Printable · GCSE Higher · ages 14-16
Geometry and measures worksheet — GCSE Higher
Fifteen questions across the geometry and measures statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Geometry and measures worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.A hiker walks on a bearing of 065°. She then turns clockwise through 90° and continues walking in a straight line. What bearing is she now walking on?
- 2.Triangle S has vertices (2, 2), (5, 2) and (2, 5). It is mapped onto triangle S′ with vertices (2, 5), (5, 5) and (2, 2). Which single composition of two transformations maps S onto S′?
- 3.A shape is reflected in the line y = −x. Which of these points is invariant under this reflection?y = −x
- 4.A ramp's sloped surface crosses two horizontal parallel rails. At the top rail, the angle between the ramp and the rail on the right of the ramp is (3x + 10)°. At the bottom rail, the angle between the ramp and the rail on the left of the ramp is (5x − 30)°. Work out the value of x.
- 5.Triangle ABC and triangle DEF are similar. The area of triangle ABC is 36 cm² and the area of triangle DEF is 100 cm². Work out the ratio of the lengths of triangle ABC to the lengths of triangle DEF, in its simplest form.
- 6.A scale model of a bridge is built so that 2 cm on the model represents 5 m of the real bridge. The real bridge is 45 m long. Work out the length of the model bridge, in centimetres.
- 7.A crane's hook starts at the point (3.4, 9.5) on a construction site plan measured in metres. It moves along the vector to pick up a beam, then along the vector to place it. Work out the single column vector that describes the hook's overall movement from its start position to where it places the beam.
- 8.Work out the gradient of the line segment joining A(2, 3) and B(6, 11).
- 9.A student is asked to rearrange the cosine rule a² = b² + c² − 2bc cos A to make cos A the subject. They write: cos A = (a² − b² − c²) / (2bc). Is the student's rearrangement correct?
- 10.A, B and C are points on a circle with centre O. B is on the major arc AC. Angle AOC = 116°. Work out the size of angle ABC.
- 11.Point A(1, 2) is enlarged to give image point A′(7, −4). The centre of enlargement lies on the x-axis. Work out the scale factor of the enlargement.
- 12.A, B and C are points on a circle with centre O, and AC is a diameter of the circle. Work out the size of angle ABC.
- 13.A sector of a circle has an angle of 90° at the centre. Write down what fraction of the whole circle this sector represents.
- 14.A square-based pyramid is cut by a flat plane parallel to its base, partway up between the base and the apex. What shape is the cross-section?
- 15.A quadrilateral has both pairs of opposite sides parallel and equal in length, but none of its angles are right angles. Which statement about this quadrilateral is correct?
Answer key
- (c) 155° — Turning clockwise adds to the bearing. Starting on a bearing of 065° and turning clockwise through 90° gives 065° + 90° = 155°. A candidate who instead subtracts, working out 90° − 65° = 25°, has performed the wrong operation, giving 025°. A candidate who turns anticlockwise instead of clockwise works out 065° − 90°, which gives a negative number, and adding 360° to fix this gives 335° — the bearing for turning the other way. A candidate who thinks turning does not change the bearing at all keeps the answer as 065°. The new bearing, turning clockwise, is 155°.
- (a) Reflect in the x-axis, then translate by (0, 7). — Reflecting in the x-axis sends (x, y) to (x, −y); applied to S's vertices (2, 2), (5, 2) and (2, 5) this gives (2, −2), (5, −2) and (2, −5). Translating this image by the vector (0, 7) adds 7 to every y-coordinate, giving (2, 5), (5, 5) and (2, 2), which matches S′ exactly. Using the correct reflection but translating by (7, 0) instead moves the image sideways rather than upwards, giving (9, −2), (12, −2) and (9, −5) — nowhere near S′. Reflecting in the y-axis instead of the x-axis changes the sign of the x-coordinate rather than the y-coordinate, so translating that image by (0, 7) gives (−2, 9), (−5, 9) and (−2, 12), the wrong shape entirely. Rotating 180° about the origin instead of reflecting sends every coordinate to its negative, so translating by (0, 7) gives (−2, 5), (−5, 5) and (−2, 2) — the y-coordinates match S′ but the x-coordinates do not.
