Printable · GCSE Higher · ages 14-16
Geometry and measures worksheet — GCSE Higher
Fifteen questions across the geometry and measures statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Geometry and measures worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.Two similar triangular tiles have lengths in the ratio 3 : 5. The longest side of the smaller tile is 9 cm. Work out the length of the longest side of the larger tile.
- 2.A circle has two straight radii drawn from the centre to the edge, together with the arc between them. Write down the name of the region enclosed by these two radii and the arc.
- 3.A robot on a grid moves by the vector , then by the vector , then by the vector . Write down the single column vector that has the same overall effect as these three moves.
- 4.Triangle ABC is isosceles, with AB = AC. Angle B = 70°. Which reason correctly explains why angle C = 70°?
- 5.Two spheres are similar solids. Their radii are in the ratio 3 : 4. Write down the ratio of their surface areas.
- 6.A roof truss has two horizontal parallel rafters, one above the other. A straight strut crosses both rafters. Where the strut crosses the lower rafter, the angle above the rafter and to the left of the strut is 65°. Work out the size of the angle above the upper rafter and to the right of the strut, where the strut crosses it.
- 7.Two sides of a triangle are 20 cm and 8 cm long. Write down which one of these lengths is possible for the third side.
- 8.A sector of a circle has radius 8 cm and takes up three-quarters of the full circle. Work out the perimeter of the sector, in terms of π.
- 9.A drinks company sells a novelty giant bottle that is geometrically similar to its standard 500 ml bottle, scaled up by a length factor of 1.5. Work out the capacity of the giant bottle, in ml.
- 10.A trapezium-shaped garden bed has parallel sides of 2.5 m and 4.5 m, and a perpendicular width of 3 m. A gardener wants to know the area of the bed before ordering topsoil. Work out the area of the garden bed.
- 11.The diagram shows the plan of the base layer of a solid built from identical cubes. A second layer of cubes is added on top, filling the entire base layer to a height of 2 cubes everywhere. Work out how many squares are visible in the plan view of this solid.
- 12.Vertex X of a triangle is at (−3, 5). After a translation, the image of X is at (2, −1). Write down the column vector of this translation.
- 13.A regular hexagon has sides of length 8 cm. By splitting the hexagon into 6 identical triangles that meet at its centre, work out the area of the hexagon. Give your answer to 1 decimal place.
- 14.Triangle T has vertices (1, 1), (3, 1) and (1, 4). It is mapped onto triangle T′ with vertices (5, −1), (3, −1) and (5, −4). Which single composition of two transformations maps T onto T′?
- 15.An enlargement has a scale factor of −2. Priti says the image must be a mirror image of the original shape. Is Priti correct?
Answer key
- (c) 15 cm — Method: going from the smaller tile to the larger one, every length is multiplied by the scale factor 5 ÷ 3. Working: 9 ÷ 3 = 3, and 3 × 5 = 15. Answer: 15 cm. The distractors: 11 cm comes from adding the difference between the parts of the ratio, 5 − 3 = 2, to the 9 cm side, treating a ratio as a gap rather than a multiplier; 45 cm comes from multiplying by 5 and forgetting to divide by 3; 27 cm comes from multiplying by 3, which is the part of the ratio belonging to the smaller tile.
- (d) sector — The region enclosed by two radii and the arc between them is called a sector. A segment is a different region, enclosed by a CHORD and an arc — it does not touch the centre at all. A chord is a straight line, not a region, so it cannot be the answer to a question asking for a region. A semicircle is only correct when the angle between the two radii is exactly 180°, which is not stated here, so it is too specific to be the general answer.
- (d) $\binom{0}{4}$ — Add the three vectors component by component: x: 3 + (−7) + 4 = 0; y: −2 + 5 + 1 = 4, giving $\binom{0}{4}$. $\binom{−4}{3}$ comes from adding only the first two vectors and forgetting the third. $\binom{14}{−6}$ comes from reading the second vector as $\binom{7}{−5}$ instead of $\binom{−7}{5}$, flipping its signs. $\binom{4}{0}$ comes from swapping the final x-total and y-total.
