Printable · GCSE Higher · ages 14-16
Geometry and measures worksheet — GCSE Higher
Fifteen questions across the geometry and measures statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Calculator
Geometry and measures worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.In triangle ABC, AB = 9.4 cm, AC = 7.2 cm and angle BAC = 63°, the angle between them. Work out the area of triangle ABC. Give your answer to 1 decimal place.
- 2.A scale drawing shows a room that is 5 cm wide. The real room is 15 m wide. Write the scale of the drawing in the form 1 : n.
- 3.A cuboid-shaped shipping crate has a length of 12 m, a width of 5 m, and a volume of 360 m³. Work out the height of the crate, in metres.
- 4.A garden water trough is a prism whose cross-section is a right-angled triangle with base 40 cm and height 30 cm. The trough is 120 cm long. Work out the volume of water needed to fill the trough completely.
- 5.A goat is tied by a rope 7 m long to a post at a corner of a rectangular field, where two fences meet at a right angle. The goat can reach anywhere inside the field that the rope allows. Using π = 3.14, work out the area the goat can graze, to the nearest square metre.
- 6.A student is asked to rearrange the cosine rule a² = b² + c² − 2bc cos A to make cos A the subject. They write: cos A = (a² − b² − c²) / (2bc). Is the student's rearrangement correct?
- 7.A sailmaker cuts two triangular sail panels from a pattern. Panel X has a 10 m side, with angles of 50° and 75° at its two ends. Panel Y also has a 10 m side, with angles of 50° and 75° at its two ends, in the same arrangement. The sailmaker wants to check the panels will match exactly, without cutting a third measurement. Which condition proves the two panels are congruent?
- 8.The area of triangle ABC is 42 cm². AB = 9.5 cm and angle BAC = 61°. Work out the length of AC. Give your answer to 1 decimal place.
- 9.In triangle ABC, AB = 12 cm, AC = 7 cm and the area of the triangle is 33 cm². Given that angle BAC is obtuse, work out the size of angle BAC. Give your answer to 1 decimal place.
- 10.A sector of a circle has radius 6 cm and an arc length of 15.7 cm. Using π = 3.14, work out the angle of the sector.
- 11.A plumber charges a £45 call-out fee, plus £28 for each hour worked. She works on a job for 3 hours 30 minutes, and her hours are billed by rounding up to the next whole hour. Work out the total amount she charges.
- 12.A circle has centre O and radius 10 cm. Points A and B lie on the circle such that angle AOB = 130°. Work out the area of the minor segment cut off by the chord AB. Give your answer to 1 decimal place.
- 13.In triangle ABC, angle ABC = 90° and angle BAC = 30°. The hypotenuse AC = 12 cm. Work out the exact length of AB.
- 14.Triangle 1 has sides of 10 cm and 13 cm with an angle of 64° between them. Triangle 2 has sides of 11 cm and 12 cm with an angle of 70° between them. Which triangle has the greater area, and by how much? Give your answer to 1 decimal place.
- 15.The top of a clock tower is 25 m above level ground. Oliver stands on the ground 25 m from the foot of the tower. Work out the angle of elevation of the top of the tower from the point where Oliver stands.
Answer key
- (d) 30.2 cm² — Method: with two sides and the angle between them, use Area = (1/2)ab sin C. Working: Area = 1/2 × 9.4 × 7.2 × sin 63° = 30.2 cm² (1 d.p.). Answer: 30.2 cm². Leaving out the 1/2 altogether gives 60.3 cm²; using cos 63° instead of sin 63° gives 15.4 cm²; and squaring one side instead of multiplying the two different given sides together gives 39.4 cm². Always check you are using sin, not cos, and that the 1/2 is there before you multiply the two given sides together.
- (c) 1 : 300 — First convert both lengths to the same unit: 15 m = 1500 cm. The scale compares 5 cm on the drawing to 1500 cm in real life, so dividing both parts by 5 gives a scale of 1 : 300. A candidate who compares 5 to 15 without converting units gets 1 : 3. A candidate who converts 15 m to 150 cm, using the wrong conversion factor, gets 1 : 30. A candidate who converts 15 m to 15000 cm, again using the wrong conversion factor, gets 1 : 3000. The scale of the drawing is 1 : 300.
