Printable · GCSE Higher · ages 14-16
Algebra worksheet — GCSE Higher
Fifteen questions across the algebra statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (a) 19 — Each time x increases by 1, y increases by 3 (4, 7, 10, 13 — a constant difference of 3). So at x = 4, y = 13 + 3 = 16, and at x = 5, y = 16 + 3 = 19. A candidate who stops one step early, giving the value for x = 4 instead of x = 5, answers 16. A candidate who overcounts and adds three steps of 3 instead of two from x = 3 gets 13 + 9 = 22. A candidate who mistakes the y-intercept (4) for the common difference and adds 4 twice from x = 3 gets 13 + 8 = 21.
- (c) x ≥ 3 — Method: collect the number terms first; the x term is negative, so the final step multiplies both sides by −1, and that is the one step that turns the inequality sign round. Working: subtracting 5 from both sides of 5 − x ≤ 2 gives −x ≤ −3; multiplying both sides by −1 turns −x into x and −3 into 3, and because the multiplier is negative the ≤ becomes ≥, so x ≥ 3. Answer: x ≥ 3. The distractors: x ≤ 3 comes from multiplying by −1 without turning the sign round, the commonest slip on this type; x ≤ −3 comes from reading −x ≤ −3 as though the minus sign could simply be rubbed off the left-hand side; x ≥ −3 comes from turning the sign round correctly but leaving the right-hand side at −3 instead of multiplying it by −1 as well.
- (b) n² + 4n — First differences of 5, 12, 21, 32, 45 are 7, 9, 11, 13. Second differences are 2, 2, 2, so a = 2 ÷ 2 = 1. Subtracting n² (1, 4, 9, 16, 25) from the totals (5, 12, 21, 32, 45) leaves 4, 8, 12, 16, 20, the linear expression 4n. So the number of oranges is n² + 4n. Using the second difference itself as the coefficient of n², without halving it, gives 2n² + 4n. Finding a = 1 correctly but dropping the linear remainder 4n entirely leaves n². Treating the first first difference (7) as a constant common difference and building a linear formula 5 + 7(n − 1) = 7n − 2 fits only the first two totals, and gives 19 for n = 3 instead of 21.
- (a) −2 m/s² — The gradient of a line through two points is the change in the y-value divided by the change in the x-value: (6 − 22)/(16 − 8) = −16/8 = −2 m/s². The negative sign confirms the deceleration mentioned in the question. Writing 2 m/s² comes from subtracting the velocities in the wrong order, using (22 − 6) instead of (6 − 22), which loses the sign that shows the car is slowing down. Writing −0.5 m/s² comes from inverting the fraction, dividing the change in time by the change in velocity instead of the other way round. Writing −16 m/s² comes from finding the change in velocity, −16, but forgetting to divide by the change in time, 8 seconds.
- (d) −3 — Substitute y = 11 into y = 5 − 2x, giving 11 = 5 − 2x. Subtracting 5 from both sides gives 6 = −2x, so x = 6 ÷ (−2) = −3. A candidate who mishandles the negative sign when rearranging, treating the equation as 6 = 2x, gets x = 3. A candidate who correctly finds −2x = 6 but forgets to divide by 2 at all gets x = 6. A candidate who adds 5 and 11 instead of subtracting, getting 2x = 16, gets x = 8.
- (d) y = −2x + 10 — Method: a tangent is perpendicular to the radius drawn to the point where it touches, so work out the gradient of that radius, take its negative reciprocal for the tangent, then substitute into y − y₁ = m(x − x₁). Working: the radius joins (0, 0) to (4, 2), so its gradient is 2 ÷ 4 = 1/2; turning 1/2 upside down gives 2 and changing the sign gives −2. Substituting into y − 2 = −2(x − 4) gives y − 2 = −2x + 8, so y = −2x + 10. Answer: y = −2x + 10. The distractors: y = −0.5x + 4 changes the sign of the radius gradient but never turns it upside down, using −1/2 where −2 belongs; y = 2x − 6 turns the gradient upside down but leaves it positive, using 2 where −2 belongs; y = −2x − 10 has the correct gradient but substitutes the point with both signs reversed, writing y + 2 = −2(x + 4) instead of y − 2 = −2(x − 4).
- (a) −8 — −f(x) means take the output value from the table and change its sign, without changing which x-value is looked up. From the table, f(1) = 8, so −f(1) = −8. Reading f(1) = 8 from the table but forgetting to apply the negative sign gives 8. Misreading the row and using f(0) = 5 instead of f(1) = 8, then negating it, gives −5. Confusing −f(x) with f(x) − 1 — taking f(1) = 8 and subtracting 1 instead of negating — gives 7.
