Printable · GCSE Higher · ages 14-16
Geometry and measures worksheet — GCSE Higher
Fifteen questions across the geometry and measures statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Geometry and measures worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.Point P has coordinates (2, 1). Transformation A reflects a point in the x-axis. Transformation B translates a point by the vector (0, 4). Work out the coordinates of the image of P when A is applied first, followed by B.
- 2.Two identical ladders lean against the same vertical wall from opposite sides, each making an angle of 58.2° with the ground. The two ladders and the ground form a triangle. Work out the size of the angle between the two ladders at the top, where they meet.
- 3.Triangle JKL has a right angle at K, hypotenuse JL = 13 cm, and side JK = 5 cm. Triangle MNO has a right angle at N, hypotenuse MO = 13 cm, and side MN = 5 cm. Using only the facts given, and without working out any further lengths, write down the congruence condition that proves triangle JKL is congruent to triangle MNO.
- 4.Line l1 has equation x = 2, and line l2 has equation y = x − 1. They intersect at a single point. A shape is reflected in l1, and the image is then reflected in l2. Which point is invariant under this combined transformation?y = x − 1
- 5.A circular plate has a diameter of 20 cm. Work out the area of the plate. Use π = 3.14.
- 6.A parallelogram-shaped tile has two sides of 6 cm and 9 cm, with an angle of 60° between them. Work out the area of the tile. Give your answer to 1 decimal place.
- 7.In triangle ABC the angle at A and the angle at C are equal. The side AB is extended beyond B, and the exterior angle formed at B measures 98°. Work out the size of the angle at A.
- 8.A roof truss is shaped like an isosceles triangle resting on a horizontal ceiling joist. The truss's sloping edges are equal in length, and the angle at its apex is 40°. The ceiling joist continues in a straight line beyond the foot of the truss. Work out the angle between the truss's sloping edge and the extended joist, on the outside of the truss.
- 9.A flower bed in the shape of a parallelogram has a base of 3.5 m and a perpendicular height of 2 m. Compost costs £4.80 per m². Work out the total cost of covering the flower bed with compost.
- 10.A transversal crosses a pair of parallel lines. At one line, the angle is (5x + 4)°. The corresponding angle at the other line is (3x + 24)°. Work out the value of x.
- 11.A patio plan states: 'Side AB of the patio is parallel to side DC, and AB is longer than DC. Sides BC and AD are not parallel to each other and are not equal in length.' The four sides measure AB = 5.1 m, BC = 3.2 m, DC = 2.8 m and AD = 4.5 m. The tiler needs to order edging strip only for the sides that are not parallel to any other side. What total length of edging strip, in metres, should the tiler order?
- 12.A scale drawing of a park uses a scale of 1 : 2000. A path is drawn 8.5 cm long on the drawing. A cyclist rides the length of the path and then rides straight back again along the same path. How far does the cyclist travel in total, in metres?
- 13.In triangle ABC, AB = 5 cm, BC = 3 cm and AC = 7 cm. Work out the size of angle ABC.
- 14.A scale model of a bridge is built so that 2 cm on the model represents 5 m of the real bridge. The real bridge is 45 m long. Work out the length of the model bridge, in centimetres.
- 15.Two metal window frames are checked before installation. Frame A has edges of 40 cm and 65 cm, with a marked angle of 35° at the far end of the 65 cm edge, away from where the two given edges meet. Frame B has matching edges of 40 cm and 65 cm, with a matching 35° angle in the same position. The fitter wants to know if these measurements alone guarantee the two frames are congruent. What should the fitter be told?
Answer key
- (b) (2, 3) — Applying A first: reflecting (2, 1) in the x-axis gives (2, −1). Applying B to that image: translating (2, −1) by (0, 4) gives (2, −1 + 4) = (2, 3). Applying the transformations in the opposite order — B first, then A — gives a different result: (2, 1) translates to (2, 5), which then reflects to (2, −5); this shows that the order genuinely matters here. Applying only A and stopping there, without the translation, gives (2, −1). Applying only B and stopping there, without the reflection, gives (2, 5). Do both transformations, in the order A then B, and the image of P is (2, 3).
- (d) 63.6 — Method: the three angles inside the triangle formed by the two ladders and the ground add up to 180°. Working: 180 − 58.2 − 58.2 = 63.6. Answer: 63.6°. A candidate who assumes the top angle equals the base angles gives 58.2. A candidate who subtracts only one base angle from 180°, working out 180 − 58.2, gets 121.8. A candidate who doubles the base angle instead of subtracting it twice from 180°, working out 2 × 58.2, gets 116.4.
- (c) RHS — Both triangles are right-angled, and have equal hypotenuses (13 cm) and one equal corresponding side (5 cm), so they are congruent by the RHS (right angle, hypotenuse, side) condition — the three facts given are exactly a right angle, a hypotenuse and one other side. The distractor SAS would apply if two sides and the angle between those two sides were matched, but the right angle here lies between the 5 cm side and the third side, not between the 5 cm side and the hypotenuse. The distractor SSS needs all three pairs of sides matched, and only two sides of each triangle are given — the third side would first have to be calculated by Pythagoras, so SSS is not the condition the given facts supply. The distractor AAS would need two angles and a non-included side matched, but only one angle in each triangle is given.