- (c) base angles of an isosceles triangle are equal — Because AB = AC, triangle ABC is isosceles, and the base angles of an isosceles triangle — the two angles opposite the equal sides — are always equal, which is why angle C equals angle B, 70°. Angles in a triangle adding up to 180° is a true fact about the triangle as a whole, but it is not the reason two specific angles are equal to each other. Corresponding angles are equal is a fact about parallel lines cut by a transversal, which does not apply inside a single triangle like this. Vertically opposite angles are equal is a fact about two lines crossing, not about a triangle's base angles.
- (c) 9 : 16 — Method: in similar solids the ratio of the surface areas is the square of the ratio of corresponding lengths. Working: the radii are in the ratio 3 : 4, so the surface areas are in the ratio 3² : 4² = 9 : 16. Answer: 9 : 16. The distractors: 27 : 64 is 3³ : 4³, the ratio of the volumes, which cubes the length ratio instead of squaring it; 3 : 4 leaves the length ratio untouched, as though surface area scaled in the same way as a length; 81 : 256 comes from squaring a second time, applying the rule to the ratio 9 : 16 rather than to the radii.
- (c) 115 — Method: use corresponding angles to carry the 65° angle from the lower rafter up to the upper rafter, then use angles on a straight line to move to the other side of the strut. Working: the angle above the upper rafter and to the left of the strut corresponds to the given angle, so it is 65°; the angle above the upper rafter and to the right of the strut lies on a straight line with it, so it is 180 − 65 = 115. Answer: 115°. A candidate who assumes the angle stays 65° without allowing for the move from the left of the strut to the right of it gives 65. A candidate who uses 90° instead of 180°, working out 90 − 65, gets 25. A candidate who adds instead of subtracting, working out 180 + 65, gets 245.
- (d) 15 cm — Method: any two sides of a triangle must together be longer than the third, so the third side must be longer than the difference of the two given sides and shorter than their sum. Working: the difference is 20 − 8 = 12 cm and the sum is 20 + 8 = 28 cm, so the third side must be between 12 cm and 28 cm, and 15 cm lies inside that range. Answer: 15 cm. The distractors: 12 cm is exactly the difference, so the three lengths would lie flat along a straight line and never close into a triangle; 5 cm is shorter than the difference — 5 + 8 = 13 cm cannot reach across the 20 cm side — and is chosen by candidates who check no lower limit at all; 30 cm is longer than the sum of the other two, so those two sides could never meet, and it is chosen by candidates who check no upper limit.
- (a) 12π + 16 cm — A three-quarter sector's perimeter is the curved arc plus the two straight radii that close the shape. The full circumference is 2 × π × 8 = 16π cm, and three-quarters of that is 12π cm. Adding the two straight radii, 8 cm each, gives 12π + 16 cm. Leaving out the straight edges gives just 12π cm. Using one-quarter of the circumference, the piece left over rather than the piece asked for, gives 4π + 16 cm. Adding only one radius instead of two gives 12π + 8 cm.
- (d) 1687.5 ml — The length scale factor from the standard bottle to the giant bottle is 1.5, so the volume scale factor is 1.5³ = 3.375. The capacity of the giant bottle is 500 × 3.375 = 1687.5 ml. 750 ml comes from multiplying by the length factor 1.5 directly, without cubing it. 1125 ml comes from using the area scale factor 1.5² = 2.25 instead of the volume scale factor. 2250 ml comes from treating 'cubed' as 'multiplied by 3', giving 1.5 × 3 = 4.5 as the scale factor instead of 1.5³.
- (b) 10.5 m² — The area of a trapezium is half of the sum of the parallel sides, multiplied by the width. Add the parallel sides: 2.5 + 4.5 = 7. Multiply by the width: 7 × 3 = 21. Half of 21 is 10.5 m². 21 m² forgets to halve, using the full (2.5+4.5)×3. 3.5 m² averages the two parallel sides, (2.5+4.5)÷2 = 3.5, but forgets to multiply by the width. 6.75 m² treats the bed as a triangle, using only the longer parallel side: half of 4.5 × 3.
