Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (a) Yes — the gradients multiply to −2 × 1/2 = −1. — Rearrange Q into the form y = mx + c: 2y = x + 6 gives y = (1/2)x + 3, so Q has gradient 1/2. P has gradient −2. Two lines are perpendicular exactly when the product of their gradients is −1: −2 × 1/2 = −1. Since this holds, P and Q are perpendicular. Distractor routes: "the product is −1, but perpendicular needs 1" works out the product correctly but misremembers the condition — the perpendicular test is a product of exactly −1, and parallel lines are spotted by their gradients being equal, not by a product of 1. "Q's gradient is 2, and −2 × 2 = −4" comes from reading the 2 in front of y in 2y = x + 6 as the gradient, instead of dividing the whole equation by 2 first to reach y = (1/2)x + 3, where the gradient is 1/2. "Both equations have a negative x-term" is not a valid test at all — P's equation does have a negative x-term, but Q's, once rearranged, does not, and matching signs say nothing about the actual gradients.
- (b) (x + 2)/3 — Start with y = 3x − 2 and swap x and y: x = 3y − 2. Add 2 to both sides: x + 2 = 3y. Divide both sides by 3: y = (x + 2)/3, so f⁻¹(x) = (x + 2)/3. Writing x/3 + 2 comes from dividing only the 3y term by 3 and leaving the +2 outside the division — the 2 must be added before you divide, not after. Writing (x − 2)/3 comes from keeping the subtraction sign instead of flipping it to addition when the −2 is moved across the equals sign. Writing 3x + 2 comes from swapping x and y but never actually solving for y — just changing the sign of the constant term.
- (a) x > 4 — Subtract 2x from both sides: 3x − 3 > 9. Add 3 to both sides: 3x > 12. Divide both sides by 3: x > 4. A candidate who subtracts 3 from 9 instead of adding gets 3x > 6, so x > 2. A candidate who divides correctly but wrongly flips the inequality (as if dividing by a negative) gets x < 4. A candidate who multiplies by 3 instead of dividing gets x > 36.
- (a) 4 — The gradient of a straight line through two points is the change in y divided by the change in x. Change in y = 21 − 5 = 16. Change in x = 6 − 2 = 4. Gradient = 16 ÷ 4 = 4. Dividing x by y instead of y by x gives 0.25; forgetting to divide by the change in x at all leaves 16; dividing by only one of the two x-coordinates, 16 ÷ 2 = 8, uses the wrong denominator.
- (c) Wrong — the correct equation is x² − 5x + 4 = 0. — Rearranging x − 2 = x² − 4x + 2 by moving every term across: 0 = x² − 4x + 2 − x + 2 = x² − 5x + 4. The candidate's x-term is wrong: combining −4x with the moved −x gives −4x − x = −5x, not −3x. So the correct equation is x² − 5x + 4 = 0. Distractor routes: "x² − 3x + 4 = 0 is correct" simply agrees with the candidate's sign error without checking it. "It should be x² − 5x − 4 = 0" correctly spots that something is wrong but blames the wrong term — the constant, 2 + 2 = 4, is correct; the error is in the x-term. "Subtracting is the same as adding" states something false: subtracting a term and adding it give different signs.
- (c) 71 — Method: square x first, then multiply by 3, then subtract 4, following the order of operations. Working: x² = 5² = 25; 3 × 25 = 75; 75 − 4 = 71. Answer: 71. 221 comes from squaring (3x) as a whole first: (3 × 5)² = 225, then − 4 = 221, squaring the coefficient along with x. 75 comes from correctly working out 3x² but forgetting to subtract the 4. 3 comes from subtracting the 4 from x before squaring: (5 − 4)² × 3 = 3, doing the operations in the wrong order.
- (b) x ≤ 4 — Method: undo the number subtracted from 3x first, then divide by 3; the direction of the sign changes only for division by a negative number. Working: adding 1 to both sides of 3x − 1 ≤ 11 gives 3x ≤ 12; dividing both sides by 3, which is positive, gives x ≤ 4. Answer: x ≤ 4. The distractors: x ≥ 4 comes from turning the sign round while dividing by 3; x ≤ 10/3 comes from subtracting 1 from both sides instead of adding it, giving 3x ≤ 10; x ≤ 12 comes from stopping at 3x ≤ 12 and reading off the 12 without dividing by 3.
- (d) 66 — 6 and (4x + 3) are correct factors of 24x + 18. — Substituting x=2 into 24x+18: 24×2+18=48+18=66. Checking the factorisation: 6×4x=24x and 6×3=18, so 6(4x+3)=24x+18, matching the original expression — 6 and (4x+3) are correctly identified as factors. A candidate who substitutes x=2 into (4x+3) but forgets to multiply by the factor 6 afterwards would compute just 4×2+3=11. A candidate who adds 24 and 18 together before multiplying by x, instead of multiplying 24 by x first, would compute (24+18)×2=84. A candidate who distributes the 6 over only the first term inside the brackets, forgetting the second, would check the factorisation as 6×4x=24x but leave the 3 unmultiplied, getting 24x+3 instead of 24x+18 — and would wrongly conclude that 6 and (4x+3) are not correct factors.