- (a) (4, −4) — A point is invariant under a reflection only if it lies exactly on the mirror line. The line y = −x consists of every point where the y-coordinate is the negative of the x-coordinate: (4, −4) satisfies this, since −4 = −(4), so it is invariant. (5, 5) lies on the line y = x, a different line altogether, not y = −x. (4, 4) has equal coordinates, but that alone does not put it on y = −x; it would need y = −4, not 4. (−4, −4) also has equal coordinates and lies on y = x, not y = −x — its coordinates would need opposite signs to sit on the given mirror line. Only a point whose coordinates are negatives of each other stays fixed under this reflection.
- (d) 20 — Alternate angles between parallel lines are equal, so 3x + 10 = 5x − 30. Rearranging, 10 + 30 = 5x − 3x, so 40 = 2x, and x = 20. −10 comes from a sign error when rearranging, moving a term to the wrong side and getting −20 = 2x instead. 25 comes from wrongly treating the two angles as co-interior and adding them to 180°: (3x + 10) + (5x − 30) = 180 gives 8x − 20 = 180, so x = 25. 47.5 makes the same co-interior mistake but sets the sum equal to 360° instead of 180°, giving 8x − 20 = 360 and x = 47.5.
- (a) 3 : 5 — Method: for similar figures the ratio of the areas is the square of the ratio of the lengths, so the length ratio is found by taking the square root of each part of the area ratio. Working: the areas are in the ratio 36 : 100, and taking square roots gives √36 : √100 = 6 : 10, which cancels to 3 : 5. Answer: 3 : 5. The distractors: 9 : 25 is 36 : 100 in its simplest form, so it is still the ratio of the areas and the square roots were never taken; 5 : 3 takes the roots correctly but writes the parts the wrong way round, giving DEF to ABC when ABC to DEF was asked for; 25 : 9 makes both mistakes at once, leaving the area ratio and reversing it.
- (c) 18 — Method: divide the real length by 5 to find how many 'units' of 5 m it contains, then multiply by 2 cm for each unit. Working: 45 ÷ 5 = 9, so the real bridge is 9 lots of 5 m; each lot is represented by 2 cm on the model, so the model length is 9 × 2 = 18 cm. Options: 9 comes from stopping after the division, without multiplying by the 2 cm per unit; 90 comes from multiplying the real length by 2 directly, without dividing by 5 first; 4.5 comes from dividing by 5 and then dividing by 2 again, instead of multiplying by 2. Answer: 18.
- (b) $\binom{-0.4}{-7}$ — The overall movement is the sum of the two vectors: (−1.2 + 0.8, −4.5 + (−2.5)) = (−0.4, −7). '$\binom{-2}{-2}$' comes from subtracting the second vector from the first instead of adding them. '$\binom{-0.4}{7}$' gets the top number right but drops the negative sign on the bottom number. '$\binom{2}{-7}$' comes from treating −1.2 + 0.8 as if the signs did not matter, giving +2 instead of −0.4.
- (a) 2 — Gradient = (change in y) ÷ (change in x) = (11 − 3) ÷ (6 − 2) = 8 ÷ 4 = 2. "0.5" comes from dividing the change in x by the change in y the wrong way round: 4 ÷ 8. "8" is only the change in y, forgetting to divide by the change in x at all. "−2" comes from a sign error, as if the y-coordinate had decreased rather than increased.
