) − 7.2 = −36, forgetting that squaring removes the negative sign. 36 comes from ignoring the negative sign on m altogether and using m = 2.4 throughout. 29.4 comes from treating 3m as 3 + m instead of 3 × m, giving 28.8 + (3 + (−2.4)).
- (a) 842.0 — The radius to (20, 21) has gradient 21/20, so the tangent's gradient is −20/21. The tangent line is y − 21 = −20/21(x − 20), i.e. y = −20/21x + 841/21. Setting y = 0 gives the x-intercept x = 841/20 = 42.05; setting x = 0 gives the y-intercept y = 841/21 ≈ 40.048. The area of triangle OPQ is 1/2 × 42.05 × 40.048 ≈ 842.0. 1684.0 comes from multiplying the two intercepts without the 1/2 that a triangle's area needs — twice the correct area. 580.7 comes from using the circle's radius, 29, as a side of the triangle instead of the x-intercept, 42.05: 1/2 × 29 × 40.048 ≈ 580.7. 2.0 comes from a sign error in the tangent's gradient — using 20/21 instead of −20/21 — which gives a different line, with intercepts x ≈ −2.05 and y ≈ 1.952, and area 1/2 × 2.05 × 1.952 ≈ 2.0.
- (d) x = 0, y = −1 and x = 3, y = 5 — Set the two expressions for y equal: 2x − 1 = x² − x − 1. Rearranging, subtracting 2x and adding 1 to both sides: 0 = x² − x − 1 − 2x + 1 = x² − 3x, so x² − 3x = 0. Factorise: x(x − 3) = 0, giving x = 0 or x = 3. Using y = 2x − 1: x = 0 gives y = −1; x = 3 gives y = 5. Distractor routes: x = 0, y = −1 alone stops after the factor x = 0 and never checks the second factor, x − 3 = 0. x = 0, y = −1 and x = −3, y = −7 comes from mis-factorising x² − 3x as x(x + 3), a sign error that gives a second root of −3 instead of 3. x = −2, y = −5 and x = 1, y = 1 comes from adding 2x to both sides instead of subtracting it when rearranging, giving x² + x − 2 = 0 instead of x² − 3x = 0.
- (a) 6 — Subtracting the second equation from the first: the x-terms, 4x and 4x, cancel; the y-terms combine as 3y − (−y) = 4y; and the right-hand sides give 25 − 1 = 24. This gives 4y = 24, so y = 6. A candidate who subtracts in the wrong order would get 4y = 1 − 25 = −24, so y = −6. A candidate who forgets the sign on the −y term, treating 3y − y as 2y, would get 2y = 24, so y = 12. A candidate who divides 24 by 6 instead of 4 would get y = 4.
- (a) 11 — 2n − 7 = 15, so adding 7 to both sides gives 2n = 22, and dividing by 2 gives n = 11. A candidate who makes a sign error and forms the equation 2n + 7 = 15 gets 2n = 8 and n = 4. A candidate who correctly adds 7 to get 2n = 22 but forgets to divide by 2 gets n = 22. A candidate who ignores the −7 altogether and solves 2n = 15 gets n = 7.5.
- (a) y = (4/3)x + 25/3 — The radius from (0, 0) to (−4, 3) has gradient 3 ÷ (−4) = −3/4. The tangent is perpendicular to the radius, so its gradient is the negative reciprocal, 4/3. Using y − y₁ = m(x − x₁) with the point (−4, 3): y − 3 = (4/3)(x + 4), so y = (4/3)x + 16/3 + 3 = (4/3)x + 25/3. Using the radius's own gradient, −3/4, instead of taking the perpendicular gradient, gives y − 3 = (−3/4)(x + 4), which simplifies to y = −(3/4)x once the −3 and +3 in the constant cancel out. Taking the reciprocal of the radius's gradient but keeping the wrong sign, using −4/3 instead of 4/3, gives y = −(4/3)x − 7/3. Correctly finding the gradient 4/3 and expanding the bracket, but forgetting to add the y-coordinate 3 at the end, gives y = (4/3)x + 16/3.