- (c) 6 squares — Method: the plan view shows the footprint of the solid; a second layer stacked on top of floor positions that are already covered does not create any new squares in the plan. Working: the row of 4 cubes and the row of 2 cubes attached at the end do not overlap, so the footprint has 4 + 2 = 6 distinct squares. Answer: 6 squares. The distractors: 12 squares comes from counting the total number of cubes used, including the second layer (6 floor positions × 2 layers = 12), instead of the footprint. 4 squares comes from counting only the row of four and forgetting the attached row of two. 5 squares comes from wrongly treating the corner square as shared between the two rows (4 + 1 instead of 4 + 2).
- (a) $\binom{5}{−6}$ — The vector is (image − original) in each coordinate: (2 − (−3), −1 − 5) = (5, −6). $\binom{−5}{6}$ comes from working out original − image instead of image − original. $\binom{5}{6}$ gets the x-component right but makes a sign error on the y-component. $\binom{−5}{−6}$ gets the y-component right but makes a sign error on the x-component, working out −3 − 2 = −5 instead of 2 − (−3) = 5.
- (b) 166.3 cm² — Method: split the regular hexagon into 6 identical triangles meeting at the centre, each with two sides of 8 cm and a 60° angle between them, and use Area = (1/2)ab sin C on just one of them. Working: one triangle's area = 1/2 × 8 × 8 × sin 60° = 27.7 cm² (1 d.p.); the hexagon is 6 of these, so its area is 6 × 27.7 = 166.3 cm² (1 d.p.). Answer: 166.3 cm². Reporting just one triangle's area, without multiplying by 6, gives 27.7 cm²; treating the angle at the centre as a right angle instead of 60°, using 1/2 × 8 × 8 with no sine factor at all, gives 6 × 32 = 192.0 cm²; and multiplying by 5 instead of 6, miscounting the triangles in the hexagon, gives 5 × 27.7 = 138.6 cm². A regular hexagon always splits into exactly 6 triangles at its centre — count them before you multiply.
- (b) Rotate 180° about the origin, then translate by (6, 0). — Rotating 180° about the origin sends (x, y) to (−x, −y); applied to T's vertices (1, 1), (3, 1) and (1, 4) this gives (−1, −1), (−3, −1) and (−1, −4). Translating this image by the vector (6, 0) adds 6 to every x-coordinate, giving (5, −1), (3, −1) and (5, −4), which matches T′ exactly. Reflecting in the x-axis first changes the sign of the y-coordinate only, and translating that image by (6, 0) gives (7, −1), (9, −1) and (7, −4) — the wrong triangle. Using the correct rotation but translating by (4, 0) instead of (6, 0) gives (3, −1), (1, −1) and (3, −4), shifted 2 units too far left. Reflecting in the y-axis first changes the sign of the x-coordinate only, so translating that image by (6, 0) leaves every y-coordinate positive, giving (5, 1), (3, 1) and (5, 4) — the correct x-coordinates but the wrong sign throughout on y.
- (a) No — it's a 180° rotation, not a reflection. — A negative scale factor scales the shape by the size of the factor and turns it through 180° about the centre of enlargement — every point of the image lands on the opposite side of the centre from the object. A 180° turn is a rotation, and a rotation never reverses a shape's handedness (its sense), whereas a reflection always does, so the image is not a mirror image: Priti is wrong. The option claiming negative numbers always mean a reflection confuses the sign of a scale factor with the transformation of reflection — they are not the same thing. The option saying only the size changes ignores the sign altogether: the 180° turn does change the way the shape faces, even though it leaves the handedness unchanged. The option equating 'upside down' with 'mirrored' assumes the two always mean the same thing, but a 180° rotation and a reflection in a horizontal line can both look 'upside down' while being different transformations — only the reflection reverses the shape's handedness.
Build your own mix at the worksheet builder.