- (b) No — should divide by −2bc, not +2bc; sign is wrong. — Method: rearrange a² = b² + c² − 2bc cos A step by step and compare with the student's version. Working: subtracting b² + c² from both sides gives a² − b² − c² = −2bc cos A, then dividing both sides by −2bc gives cos A = (a² − b² − c²) / (−2bc), which is the same as cos A = (b² + c² − a²) / (2bc). The student divided by +2bc instead of −2bc, so their expression is the negative of the correct one — the verdict is No. Saying the algebra is fine because 'either sign order gives a valid result' ignores that only one of the two signed expressions matches the original equation. Saying the denominator should be bc rather than 2bc is a different, unrelated error — the coefficient 2bc in the original formula is correct and must stay.
- (b) 58° — Method: the angle at the centre is TWICE the angle at the circumference when both stand on the same arc. Working: angle AOC is the angle at the centre standing on arc AC, and angle ABC is the angle at the circumference standing on the same arc AC, with B on the major arc, so angle AOC = 2 × angle ABC. Rearranging, angle ABC = 116 ÷ 2 = 58 degrees. Answer: 58°. Halve the centre angle, do not double it, and use the angle AOC exactly as given, 116°: you do not need its reflex angle here, because B sits on the major arc, which is precisely the arrangement the theorem is stated for.
- (a) −2 — Let the centre be C = (c, 0). The vector from the centre to the image equals the scale factor k times the vector from the centre to the object: (7 − c, −4) = k(1 − c, 2). The y-coordinate gives −4 = 2k, so k = −2 — this doesn't depend on knowing c. (Checking: substituting k = −2 into the x-equation gives c = 3, consistent with a centre on the x-axis.) '2' comes from taking the magnitude of the ratio without noticing the image is on the opposite side of the centre from the object, so the sign should be negative. '−1/2' comes from inverting the scale factor, dividing the object's coordinate by the image's instead of the other way round. '3' is the x-coordinate of the centre, mistaken for the scale factor.
- (a) 90° — Method: the angle in a semicircle theorem states that the angle subtended at the circumference by a diameter is always a right angle, whatever the circle's size. Working: since AC is a diameter, the angle ABC subtended at the circumference by AC is 90 degrees, regardless of the circle's radius. Answer: 90°. This result holds for every position of B on the circle and for every size of circle, so no length or radius is ever needed: do not confuse angle ABC with the straight angle along the diameter itself, which is 180°, and do not halve the right angle again.
- (c) 1/4 — A full turn at the centre of a circle is 360°, so a sector's fraction of the circle is its angle divided by 360°: 90 ÷ 360 = 1/4. 1/2 would be the fraction for a sector with an angle of 180°, not 90°. 3/4 is the fraction of the rest of the circle, the major sector left over from the 270° that is not part of this sector. 1/8 would be the fraction for a sector with an angle of 45°, half of 90°.
- (c) Square — Because the cut is parallel to the square base, it produces a shape that is similar to the base — the same shape, scaled down — so it is also a square, with four equal sides, smaller than the base. A candidate who looks at the sloped triangular faces instead of at the horizontal cut answers triangle. A candidate who pictures a slanted cut, which would shorten one pair of sides, answers trapezium, but a cut parallel to the base scales all four sides by the same amount. A candidate who counts an extra side, perhaps including an edge of the base, answers pentagon. The cross-section is a square.
- (c) It is a parallelogram but not a rectangle — Method: match the given properties to the definition of each named quadrilateral. Working: having both pairs of opposite sides parallel and equal in length is exactly the definition of a parallelogram; since none of the angles are right angles, it cannot also be a rectangle, which needs four right angles. Options: 'must be a rectangle' wrongly assumes every parallelogram has right angles; 'must be a rhombus' wrongly assumes equal opposite sides means all four sides are equal, but only the opposite pairs are stated as equal here; 'trapezium' is wrong because a trapezium has exactly one pair of parallel sides, while this shape has two pairs, so it is a parallelogram and not a trapezium. Answer: it is a parallelogram but not a rectangle.
Build your own mix at the worksheet builder.