Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (d) g is one-to-one: f(3) = f(−3), removed by x ≥ 0 — A function has an inverse only if it is one-to-one: every output must come from exactly one input. f(3) = 9 and f(−3) = 9, so two different inputs give the same output, and there is no way to send 9 back to a single input — f is not one-to-one over all real x. Restricting the domain to x ≥ 0 removes one of the two inputs behind every such pair, so g is one-to-one and does have an inverse. 'g's outputs are positive; f's could be negative' is wrong because f(x) = x² also only gives outputs of 0 or more — the outputs of f and g are identical sets; it is the INPUTS that differ, not the outputs. 'Restricting any domain always creates an inverse' is wrong because a restriction only helps if it actually removes the repeated outputs: restricting f(x) = x² to x ≥ −3 still leaves f(1) = f(−1) = 1, so that restricted function is still not one-to-one and still has no inverse. 'Squares can never be reversed, under any conditions' is wrong because √9 = 3 does reverse 3² = 9 once you know the input was non-negative — a square root just cannot tell you WHICH of two inputs you started from unless the domain has already ruled one of them out.
- (d) 4.521 — x₁ = √(3 × 4 + 7) = √19 = 4.358898944. x₂ = √(3 × 4.358898944 + 7) = √20.076696833 = 4.480702716. x₃ = √(3 × 4.480702716 + 7) = √20.442108148 = 4.521294964, which rounds to 4.521. Mislabelling the starting value x₀ as x₁, so that the working stops one iteration too early, reports the true x₂ = 4.480702716, which rounds to 4.481. Working out one iteration too many reports the true x₄ = √(3 × 4.521294964 + 7) = 4.534741987, which rounds to 4.535. Applying the formula in the wrong order, calculating √(3xₙ) + 7 at every step instead of √(3xₙ + 7), gives, from x₀ = 4: √12 + 7 = 10.464101615, then √(3 × 10.464101615) + 7 = 12.602883619, then √(3 × 12.602883619) + 7 = 13.148873950, which rounds to 13.149.
- (c) The object was stationary (not moving) — On a distance-time graph, the gradient at any point represents the speed at that point. A gradient of 0 means distance is not changing over time, so the object is stationary. A straight, sloped line (not flat) shows constant nonzero speed; a curve bending one way shows acceleration or deceleration; a flat section is not a maximum speed — it is no speed at all. Read the shape of the graph, not just how steep it looks.
- (c) 72 m — The first section is a triangle with base 4 s and height 8 m/s, area = 1/2 × 4 × 8 = 16 m. The middle section is a rectangle with base 6 s and height 8 m/s, area = 6 × 8 = 48 m. The final section is a triangle with base 2 s and height 8 m/s, area = 1/2 × 2 × 8 = 8 m. Total distance = 16 + 48 + 8 = 72 m. Treating both sloping sections as full rectangles instead of triangles — forgetting the factor of a half — gives 4 × 8 + 6 × 8 + 2 × 8 = 96 m, which is wrong because a sloping speed-time section is a triangle, not a rectangle. Leaving out the final, decreasing section entirely gives 16 + 48 = 64 m, which is wrong because the cyclist is still moving and covering distance while slowing down. Leaving out the middle, constant-speed section gives 16 + 8 = 24 m, which is wrong because the cyclist covers the most distance of all during the 6 seconds of constant speed.
- (a) A translation by vector (0, 3) — y = x² + 3 adds a constant outside the squaring, so it is a vertical translation of y = x² — every point moves the same distance parallel to the y-axis, with no change in x. The vector is (0, 3), matching the +3. A vector of (3, 0) confuses this with a horizontal shift; (0, −3) has the right axis but the wrong sign, since the graph moves up, not down; a stretch changes the shape of the curve, which adding a constant term never does.
- (d) 13 — Method: the numbers of matchsticks form a sequence with a term-to-term rule, so count the first square in full and then add the repeated amount once for every extra square. Working: one square uses 4 matchsticks; a row of 4 squares has 3 extra squares after the first, and each of those adds 3 matchsticks, giving 3 × 3 = 9 to add on to the 4. Answer: 13. The distractors: 16 comes from counting each square as a separate set of 4 matchsticks, 4 × 4, and ignoring the shared sides; 12 comes from using 3 matchsticks for all four squares, 3 × 4, and forgetting that the first square needs a fourth side; 10 comes from adding the 3 only twice, as though a row of four squares had two extra squares rather than three.
- (a) It gets closer to zero but never actually reaches it. — y = 60 × (0.5)ˣ is always positive, however large x is, because a positive number raised to any power stays positive. As x increases, (0.5)ˣ gets smaller and smaller but never equals zero, so y approaches zero without ever reaching it. Believing the curve reaches zero when x = 60, because 60 is the starting value, mixes up the y-intercept with a stopping point — an exponential decay curve like this one never actually reaches the x-axis, so this is wrong. Believing the curve goes negative for large x is wrong because multiplying a positive number by (0.5) any number of times can never produce a negative result. Believing the curve levels off at y = 0.5, confusing the base of the exponential with its eventual level, is wrong: the base only controls how fast the curve falls, not where it settles — this curve settles at y = 0, not y = 0.5. Whenever you sketch an exponential decay curve, draw it approaching the x-axis but never touching it.
