Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (a) s/f — Sharing s sweets equally between f friends means dividing the total by the number of friends, written as a fraction: s/f. Writing f/s divides the wrong way round, sharing the number of friends between the sweets instead of the sweets between the friends. Writing s − f mistakes sharing for taking away, subtracting the number of friends from the number of sweets. Writing sf multiplies the two quantities together, which would make the total larger rather than splitting it into smaller equal parts. The number of sweets each friend receives is s/f.
- (a) It is 2(w + (w + 3)) = 4w + 6, not 2w + 3. — The perimeter of a rectangle is twice the width plus twice the length: 2 × w + 2 × (w + 3) = 2w + 2w + 6 = 4w + 6, so the gardener's 2w + 3 is wrong. Writing w + (w + 3) = 2w + 3 forgets to double the sides at all, only adding one width and one length once. Writing 4(w + 3) = 4w + 12 wrongly treats all four sides as equal to the length, as if the garden were a square. Writing 3w + 6 comes from doubling the length correctly but adding the width only once instead of doubling it too.
- (c) 4 — x² + 12x + 40 = (x + 6)² − 6² + 40 = (x + 6)² + 4, so a = 6 and b = 4. Since (x + 6)² can never be negative, y = (x + 6)² + 4 is smallest when the bracket is zero, so the minimum value of y is 4. Giving 40 instead reads off the ORIGINAL constant term and ignores the completing-the-square step entirely — wrong, because 40 is the value of y when x = 0, not the minimum value. Giving −6 instead answers with the x-coordinate of the turning point (where the bracket is zero) rather than the minimum y-value itself — wrong, because the question asks for the minimum value of y, not the value of x that produces it. Giving 36 instead stops after squaring half the coefficient, 6² = 36, without combining it with the 40 already in the expression — wrong, because the minimum value is 40 minus 36, not 36 on its own.
- (a) 4.897 — Method: substitute the starting value into the right-hand side of the formula to get x₁, then feed each new value back in, keeping the whole calculator display every time and rounding only at the very end. Working: x₁ = √(5 × 2 + 2) = √12 = 3.46410…; x₂ = √(5 × 3.46410… + 2) = √19.32050… = 4.39551…; x₃ = √(5 × 4.39551… + 2) = √23.97755… = 4.89668…, which is 4.897 correct to 3 decimal places. Answer: 4.897. The distractors: 4.396 is x₂, written down by a candidate who counts the starting value x₀ as the first iterate and so stops one use of the formula early; 3.464 is x₁, the value after using the formula only once; 5.146 is x₄, one use of the formula too many — the mirror image of the first slip, made by a candidate who labels the first value worked out as x₀ rather than as x₁ and so runs the count a step long.
- (b) −5 — Method: a point whose x-coordinate is 0 lies on the y-axis, so its y-coordinate is the constant c; once m and c are both known the equation can be written down and x substituted into it. Working: the line passes through (0, 1), so c = 1 and the equation is y = −3x + 1; substituting x = 2 gives y = −3 × 2 + 1 = −6 + 1 = −5. Answer: −5. The distractors: 7 comes from ignoring the minus sign on the gradient and working out 3 × 2 + 1; 5 comes from working out 3 × 2 = 6 and then using the minus sign to take the constant off the product, 6 − 1 = 5; −7 comes from subtracting the constant instead of adding it, −6 − 1 = −7.
- (d) Yes, because 3² + 4² = 25. — A point lies on the circle x² + y² = 25 exactly when substituting its coordinates makes the equation true. Squaring each coordinate separately and adding: 3² + 4² = 9 + 16 = 25, which matches the right-hand side, so (3, 4) does lie on the circle. Adding the coordinates without squaring them, 3 + 4 = 7, and then reasoning that 7 is less than 25 happens to reach the same verdict, but it is not testing the equation of the circle at all — the circle equation depends on x² + y², not x + y. Squaring the sum instead of summing the squares, (3 + 4)² = 49, not 25, wrongly rules the point out. Doubling each coordinate instead of squaring it, so that 4² is taken as 8, gives 9 + 8 = 17, not 25, which also wrongly rules the point out.
- (a) x = (y + 9) / 2 — Method: undo the subtraction of 9 first, then undo the multiplication by 2. Working: y = 2x − 9, so adding 9 to both sides gives y + 9 = 2x, then dividing both sides by 2 gives x = (y + 9) / 2. The value x = (y − 9) / 2 comes from a sign error, keeping the −9 instead of moving it to +9. The value x = 2(y + 9) comes from multiplying by 2 instead of dividing. The value x = y / 2 + 9 comes from dividing by 2 before adding 9, the wrong order of operations, instead of dividing the whole bracket.
- (b) 4.39 — x₁ = ∛(150 − 3 × 4²) = ∛(150 − 48) = ∛102 = 4.672 (unrounded). x₂ = ∛(150 − 3 × 4.672²) = ∛(150 − 65.49) = ∛84.51 = 4.39 (2 d.p.). Choosing 4.67 stops after only one iteration, giving x₁ instead of x₂. Choosing 84.51 finds the value inside the cube root for x₂ but never takes the cube root. Choosing 6.32 comes from adding 3xₙ² instead of subtracting it inside the root, which does not match the given formula.
