Printable · GCSE Higher · ages 14-16
Geometry and measures worksheet — GCSE Higher
Fifteen questions across the geometry and measures statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Calculator
Geometry and measures worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.A ship leaves port P and sails 24 km on a bearing of 040° to a buoy Q. It then sails 31 km on a bearing of 115° to a lighthouse R. Work out the direct distance from P to R. Give your answer to 1 decimal place.
- 2.In triangle ABC, angle ABC = 47°, AC = 12.5 cm and BC = 9.2 cm. Work out the size of angle BAC. Give your answer to 1 decimal place.
- 3.A parallelogram has an area of 54 cm² and a base of 9 cm. Work out its perpendicular height.
- 4.A ship's radar can detect other ships up to 20 km away, over a sector-shaped area with angle 90°. A monitoring company charges £0.50 per square kilometre covered by one radar sweep. Using π = 3.14, work out the total charge for one sweep.
- 5.A sector of a circle has radius 12 cm and angle 45°. Using π = 3.14, work out the area of the sector.
- 6.A shop stacks identical storage crates in a display. The diagram shows the plan of the floor positions used, with one corner position marked. Every floor position is filled with crates stacked 3 high, except the marked corner position, which is left completely empty. Work out how many crates are used in total.
- 7.The angle between north and a footpath is 35°, measured clockwise from north. What is the three-figure bearing of the footpath?
- 8.In triangle ABC, AB = 12 cm, AC = 9 cm and angle BAC = 55°. Work out the size of angle ABC. Give your answer to 1 decimal place.
- 9.Two vertical masts stand on level ground, 40 m apart. One mast is 30 m tall and the other is 50 m tall. Work out the straight-line distance between the tops of the two masts. Give your answer to 1 decimal place.
- 10.A plan of a car park is drawn to a scale of 1 : 500. A parking bay is drawn as a rectangle measuring 1.2 cm by 0.6 cm. The real width of the bay corresponds to the 0.6 cm side. What is the real width of the bay, in metres?
- 11.PT is a tangent to a circle with centre O, touching the circle at T. OT is a radius. Angle OPT = 27°, where P is a point outside the circle. Work out the size of angle POT.
- 12.A circular decoration has a radius of 10 cm. A ribbon costs £0.50 per centimetre and is fixed along the curved edge (the arc) of a sector-shaped section with an angle of 90°. Using π = 3.14, work out the cost of the ribbon for this section.
- 13.A scale drawing shows a room that is 5 cm wide. The real room is 15 m wide. Write the scale of the drawing in the form 1 : n.
- 14.In triangle ABC, AB = 6 cm, angle ABC = 40° and AC = 9 cm. Using the sine rule, sin(ACB) = AB × sin(ABC) ÷ AC, which gives two possible values for angle ACB: 25.4° or 154.6° (each to 1 decimal place). By considering the angle sum of the triangle, decide which of these two values angle ACB can actually take, and hence work out angle BAC. Give your answer to 1 decimal place.
- 15.A garden plan is drawn to a scale of 1 cm : 1.8 m. A path on the plan measures 4.5 cm. What is the real length of the path, in metres, to 1 decimal place?
Answer key
- (b) 43.8 km — Method: find the angle of the triangle at Q from the two bearings, then use the cosine rule on the two known sides and that included angle. Working: the bearing of P from Q is the back bearing of 040°, which is 040° + 180° = 220°, and the bearing of R from Q is 115°, so angle PQR = 220° − 115° = 105°. Then PR² = 24² + 31² − 2 × 24 × 31 × cos 105° = 576 + 961 − 1488 × (−0.25882) = 1537 + 385.12 = 1922.12, and the square root of 1922.12 is 43.842. Answer: PR = 43.8 km to 1 decimal place. The distractors: 33.9 km comes from subtracting the bearings, 115° − 040° = 75°, and using 75° as the angle at Q, which is the angle the ship turns through, not the angle inside the triangle; 19.9 km comes from using the first bearing itself, 040°, as the angle at Q; 55.0 km comes from adding the two legs, 24 + 31, which would be the distance only if the ship had sailed in a straight line.