- (a) 16 — A and B share the same y-coordinate, so the distance between them is the horizontal difference between their x-coordinates: 8 − (−8) = 16, giving a chord of length 16. Choosing 8 gives only the x-coordinate of one point, not the full distance between the two points. Choosing 34 is the diameter of the circle (2 × 17), not the length of this particular chord. Choosing 17 is the radius — the distance from the centre to A or to B, not from A to B.
- (b) x = 3, y = 4 — −x² + 6x − 5 = −(x² − 6x) − 5 = −[(x − 3)² − 9] − 5 = −(x − 3)² + 9 − 5 = −(x − 3)² + 4. Because the coefficient of x² is negative, −(x − 3)² is at most zero, so this turning point is a maximum. Substituting x = 3 gives (x − 3)² = 0, so y = 4, confirming the maximum value 4 at x = 3: turning point (3, 4). Using 6 instead of half of 6 inside the bracket — forgetting to halve before completing the square — lands on turning point (6, 31), wrong, because only half the coefficient belongs inside the bracket. Reading the bracket's sign directly as the turning point's x-coordinate gives (−3, 4) — wrong, because (x − 3)² is zero at x = 3, not x = −3. Computing 5 − 9 = −4 instead of 9 − 5 = 4 flips the sign of the constant, giving (3, −4) — wrong, since the constant must be evaluated as 9 minus 5, not 5 minus 9. Whenever the leading coefficient is negative, the turning point is a maximum, not a minimum — check by substituting back into the original equation.
- (a) 6 — Subtracting the second equation from the first: the x-terms, 4x and 4x, cancel; the y-terms combine as 3y − (−y) = 4y; and the right-hand sides give 25 − 1 = 24. This gives 4y = 24, so y = 6. A candidate who subtracts in the wrong order would get 4y = 1 − 25 = −24, so y = −6. A candidate who forgets the sign on the −y term, treating 3y − y as 2y, would get 2y = 24, so y = 12. A candidate who divides 24 by 6 instead of 4 would get y = 4.
- (b) n² + 4n — First differences of 5, 12, 21, 32, 45 are 7, 9, 11, 13. Second differences are 2, 2, 2, so a = 2 ÷ 2 = 1. Subtracting n² (1, 4, 9, 16, 25) from the totals (5, 12, 21, 32, 45) leaves 4, 8, 12, 16, 20, the linear expression 4n. So the number of oranges is n² + 4n. Using the second difference itself as the coefficient of n², without halving it, gives 2n² + 4n. Finding a = 1 correctly but dropping the linear remainder 4n entirely leaves n². Treating the first first difference (7) as a constant common difference and building a linear formula 5 + 7(n − 1) = 7n − 2 fits only the first two totals, and gives 19 for n = 3 instead of 21.
- (c) 6 — Method: rate = amount of fuel used ÷ time taken. Working: fuel used = 50 − 38 = 12 litres, time taken = 2 hours, so rate = 12 ÷ 2 = 6 litres per hour. Answer: the rate is 6 litres per hour. 44 comes from finding the average of the two fuel amounts, (50 + 38) ÷ 2, instead of the fuel used. 12 comes from working out the fuel used but forgetting to divide by the time taken. 19 comes from dividing the remaining fuel, 38, by the time taken instead of the fuel used.
- (d) 6 — Method: collect the x-terms on one side and the constants on the other, then divide by the remaining coefficient of x. Working: 6x − 3x = 13 + 5, so 3x = 18, x = 18 ÷ 3 = 6. Answer: x = 6. 2.67 comes from a sign error when moving the 5, subtracting instead of adding: 3x = 13 − 5 = 8, x = 8 ÷ 3 ≈ 2.67. 2 comes from a sign error when moving the x-term, adding instead of subtracting: 9x = 18, x = 2. 18 comes from correctly finding 3x = 18 but forgetting to divide by 3.
- (c) x = (y + 24)/4 — Method: expand the bracket first, then undo the operations done to x in reverse order. Working: y = 4(x − 6) = 4x − 24, so y + 24 = 4x, so x = (y + 24)/4. Answer: x = (y + 24)/4. x = (y + 6)/4 comes from expanding the bracket incorrectly, treating 4(x − 6) as 4x − 6 instead of 4x − 24. x = 4y + 96 comes from multiplying by 4 instead of dividing by 4 to undo the multiplication, giving 4(y + 24) = 4y + 96. x = y/4 − 6 comes from dividing by 4 first without expanding the bracket, then subtracting 6 as if the bracket's operation still applied afterwards.
- (d) −2 — Method: run the machine backwards, undoing the operations in the opposite order and swapping each one for its inverse. Working: the machine added 7 last, so take 7 off the output: 1 − 7 = −6; before that the machine had multiplied by 3, so divide: −6 ÷ 3, and a negative divided by a positive stays negative. Answer: −2, which checks because 3 × (−2) + 7 = −6 + 7 = 1. The distractors: 2 comes from dividing 6 by 3 and losing the minus sign; −6 comes from taking the 7 off and stopping there, never undoing the multiplication; −18 comes from multiplying −6 by 3 instead of dividing by 3.
Build your own mix at the worksheet builder.