- (d) 3 — 2x² − 12x + 7 rewrites as 2(x² − 6x) + 7, then as 2[(x − 3)² − 9] + 7, which simplifies to 2(x − 3)² − 11, since −2 × 9 + 7 = −11. The bracket (x − 3)² is zero when x = 3, so the minimum occurs at x = 3. Treating the shift as b/a instead of b/(2a) — using 6 instead of 3 — gives x = 6, which is wrong. Reading the bracket's sign directly without negating it gives x = −3, wrong, because (x − 3)² is zero at x = 3, not x = −3. Reading off the coefficient of x itself, −12, and calling that the answer skips the completing-the-square process entirely and gives x = −12, which is wrong because b is not the turning point's x-coordinate under any circumstance. Always check: substituting your value of x should make the bracketed term equal to zero, and nothing else.
- (a) 8 — f(x − 1) means every input to f is reduced by 1 before it is looked up. At x = 2, the input to f becomes 2 − 1 = 1, so f(x − 1) at x = 2 is f(1) = 8. Reading f(2) = 4 directly from the table, without applying the shift, gives 4. Shifting in the wrong direction, using x + 1 = 3 instead of x − 1 = 1, gives f(3) = 1. Confusing f(x − 1) with f(x) − 1 — taking f(2) = 4 and then subtracting 1 — gives 3.
- (c) y = 2x + 1 — Method: the gradient of the line through two points is the change in y divided by the change in x, and the constant is then found by substituting one of the points into y = mx + c. Working: m = (5 − 3) ÷ (2 − 1) = 2 ÷ 1 = 2, so the line is y = 2x + c; substituting x = 1 and y = 3 gives 3 = 2 × 1 + c, so c = 3 − 2 = 1. Answer: y = 2x + 1. The distractors: y = x + 2 comes from taking the gradient as the change in x, 2 − 1 = 1, and then substituting (1, 3) to reach a constant of 2; y = 2x − 1 comes from working out the constant as mx − y, 2 × 1 − 3 = −1, instead of y − mx; y = 2x + 3 comes from using the y-coordinate of (1, 3) as the constant without substituting at all.
- (a) Outside: OQ² = 221 > r² = 169 — OQ² = 10² + 11² = 100 + 121 = 221. Comparing this with r² = 169: since 221 > 169, OQ > r, so Q lies outside the circle — this is the correct verdict AND the correct working. 'Outside: OQ = 21 (10 + 11) > r = 13' reaches the same Outside verdict, but by invalid working: it adds the coordinates instead of squaring them (10 + 11 = 21, rather than 10² + 11² = 221), so the stated 'OQ' of 21 is not a distance at all — the verdict happens to match, but the method is wrong. 'Inside: OQ ≈ 14.87 < r² = 169' correctly finds the distance OQ = √221 ≈ 14.87, but then compares that DISTANCE with r² = 169 instead of with r = 13 — comparing two different kinds of quantity gives a meaningless, and here wrong, verdict. 'Inside: OQ² = 221 < (2r)² = 676' confuses the radius with the diameter: it compares OQ² with the diameter squared, (2 × 13)² = 676, instead of with r² = 169.
- (a) y = −2x + 7 — Using y = −2x + c, and substituting the point (3, 1): 1 = −2(3) + c, so 1 = −6 + c, and c = 7, giving y = −2x + 7. A candidate who uses the y-coordinate of the point directly as the y-intercept, instead of solving for c, would write y = −2x + 1. A candidate who drops the negative sign on the gradient would write y = 2x + 7. A candidate who makes a sign error when isolating c, writing c = 1 − 6 = −5 instead of c = 1 + 6 = 7, would write y = −2x − 5.
- (d) x² − 6x + 9 — Method: squaring a bracket means multiplying that bracket by itself, so expand (x − 3)(x − 3) term by term and then collect like terms. Working: x × x = x², x × (−3) = −3x, (−3) × x = −3x and (−3) × (−3) = 9, giving x² − 3x − 3x + 9, and the two middle terms collect to −6x. Answer: x² − 6x + 9. The distractors: x² − 3x + 9 comes from writing down only one of the two middle products instead of both; x² + 6x + 9 comes from treating (−3) × x as +3x, so the middle terms are added rather than subtracted; x² − 9 comes from treating the square as the difference of two squares (x − 3)(x + 3).
- (a) Yes — the gradients multiply to −2 × 1/2 = −1. — Rearrange Q into the form y = mx + c: 2y = x + 6 gives y = (1/2)x + 3, so Q has gradient 1/2. P has gradient −2. Two lines are perpendicular exactly when the product of their gradients is −1: −2 × 1/2 = −1. Since this holds, P and Q are perpendicular. Distractor routes: "the product is −1, but perpendicular needs 1" works out the product correctly but misremembers the condition — the perpendicular test is a product of exactly −1, and parallel lines are spotted by their gradients being equal, not by a product of 1. "Q's gradient is 2, and −2 × 2 = −4" comes from reading the 2 in front of y in 2y = x + 6 as the gradient, instead of dividing the whole equation by 2 first to reach y = (1/2)x + 3, where the gradient is 1/2. "Both equations have a negative x-term" is not a valid test at all — P's equation does have a negative x-term, but Q's, once rearranged, does not, and matching signs say nothing about the actual gradients.
Build your own mix at the worksheet builder.