- (c) 32.6° — Method: an angle is wanted from two sides and the angle facing one of them, so use the sine rule in the form sin A/a = sin B/b. Working: BC = 9.2 cm faces angle BAC and AC = 12.5 cm faces the 47° angle, so sin BAC = 9.2 × sin 47° ÷ 12.5 = 6.7285 ÷ 12.5 = 0.5383, and the inverse sine of 0.5383 is 32.566°. Because BC is shorter than AC, angle BAC must be smaller than 47°, so the acute value is the only one that fits. Answer: angle BAC = 32.6° to 1 decimal place. The distractors: 147.4° comes from taking 180° − 32.566°, the obtuse angle with the same sine, without checking it — 147.4° and 47° already add to more than 180°, so no such triangle exists; 83.6° comes from putting the sides the wrong way up, 12.5 × sin 47° ÷ 9.2, which gives a sine of 0.9937; 57.4° comes from pressing the inverse cosine key on 0.5383 instead of the inverse sine key.
- (c) 6 cm — For a parallelogram, area = base × height, so height = area ÷ base = 54 ÷ 9 = 6 cm. 12 cm comes from using the triangle's reverse formula, height = 2 × area ÷ base, which does not apply to a parallelogram. 45 cm comes from subtracting the base from the area, 54 − 9, instead of dividing. 486 cm comes from multiplying the area by the base, 54 × 9, instead of dividing.
- (a) £157.00 — Area covered = (angle ÷ 360) × π × r² = (90 ÷ 360) × 3.14 × 400 = 0.25 × 1256 = 314 km². Charge = 314 × £0.50 = £157.00. (£7.85 comes from forgetting to square the radius, using 0.25 × 3.14 × 20 = 15.7 km² and then charging that; £628.00 comes from finding the area of a full circle, 3.14 × 400 = 1256 km², and forgetting the angle fraction before charging; £15.70 comes from using the arc length formula, 0.25 × 2 × 3.14 × 20 = 31.4, in place of the area, and charging that.)
- (c) 56.52 cm² — Sector area = (45 ÷ 360) × 3.14 × 12² = 0.125 × 3.14 × 144 = 56.52 cm². (4.71 cm² comes from forgetting to square the radius; 452.16 cm² comes from finding the area of the whole circle and forgetting the angle fraction; 9.42 cm² comes from using the arc length formula instead of the sector area formula.)
- (a) 33 — Method: total crates = (number of floor positions that actually have crates on them) × (the stack height). Working: there are 4 × 3 = 12 floor positions in the whole arrangement, but one corner position is left empty, leaving 11 filled positions; each filled position is stacked 3 crates high, so 11 × 3 = 33. Answer: 33. The distractors: 36 comes from forgetting to remove the empty corner and using all 12 positions (12 × 3). 35 comes from removing only one crate for the empty corner instead of the full stack of 3 (36 − 1). 11 comes from counting the filled floor positions and stopping there, forgetting that each one carries a stack 3 crates high.
- (a) 035° — A bearing is measured clockwise from north, so an angle of 35° clockwise from north is a bearing of 035° (written with three figures). Choosing 325° measures the angle anticlockwise instead of clockwise (360 − 35 = 325). Choosing 215° adds 180° to the angle, mixing this up with a back-bearing calculation (35 + 180 = 215). Choosing 350° reorders the digits of 035, writing the ones digit before the tens digit by mistake.
- (b) 47.2° — Method: two sides and the angle between them are given, so find the third side with the cosine rule and then use the sine rule for the angle. Working: BC² = 12² + 9² − 2 × 12 × 9 × cos 55° = 144 + 81 − 216 × 0.57358 = 225 − 123.89 = 101.11, so BC = 10.0552 cm. Angle ABC faces AC = 9 cm and the 55° angle faces BC = 10.0552 cm, so sin ABC = 9 × sin 55° ÷ 10.0552 = 7.3724 ÷ 10.0552 = 0.73318, and the inverse sine of 0.73318 is 47.154°. Since AC is not the longest side, angle ABC is not the largest angle and the acute value is the one that fits. Answer: angle ABC = 47.2° to 1 decimal place. The distractors: 77.8° comes from pairing the angle at B with AB = 12 cm, the side beside it, instead of AC = 9 cm, the side it faces, which actually produces angle ACB; 23.2° comes from a sign slip in the cosine rule step, 225 + 123.89 = 348.89, giving BC = 18.68 cm before the sine rule is applied; 37.9° comes from dividing by AB = 12 cm rather than by the side facing the 55° angle.