- (b) 6 m — Volume of a cuboid = length × width × height, so height = volume ÷ (length × width) = 360 ÷ (12 × 5) = 360 ÷ 60 = 6 m. A pupil who divides the volume by the length only gets 360 ÷ 12 = 30 m. A pupil who divides the volume by the width only gets 360 ÷ 5 = 72 m. A pupil who subtracts length × width from the volume instead of dividing gets 360 − 60 = 300 m. The correct height is 6 m.
- (b) 72 000 cm³ — Cross-sectional area = 1/2 × 40 × 30 = 600 cm². Volume = cross-sectional area × length = 600 × 120 = 72 000 cm³. (144 000 cm³ comes from forgetting the 1/2 in the triangle's area, using 40 × 30 as the cross-section; 36 000 cm³ comes from halving the correct volume again, as if the 1/2 applied a second time; 720 cm³ comes from adding the cross-sectional area and the length, 600 + 120, instead of multiplying them.)
- (d) 38 m² — The two fences meet at a right angle, so the rope sweeps a quarter of a circle: 90 ÷ 360 = 1/4. Grazing area = (90 ÷ 360) × 3.14 × 7² = 0.25 × 153.86 = 38.465 m², which rounds to 38 m². (5 m² comes from forgetting to square the rope length; 154 m² comes from finding the area of a full circle and forgetting the angle fraction; 11 m² comes from using the arc length formula instead of the sector area formula.)
- (b) No — should divide by −2bc, not +2bc; sign is wrong. — Method: rearrange a² = b² + c² − 2bc cos A step by step and compare with the student's version. Working: subtracting b² + c² from both sides gives a² − b² − c² = −2bc cos A, then dividing both sides by −2bc gives cos A = (a² − b² − c²) / (−2bc), which is the same as cos A = (b² + c² − a²) / (2bc). The student divided by +2bc instead of −2bc, so their expression is the negative of the correct one — the verdict is No. Saying the algebra is fine because 'either sign order gives a valid result' ignores that only one of the two signed expressions matches the original equation. Saying the denominator should be bc rather than 2bc is a different, unrelated error — the coefficient 2bc in the original formula is correct and must stay.
- (c) ASA — Method: check which condition matches two angles and the side between them, since that is all the sailmaker has measured. Working: the 10 m side lies between the 50° and 75° angles in both panels, so this is two Angles and the included Side, ASA. Options: SAS would need two sides and the angle between them, but only one side has been measured here; SSS would need three sides, but only one is known; RHS needs a right angle and a hypotenuse, and neither panel has a stated right angle. Answer: ASA.
- (a) 10.1 cm — Method: the area formula 1/2 × a × b × sin C contains the unknown side, so substitute what is known and rearrange. Working: 42 = 1/2 × 9.5 × AC × sin 61°. Multiplying both sides by 2 gives 84 = 9.5 × AC × sin 61°, and 9.5 × sin 61° = 9.5 × 0.87462 = 8.3089, so AC = 84 ÷ 8.3089 = 10.1096. Answer: AC = 10.1 cm to 1 decimal place. The distractors: 5.1 cm comes from forgetting to double the area when clearing the factor 1/2 and working out 42 ÷ 8.3089; 18.2 cm comes from using cos 61° in place of sin 61° in the denominator; 7.7 cm comes from multiplying by sin 61° instead of dividing by it, 84 × sin 61° ÷ 9.5, the standard slip when the unknown is inside a product.
- (b) 128.2° — Method: rearrange the area formula for the sine of the enclosed angle, then remember that the inverse sine key returns only the acute angle, so the obtuse angle must be found by subtracting from 180°. Working: 33 = 1/2 × 12 × 7 × sin BAC, so sin BAC = 2 × 33 ÷ (12 × 7) = 66 ÷ 84 = 0.78571. The inverse sine of 0.78571 is 51.787°, and the obtuse angle with the same sine is 180° − 51.787° = 128.213°. Answer: angle BAC = 128.2° to 1 decimal place. The distractors: 51.8° is the acute angle straight off the calculator, given by a candidate who never acts on the instruction that the angle is obtuse; 38.2° comes from pressing the inverse cosine key on 0.78571 instead of the inverse sine key; 156.9° comes from forgetting to double the area, so that sin BAC is taken as 33 ÷ 84 = 0.39286, and then subtracting the resulting 23.1° from 180°.