- (c) (2n + 1)² + (2n + 3)² = (4n² + 4n + 1) + (4n² + 12n + 9) = 8n² + 16n + 10 = 8(n² + 2n + 1) + 2, and n² + 2n + 1 is an integer, so the sum is always 2 more than a multiple of 8. — Expand each square carefully: (2n + 1)² = 4n² + 4n + 1 and (2n + 3)² = 4n² + 12n + 9, since the cross term is 2 × 2n × 3 = 12n. Adding gives 8n² + 16n + 10, and factorising out 8 from every term that can hold one gives 8(n² + 2n + 1) + 2; since n² + 2n + 1 is always an integer, the sum is always 2 more than a multiple of 8. The attempt reaching 8(n² + 2n) + 10 has the correct expansion but stops the factorisation one step early — it never pulls a further 8 out of the 10 (10 = 8 + 2), so 'always 10 more than a multiple of 8' should be reduced to 'always 2 more than a multiple of 8'. The attempt reaching 2(4n² + 8n + 5) also has the correct expansion, and the factorisation is true, but 'always even' only shows the sum is a multiple of 2 — being even is necessary but nowhere near sufficient to be a multiple of 8, and the argument never finds the extra factor of 4. The fourth attempt makes an expansion slip, using (2n + 3)² = 4n² + 9 instead of 4n² + 12n + 9 — dropping the 12n cross term entirely — so it works from the wrong expression 8n² + 4n + 10 throughout, and no amount of correct working afterwards can recover the right conclusion.
- (d) 12 — Method: substitute the value into both terms, remembering that subtracting a negative number has the same effect as adding the matching positive number. Working: n² = (−3) × (−3) = 9, and subtracting n means subtracting −3, which adds 3, so the calculation is 9 + 3 = 12. Answer: 12. The distractors: 6 comes from subtracting 3 rather than subtracting −3, giving 9 − 3; −6 comes from squaring −3 as −9 while still adding the 3, giving −9 + 3; −3 comes from reading n² as 2n, giving 2 × (−3) = −6 and then −6 + 3.
- (b) −23 — Expand two of the three brackets first: (x + 5)(x − 2) = x² + 3x − 10. Then multiply this by the remaining bracket: (2x − 1)(x² + 3x − 10) = 2x³ + 6x² − 20x − x² − 3x + 10, which simplifies to 2x³ + 5x² − 23x + 10, so the coefficient of x is −23. Writing −13 comes from a sign slip in the first expansion, combining 5x − 2x as −5x − 2x = −7x instead of +3x, which carries through to a wrong final coefficient. Writing −20 comes from forgetting to distribute the −1 across every term of x² + 3x − 10, dropping the −1 × 3x = −3x contribution. Writing 10 comes from reading off the constant term of the expansion instead of the coefficient of x.
- (a) The equation has one solution; the inequality has many. — Method: solve each statement. From 2x + 3 = 11, 2x = 8, so x = 4 — a single value. From 2x + 3 > 11, 2x > 8, so x > 4 — every number greater than 4 makes the inequality true, so there are many solutions. So the equation has one solution and the inequality has many. Distractor origins: swapping the two round gives the range to the equation and the single value to the inequality; saying both have exactly one solution treats the > sign as if it were an = sign; saying both have many solutions treats the equation as if it were an inequality.
- (b) Translate −90° in x, then translate −2 in y. — cos(x + 90°) translates the graph 90° in the NEGATIVE x-direction, since a positive shift inside the bracket moves a graph left, not right, and subtracting 2 afterwards translates it 2 units in the negative y-direction (down). So the sequence is: translate −90° in x, then translate −2 in y. Using +90° in x reverses the direction of the horizontal shift — the sign inside the bracket moves the graph the opposite way to what it looks like. Using +2 in y reverses the direction of the vertical shift; subtracting 2 outside the function moves the graph down, not up. Describing the −2 as a reflection in the x-axis is wrong because a reflection turns positive y-values negative and vice versa, whereas here every y-value is simply reduced by the fixed amount 2, which is what a translation does, not a reflection.
- (d) 680 m — First find how long the acceleration takes: acceleration = change in speed ÷ time, so 2.5 = 20 ÷ t, giving t = 20 ÷ 2.5 = 8 seconds. The distance during this phase is the area of a triangle with base 8 and height 20: 1/2 × 8 × 20 = 80 m. The distance during the constant-speed phase is 20 × 30 = 600 m, since distance = speed × time at a constant speed. The total distance is 80 + 600 = 680 m. Using the given 30 seconds for the acceleration phase as well, 1/2 × 30 × 20 = 300, plus the correct 600, gives 900 m — but 30 seconds is only stated for the constant-speed phase. Leaving out the 1/2 and using the full rectangle for the acceleration phase, 8 × 20 = 160, plus the correct 600, gives 760 m — the speed is not constant during acceleration, so this area is a triangle, not a rectangle. Swapping the two times round, and using 8 seconds for the constant-speed distance instead of 30, 20 × 8 = 160, plus the correct triangle area of 80, gives 240 m.
- (c) (2, 5) — Reflecting in the x-axis keeps the x-coordinate the same and changes the sign of the y-coordinate: Q = (2, 5). (−2, −5) comes from reflecting in the y-axis instead, which changes the sign of the x-coordinate. (−2, 5) comes from reflecting in both axes. (2, −5) comes from not applying the reflection at all.
Build your own mix at the worksheet builder.