Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (b) 5 and −6 — Method: turn the sentence into an equation in one letter, collect every term on one side so it reads as a quadratic equal to zero, then factorise. Working: if the number is x then x² + x = 30, which rearranges to x² + x − 30 = 0; two numbers that multiply to −30 and add to 1 are 6 and −5, so (x + 6)(x − 5) = 0 and x = −6 or x = 5. Both values work: 5 + 25 = 30 and −6 + 36 = 30. Answer: 5 and −6. The distractors: 6 and −5 comes from reading the numbers inside the brackets as the solutions without changing their signs; 5 only comes from discarding the negative solution, although nothing in the question rules out a negative number; 5 and 6 comes from hunting for a factor pair of 30 instead of forming and solving the quadratic.
- (b) 0.458 — x₁ = (0.4² + 3) ÷ 7 = 3.16 ÷ 7 = 0.4514 (unrounded, 0.451428...). x₂ = (x₁² + 3) ÷ 7 = (0.2038 + 3) ÷ 7 = 3.2038 ÷ 7 = 0.458 (3 d.p.). Choosing 0.632 divides only the 3 by 7 instead of dividing the whole sum x₁² + 3 by 7. Choosing 0.451 repeats the calculation for x₁ instead of moving on to x₂. Choosing 0.493 uses x₁ itself instead of x₁² inside the formula.
- (d) x = 0, y = −1 and x = 3, y = 5 — Set the two expressions for y equal: 2x − 1 = x² − x − 1. Rearranging, subtracting 2x and adding 1 to both sides: 0 = x² − x − 1 − 2x + 1 = x² − 3x, so x² − 3x = 0. Factorise: x(x − 3) = 0, giving x = 0 or x = 3. Using y = 2x − 1: x = 0 gives y = −1; x = 3 gives y = 5. Distractor routes: x = 0, y = −1 alone stops after the factor x = 0 and never checks the second factor, x − 3 = 0. x = 0, y = −1 and x = −3, y = −7 comes from mis-factorising x² − 3x as x(x + 3), a sign error that gives a second root of −3 instead of 3. x = −2, y = −5 and x = 1, y = 1 comes from adding 2x to both sides instead of subtracting it when rearranging, giving x² + x − 2 = 0 instead of x² − 3x = 0.
- (d) $y = x^2 + 3$ — Method: a point lies on a curve only if substituting its x-coordinate into the equation gives back its y-coordinate, so read one or two points off curve B and test each equation. Working: curve B crosses the y-axis at (0, 3), and its lowest point is also (0, 3); substituting x = 0 into y = x² + 3 gives 0² + 3 = 3, which matches. Checking a second point: at x = 2 curve B is at y = 7, and 2² + 3 = 4 + 3 = 7, which matches as well. Answer: curve B has equation y = x² + 3. Distractor refutation: y = x² − 3 comes from reading the 3 as a move down instead of a move up; substituting x = 0 gives −3, so that curve would cross the y-axis three squares below the origin, while curve B crosses it three squares above. y = (x − 3)² comes from putting the 3 inside the brackets; substituting x = 0 gives (−3)² = 9, and that curve's lowest point is at (3, 0), three squares to the right along the x-axis, whereas curve B has its lowest point on the y-axis. y = x² + 3x comes from attaching the 3 to the x term instead of writing it on its own; substituting x = 0 gives 0² + 3 × 0 = 0, so that curve passes through the origin, and curve B does not pass through the origin.
- (c) (2, 5) — Reflecting in the x-axis keeps the x-coordinate the same and changes the sign of the y-coordinate: Q = (2, 5). (−2, −5) comes from reflecting in the y-axis instead, which changes the sign of the x-coordinate. (−2, 5) comes from reflecting in both axes. (2, −5) comes from not applying the reflection at all.
- (a) x = 4, y = −3 — Method: both equations contain +y with the same coefficient, so subtracting one equation from the other removes y. Working: (2x + y) − (x + y) = 5 − 1 gives x = 4; substituting x = 4 into x + y = 1 gives 4 + y = 1, so y = −3. Answer: x = 4, y = −3, which also satisfies 8 − 3 = 5. The distractors: x = 4, y = 5 comes from rearranging x + y = 1 as y = 1 + x; x = −2, y = 3 comes from eliminating x by doubling the first equation and then reading −y = 3 as y = 3; x = 6, y = −5 comes from adding the constants instead of subtracting them while eliminating y, taking x as 5 + 1.
- (c) Wrong — the correct equation is x² − 5x + 4 = 0. — Rearranging x − 2 = x² − 4x + 2 by moving every term across: 0 = x² − 4x + 2 − x + 2 = x² − 5x + 4. The candidate's x-term is wrong: combining −4x with the moved −x gives −4x − x = −5x, not −3x. So the correct equation is x² − 5x + 4 = 0. Distractor routes: "x² − 3x + 4 = 0 is correct" simply agrees with the candidate's sign error without checking it. "It should be x² − 5x − 4 = 0" correctly spots that something is wrong but blames the wrong term — the constant, 2 + 2 = 4, is correct; the error is in the x-term. "Subtracting is the same as adding" states something false: subtracting a term and adding it give different signs.