- (a) 150° — The arc length is the same fraction of the circumference as the angle is of 360°. The full circumference is 2 × 3.14 × 6 = 37.68 cm, so the angle is 15.7 ÷ 37.68 × 360 = 150°. Treating the 6 cm as a diameter instead of a radius gives a circumference of 18.84 cm and an angle of 300°. Using π = 3 instead of the given 3.14 gives a circumference of 36 cm and an angle of 157°. Treating the fraction 15.7 ÷ 37.68 as being out of 100 rather than 360 gives about 42°.
- (b) £157 — Method: round the hours worked up to the next whole hour, multiply by the hourly rate, then add the call-out fee. Working: 3 hours 30 minutes rounds up to 4 hours; 28 × 4 = 112; 112 + 45 = 157. Answer: £157. A candidate who uses the unrounded time of 3.5 hours, working out 28 × 3.5 = 98 and adding 45, gets £143. A candidate who forgets the call-out fee, giving only 28 × 4, gets £112. A candidate who rounds down to 3 hours instead of up, working out 28 × 3 = 84 and adding 45, gets £129.
- (b) 75.1 cm² — Method: a segment is a sector with its triangle cut away, so find the sector area and the triangle area (using Area = (1/2)r² sin C on the two radii) and subtract. Working: sector area = (130 ÷ 360) × π × 10² = 113.4 cm² (1 d.p.); triangle area = 1/2 × 10 × 10 × sin 130° = 38.3 cm² (1 d.p.); segment area = 113.4 − 38.3 = 75.1 cm². Answer: 75.1 cm². Reporting the sector area on its own, without subtracting the triangle, gives 113.4 cm²; reporting the triangle area on its own gives 38.3 cm²; and using the reflex angle, 360° − 130° = 230°, in the sector but still subtracting the triangle gives 162.4 cm², which is neither segment — the major segment would be the 230° sector PLUS the triangle, 239.0 cm². The minor segment is the smaller piece, cut off by the shorter arc, so use the angle actually given, 130°, and subtract the triangle from that sector.
- (d) 6√3 cm — Method: AB lies alongside the 30° angle at A and AC is the hypotenuse, so the ratio needed is cosine: cos 30° = AB ÷ AC. Working: the exact value of cos 30° is √3/2, so AB = 12 × √3 ÷ 2, and half of 12 is 6. Answer: AB = 6√3 cm, which is about 10.4 cm. Using sine by mistake gives 12 × 1/2 = 6 cm, which is the length of BC rather than AB. Using tan 30° = 1/√3 gives 12 ÷ √3, which is 4√3 cm. Remembering cos 30° as √3 rather than as √3 halved gives 12√3 cm, longer than the hypotenuse and so impossible.
- (d) Triangle 2, by 3.6 cm² — Method: find both areas with 1/2ab sin C, then compare them. Working: area of triangle 1 = 1/2 × 10 × 13 × sin 64° = 58.4 cm²; area of triangle 2 = 1/2 × 11 × 12 × sin 70° = 62.0 cm²; triangle 2 is larger, by 62.0 − 58.4 = 3.6 cm². Getting the right difference but naming triangle 1 as the larger one, the subtraction done the wrong way round, gives 'Triangle 1, by 3.6 cm²'; leaving out the 1/2 when finding triangle 1's area (giving 116.8 cm² instead of 58.4 cm²) and then subtracting gives 'Triangle 1, by 54.8 cm²'; and using cos 64° instead of sin 64° for triangle 1 (giving 28.5 cm² instead of 58.4 cm²) gives 'Triangle 2, by 33.5 cm²'. Work out both areas fully and correctly before comparing which is bigger.
- (c) 45° — Method: the tower, the ground and the line of sight form a right-angled triangle in which the 25 m height is opposite the angle of elevation and the 25 m along the ground is adjacent to it, so use tan θ = opposite ÷ adjacent. Working: tan θ = 25 ÷ 25 = 1, so θ = tan⁻¹(1). Answer: 45°. The distractors: 90° comes from using sin θ = 25 ÷ 25 = 1, which treats the 25 m along the ground as the hypotenuse when it is the side next to the angle; 1° comes from writing down the value of tan θ as though it were the angle itself; 50° comes from adding the two given lengths, 25 + 25, instead of comparing them.
Build your own mix at the worksheet builder.