- (a) 6 — Subtracting the second equation from the first: the x-terms, 4x and 4x, cancel; the y-terms combine as 3y − (−y) = 4y; and the right-hand sides give 25 − 1 = 24. This gives 4y = 24, so y = 6. A candidate who subtracts in the wrong order would get 4y = 1 − 25 = −24, so y = −6. A candidate who forgets the sign on the −y term, treating 3y − y as 2y, would get 2y = 24, so y = 12. A candidate who divides 24 by 6 instead of 4 would get y = 4.
- (a) 9 — Method: the gaps in this sequence are not constant, so work out each of the two terms named from the rule and then subtract the earlier from the later. Working: the 5th term is 5² + 1 = 25 + 1 = 26 and the 4th term is 4² + 1 = 16 + 1 = 17, so the difference is 26 − 17. Answer: 9. The distractors: 7 comes from using the 3rd and 4th terms, one position too early, 17 − 10; 11 comes from using the 5th and 6th terms, one position too late, 37 − 26; 1 comes from subtracting the position numbers, 5 − 4, instead of the terms themselves.
- (a) (−6, −3) — Reflecting in the y-axis changes the sign of the x-coordinate and keeps the y-coordinate the same: (−6, −3). (6, 3) comes from reflecting in the x-axis instead, which changes the sign of the y-coordinate. (−6, 3) comes from reflecting in both axes. (6, −3) comes from not applying the reflection at all.
- (c) x = 0 or x = −7 — Factorising: x² + 7x = x(x + 7) = 0, so x = 0 or x + 7 = 0, giving x = 0 or x = −7. A candidate who divides both sides of the original equation by x, which loses the solution x = 0, gets only x = −7. A candidate who makes a sign error solving x + 7 = 0 gets x = 0 or x = 7. A candidate who misreads the coefficient and doubles it gets x = 0 or x = −14.
- (a) y = −2x − 1 — Method: the gradient is the change in y divided by the change in x with both differences taken in the same order, and the constant then comes from substituting either point into y = mx + c. Working: m = (−9 − 3) ÷ (4 − (−2)) = (−12) ÷ 6 = −2, so the line is y = −2x + c; substituting (−2, 3) gives 3 = −2 × (−2) + c = 4 + c, so c = 3 − 4 = −1. Answer: y = −2x − 1. The distractors: y = −2x + 1 comes from rearranging 3 = 4 + c the wrong way round and taking the constant as 4 − 3; y = 2x + 7 comes from losing the minus sign when −12 is divided by 6 and then substituting correctly, 3 = 2 × (−2) + c; y = −(1/2)x + 2 comes from writing the gradient upside down as the change in x over the change in y, 6 ÷ (−12).
- (d) −11/60 — The radius from the origin to (11, 60) has gradient 60/11. The tangent is perpendicular to this radius, so its gradient is the negative reciprocal: −1 ÷ (60/11) = −11/60. Choosing 60/11 uses the radius's gradient unchanged, without applying perpendicularity. Choosing −60/11 negates the radius's gradient but forgets to take its reciprocal. Choosing 11/60 takes the reciprocal correctly but keeps the gradient positive instead of negative.
- (c) 360° — The graph of y = cos x repeats itself every 360°, so its period is 360°. 180° is the period of y = tan x, not y = cos x — confusing the two graphs gives this. 90° is the horizontal distance from a maximum of y = cos x to the next point where the graph crosses the x-axis, a quarter of the period, mistaken for the whole period. 720° comes from counting the interval containing two full repeats of the graph, from one maximum to the second repeat of that maximum, instead of the first.
- (d) Reflect in the y-axis, +2 in x; roots 3, −2 — f(2 − x) is zero exactly when 2 − x equals one of f's roots: 2 − x = −1 or 2 − x = 4. Solving each correctly (x = 2 − (−1) = 3, and x = 2 − 4 = −2) gives the new roots x = 3 and x = −2. This is the same as reflecting y = f(x) in the y-axis to get f(−x), then translating 2 units in the positive x-direction to get f(−(x − 2)) = f(2 − x). Solving 2 − x = k as x = k − 2 instead of x = 2 − k is a sign slip when rearranging, and gives x = −3 and x = 2. Translating +2 in x with no reflection at all uses f(x − 2), whose roots are the original roots plus 2: x = 1 and x = 6 — this misses the reflection completely. Assuming 'no overall change' wrongly treats a reflection-and-translation pair as always cancelling out, when here the roots genuinely move, from x = −1 and x = 4 to x = 3 and x = −2.
Build your own mix at the worksheet builder.