- (a) Underestimate: the chord lies below the curve — For a curve that is concave down (bending downward), the straight line joining any two points on the curve lies BELOW the curve. The trapezium's top edge is this straight line, so the trapezium's area is smaller than the true area under the curve — the trapezium rule UNDERESTIMATES the distance in this case. This is because a curve whose gradient keeps decreasing bends away from any chord joining two of its points, dropping the chord below every point of the curve in between. The reverse, a chord lying above the curve, is the rule for a concave-up curve, not this one — check which way the curve bends before deciding. The trapezium rule does not always overestimate or underestimate, and it is not exact except when the graph really is a straight line.
- (a) An identity, because it is true for every value of x — Expanding the brackets multiplies both terms inside by 4, giving 4x + 12, which is exactly the right-hand side. The two sides are therefore equal whatever x is, and a statement true for every value of the letter is an identity. An equation is true only for particular values, and trying to solve this one leads to 0 = 0, which places no restriction on x at all. Being able to expand brackets is not what makes a statement an identity, since any equation with brackets can be expanded. Nor is it a formula: a formula links two different quantities, and only one letter appears here.
- (c) x = 0, y = 3 and x = 3, y = 0 — Substitute y = 3 − x into x² + y² = 9: x² + (3 − x)² = 9. Expanding (3 − x)² = 9 − 6x + x² gives x² + 9 − 6x + x² = 9, which simplifies to 2x² − 6x = 0, or 2x(x − 3) = 0, so x = 0 or x = 3. Using y = 3 − x: x = 0 gives y = 3; x = 3 gives y = 0. Distractor routes: x = 0, y = 3 alone stops after the factor 2x = 0 and never checks the second factor, x − 3 = 0. x = 0, y = 3 and x = −3, y = 6 comes from factorising 2x² − 6x as 2x(x + 3), a sign error that gives a second root of −3 instead of 3. x = 0, y = 3 and x = 6, y = −3 comes from expanding (3 − x)² as 9 − 6x, dropping the x² term, which changes the quadratic to x² − 6x = 0 and its second root to 6.
- (c) x = 3, y = 1 — Method: the y terms are +y and −y, so adding the two equations removes y and leaves an equation in x alone. Working: adding 2x + y = 7 and x − y = 2 gives 3x = 9, so x = 3; substituting x = 3 into x − y = 2 gives 3 − y = 2, so y = 1. Answer: x = 3, y = 1, which also satisfies 2 × 3 + 1 = 7. The distractors: x = 1, y = 3 comes from finding the two values correctly and then writing them against the wrong letters; x = 3, y = 2 comes from substituting x = 3 into 2x + y = 7 as 2 + 3 + y = 7, adding the coefficient instead of multiplying by it; x = 3, y = −1 comes from substituting into x − y = 2 as though it read x + y = 2.
- (c) It has two different real solutions — Method: the discriminant is the quantity under the square root sign in the quadratic formula, so its sign decides how many real values the formula produces. Working: when the discriminant is positive its square root is a real number that is not zero, and the formula adds that root and subtracts it in turn, so the two results are different; a positive discriminant that is not a perfect square still gives two solutions, but they are not whole numbers. Answer: it has two different real solutions. The distractors: one repeated real solution is what a discriminant of zero gives, because adding and subtracting zero changes nothing; no real solutions is what a negative discriminant gives, because a negative number has no real square root; two whole-number solutions happens only when the discriminant is a perfect square and the division works out exactly, which a positive discriminant does not guarantee.
- (a) 1.861 — x₁ = ∛(10 − 2²) = ∛6 = 1.817120593. x₂ = ∛(10 − 1.817120593²) = ∛6.698072751 = 1.885022855. x₃ = ∛(10 − 1.885022855²) = ∛6.446688837 = 1.861139399, which rounds to 1.861. Reporting x₂ instead of x₃ gives 1.885022855, which rounds to 1.885. Stopping after the first iteration and reporting x₁ instead of x₃ gives 1.817120593, which rounds to 1.817. A sign error inside the cube root, using xₙ₊₁ = ∛(10 + xₙ²) instead of ∛(10 − xₙ²), gives x₁ = ∛14 = 2.410142264, x₂ = ∛(10 + 2.410142264²) = 2.509763724, and x₃ = ∛(10 + 2.509763724²) = 2.535437381, which rounds to 2.535.
- (a) 18 — The common ratio is 2√3 ÷ 2 = √3. Checking: 6 ÷ 2√3 = √3 and 6√3 ÷ 6 = √3, so the ratio is consistent throughout. The next term is 6√3 × √3 = 6 × 3 = 18, since √3 × √3 = 3. Looking only at the coefficients 2, 2, 6, 6 and continuing them by doubling the last one gives 6 × 2 = 12, which is wrong because the step from each term to the next is a multiplication by √3, not a pattern in the coefficients alone. Doubling the previous term instead of multiplying by the surd ratio √3 gives 6√3 × 2 = 12√3, which is wrong because the common ratio is √3, not 2. Using 3 instead of √3 as the common ratio — squaring the true ratio by mistake — gives 6√3 × 3 = 18√3, which is wrong because 3 is the SQUARE of the common ratio, not the ratio itself.
Build your own mix at the worksheet builder.