- (b) 3 — At the limit, L = √(2L + 3). Squaring both sides: L² = 2L + 3, so L² − 2L − 3 = 0, which factorises as (L − 3)(L + 1) = 0, giving L = 3 or L = −1. Since the sequence of iterates stays positive throughout, the limit is L = 3. Taking the other, negative root without rejecting it gives −1. Treating the equation L = 2L + 3 as already linear, forgetting to square both sides first, gives −L = 3, so L = −3. A sign error when factorising, writing (L + 3)(L − 1) = 0 instead of (L − 3)(L + 1) = 0, gives L = 1.
- (d) 45 — v = s ÷ t = 180 ÷ 4 = 45 km/h. 720 comes from multiplying s and t instead of dividing, 180 × 4. 184 comes from adding s and t instead of dividing, 180 + 4. 176 comes from subtracting t from s instead of dividing, 180 − 4.
- (c) 10 m/s — A symmetric chord gradient uses the two points either side of t = 3: (2, 40) and (4, 60). The gradient is the change in height divided by the change in time: (60 − 40) ÷ (4 − 2) = 20 ÷ 2 = 10 m/s. Using only the values either side of one gap, (2, 40) and (3, 54), instead of the full symmetric chord, gives (54 − 40) ÷ (3 − 2) = 14 m/s. Getting the correct number but dropping the time unit, leaving only metres, gives 10 m. Dividing time by height instead of height by time inverts the calculation to (4 − 2) ÷ (60 − 40) = 0.1 s/m.
- (c) x = 2 or x = 3 — Method: factorise into two brackets whose numbers multiply to the constant term and add to the coefficient of x, then set each bracket equal to zero. Working: two numbers that multiply to 6 and add to −5 are −2 and −3, so x² − 5x + 6 = (x − 2)(x − 3) = 0; then x − 2 = 0 gives x = 2 and x − 3 = 0 gives x = 3. Answer: x = 2 or x = 3. The distractors: x = −2 or x = −3 comes from reading the numbers inside the brackets as the solutions instead of changing their signs; x = 1 or x = 6 comes from taking the first factor pair of 6 without checking that the pair adds to −5; x = 5 or x = 6 comes from reading the solutions straight off the 5 and the 6 in the equation.
- (a) y = 2ˣ + 3 — A translation of 3 units in the positive y-direction shifts the whole graph up, which means adding to the output: y = f(x) + k with k = 3, so the image is y = 2ˣ + 3. Adding the 3 inside the power instead of outside it, which translates the graph horizontally instead of vertically, gives y = 2ˣ⁺³. Using a negative 3, which moves the graph down instead of up, gives y = 2ˣ − 3. Mistaking 2ˣ for the linear expression 2x and adding 3 inside brackets gives y = 2(x + 3).
- (c) 6,400 — 9 hours contains 9 ÷ 3 = 3 whole periods of doubling, so the population is 800 × 2³. Since 2³ = 8, the population after 9 hours is 800 × 8 = 6,400. Adding 100% growth three times instead of compounding it — treating the growth as simple, not repeated doubling — gives 800 × 4 = 3,200, which is wrong because each period doubles the CURRENT population, not the original one. Using 9 as the power instead of dividing by the 3-hour period first gives 800 × 2⁹ = 409,600, which is wrong because the exponent counts periods, not hours. Giving the growth factor 2³ = 8 on its own, without multiplying by the starting population 800, leaves the answer as 8, which is wrong because the question asks for the population, not the multiplier. Always check that your final number of periods matches the total time divided by the period length.
- (b) k = 6 — Method: two simultaneous linear equations have no solution when the lines they describe are parallel, so write each equation in the form y = mx + c and make the gradients equal. Working: kx + 2y = 4 rearranges to y = −(k/2)x + 2, so its gradient is −k/2, and 3x + y = 5 rearranges to y = −3x + 5, so its gradient is −3; setting −k/2 = −3 gives k = 6, and the first equation is then 6x + 2y = 4, which simplifies to 3x + y = 2 and can never agree with 3x + y = 5. Answer: k = 6. The distractors: k = −6 comes from reading the gradient of kx + 2y = 4 as +k/2 and solving k/2 = −3; k = 3 comes from making the x terms identical instead of making the gradients equal; k = 2/3 comes from writing the gradient of 3x + y = 5 upside down as −1/3 and solving −k/2 = −1/3.
- (a) y = −2x − 1 — Method: the gradient is the change in y divided by the change in x with both differences taken in the same order, and the constant then comes from substituting either point into y = mx + c. Working: m = (−9 − 3) ÷ (4 − (−2)) = (−12) ÷ 6 = −2, so the line is y = −2x + c; substituting (−2, 3) gives 3 = −2 × (−2) + c = 4 + c, so c = 3 − 4 = −1. Answer: y = −2x − 1. The distractors: y = −2x + 1 comes from rearranging 3 = 4 + c the wrong way round and taking the constant as 4 − 3; y = 2x + 7 comes from losing the minus sign when −12 is divided by 6 and then substituting correctly, 3 = 2 × (−2) + c; y = −(1/2)x + 2 comes from writing the gradient upside down as the change in x over the change in y, 6 ÷ (−12).
Build your own mix at the worksheet builder.