- (a) 44.7 m — Method: the line joining the two tops is the hypotenuse of a right-angled triangle whose horizontal side is the gap between the masts and whose vertical side is the difference in their heights, so Pythagoras' theorem applies. Working: the difference in heights is 50 − 30 = 20 m, so d² = 40² + 20² = 1600 + 400 = 2000 and d = √2000 = 44.721…, which is 44.7 m to 1 decimal place. Answer: 44.7 m. The distractors: 34.6 m comes from subtracting the squares, √(40² − 20²), instead of adding them; 60.0 m comes from adding the two sides of the triangle, 40 + 20, rather than using Pythagoras' theorem; 50.0 m is the height of the taller mast, copied from the question in place of the distance asked for.
- (b) 3 — The real width is 0.6 × 500 = 300 cm, which converts to 3 m by dividing by 100. A candidate who uses the wrong side of the rectangle, 1.2 cm, instead of the 0.6 cm width, gets 1.2 × 500 = 600 cm = 6 m. A candidate who multiplies correctly but converts the 300 cm to metres by dividing by 1000 instead of 100 gets 0.3 m. A candidate who converts by dividing by 10 instead of 100 gets 30 m. The real width of the bay is 3 m.
- (b) 63° — Method: a tangent meets the radius drawn to the point of contact at a right angle, so triangle OPT has a 90° angle at T; the three angles of the triangle then sum to 180°. Working: angle OTP = 90°, angle OPT = 27°, so angle POT = 180 − 90 − 27 = 63 degrees. Answer: 63°. The tangent-radius angle is a fixed 90°, not something to assume equal to another angle in the triangle, and the three angles of ANY triangle sum to 180°, never 360°: that total belongs to a quadrilateral, not a triangle.
- (c) £7.85 — Arc length = (90 ÷ 360) × 2 × 3.14 × 10 = 0.25 × 62.8 = 15.7 cm. Cost = 15.7 × £0.50 = £7.85. (£31.40 comes from finding the full circumference and forgetting the angle fraction; £15.70 comes from using the diameter, 20 cm, in place of the radius; £157.00 comes from multiplying the arc length by the radius instead of by the cost per centimetre.)
- (c) 1 : 300 — First convert both lengths to the same unit: 15 m = 1500 cm. The scale compares 5 cm on the drawing to 1500 cm in real life, so dividing both parts by 5 gives a scale of 1 : 300. A candidate who compares 5 to 15 without converting units gets 1 : 3. A candidate who converts 15 m to 150 cm, using the wrong conversion factor, gets 1 : 30. A candidate who converts 15 m to 15000 cm, again using the wrong conversion factor, gets 1 : 3000. The scale of the drawing is 1 : 300.
- (a) 114.6° — Using the sine rule, sin(ACB) = AB × sin(ABC) ÷ AC = 6 × sin(40°) ÷ 9. Since sin(40°) ≈ 0.64279, this gives sin(ACB) ≈ 3.8567 ÷ 9 ≈ 0.42852, so angle ACB ≈ 25.4° or its supplement, 154.6°. Testing the obtuse candidate: 40° + 154.6° = 194.6°, which already exceeds 180°, so angle BAC would have to be negative — impossible, so 154.6° is rejected. With angle ACB ≈ 25.4°, angle BAC = 180° − 40° − 25.4° = 114.6°. 25.4° is angle ACB, not angle BAC that the question asks for. 14.6° comes from using the invalid 154.6° candidate anyway and then wrongly turning the resulting negative angle sum (−14.6°) positive instead of rejecting it. 65.4° comes from inverting the sine rule ratio — dividing AC × sin(ABC) by AB instead of AB × sin(ABC) by AC — which gives a different, incorrect candidate for angle ACB entirely.
- (a) 8.1 m — Multiply the length on the plan by the scale factor: 4.5 × 1.8 = 8.1, so the real length is 8.1 m. Choosing 6.3 m adds the two numbers instead of multiplying them (4.5 + 1.8 = 6.3). Choosing 2.5 m divides the plan length by the scale factor the wrong way round (4.5 ÷ 1.8 = 2.5) instead of multiplying. Choosing 9.0 m rounds the scale factor up to 2 before multiplying (4.5 × 2 = 9.0), losing the accuracy the 1.8 was giving.
Build your own mix at the worksheet builder.