- (c) (2, 1) — A point that lies on both mirror lines is fixed by each reflection individually, and so is fixed by the combination of the two — it is the intersection point of l1 and l2 that is invariant. Substituting x = 2 into y = x − 1 gives y = 2 − 1 = 1, so the intersection point is (2, 1). Forgetting the '− 1' in l2's equation and using y = x instead gives (2, 2). Making a sign error and computing y = x − (−1) = x + 1 instead gives (2, 3). Solving for x from an assumed y = 0 instead of substituting the given x = 2 gives (1, 0). Substitute x = 2 into l2's equation correctly, and the invariant point is (2, 1).
- (a) 314 cm² — Method: the area of a circle is πr², and the radius is half the diameter, so halve the 20 cm before squaring. Working: r = 20 ÷ 2 = 10 cm, so the area is 3.14 × 10² = 3.14 × 100 = 314. Answer: 314 cm². The distractors: 1256 cm² comes from putting the diameter straight into πr² without halving it, 3.14 × 20²; 628 cm² comes from halving correctly but then using 2πr², a mixture of the circumference and area formulae; 62.8 cm² comes from working out πd = 3.14 × 20, which is the circumference of the plate rather than its area.
- (b) 46.8 cm² — Method: for a parallelogram, not a triangle, the two sides and the angle between them give Area = ab sin C — there is no 1/2. Working: Area = 6 × 9 × sin 60° = 46.8 cm² (1 d.p.). Answer: 46.8 cm². Using the triangle formula, (1/2)ab sin C, on a parallelogram by mistake gives half the true area, 23.4 cm²; using cos 60° instead of sin 60° gives 27.0 cm²; and adding the two sides before multiplying by sin 60° gives 13.0 cm². A parallelogram is exactly two of the triangles this formula was built for, so never carry the 1/2 across from the triangle version.
- (a) 49° — Method: an exterior angle of a triangle equals the sum of the two interior angles that are not next to it, which here are the angles at A and at C; since those two are equal, the exterior angle is twice the angle at A. Working: 2 × angle A = 98, so angle A = 98 ÷ 2 = 49. Answer: 49°. The distractors: 82° is the interior angle at B, 180 − 98, given in place of the angle at A; 41° comes from finding that interior angle of 82° and halving it, 82 ÷ 2, instead of halving the exterior angle; 98° comes from taking the exterior angle to be equal to the angle at A on its own, with no halving at all.
- (a) 110° — The truss is isosceles, so its two base angles are equal; since the three angles of the triangle add up to 180° and the apex is 40°, each base angle is (180 − 40) ÷ 2 = 70°. The angle between the sloping edge and the joist, extended beyond the base of the truss, sits on a straight line with that 70° base angle, and angles on a straight line add up to 180°, so the required angle is 180 − 70 = 110°. "70°" comes from stopping after finding the base angle and giving it directly, without also using the straight-line fact to find the angle on the OUTSIDE of the truss. "140°" comes from doubling the base angle instead of using the straight-line fact. "20°" comes from taking half of the apex angle (40° ÷ 2), mistaking it for the required angle instead of properly using the triangle's angle sum.
- (b) £33.60 — The area of the parallelogram flower bed is base × height = 3.5 × 2 = 7 m². The cost is 7 × £4.80 = £33.60. £16.80 comes from using the triangle formula instead of the parallelogram formula: 3.5 × 2 = 7, and half of 7 is 3.5 m², then 3.5 × £4.80 = £16.80. £26.40 comes from adding the base and height, 3.5+2 = 5.5, instead of multiplying them, then multiplying by £4.80. £7.00 correctly finds the area, 7 m², but forgets to multiply it by the cost per m².
- (b) 10 — Corresponding angles are equal, so 5x + 4 = 3x + 24. Subtracting 3x from both sides gives 2x + 4 = 24, then subtracting 4 gives 2x = 20, so x = 10. 14 comes from adding the constants, 4 + 24, instead of subtracting them when rearranging. 19 comes from treating the angles as co-interior (summing to 180°): 5x + 4 + 3x + 24 = 180 gives 8x = 152, so x = 19. 20 correctly reaches 2x = 20 but stops without dividing by 2.
- (a) 7.7 m — AB is parallel to DC, so those two sides are each parallel to another side. BC and AD are stated to be not parallel to each other, so neither one is parallel to any other side — these are the two sides that need edging. Adding these: 3.2 + 4.5 = 7.7 m, so 7.7 m is correct. 7.6 m comes from an arithmetic slip when adding 3.2 and 4.5. 15.4 m comes from doubling the correct total, mistakenly assuming edging strip is needed along both faces of each side. 4.5 m comes from using only the longer of the two non-parallel sides and forgetting to add the shorter one.
- (b) 340 — The real length of the path is 8.5 × 2000 = 17000 cm, which converts to 170 m by dividing by 100. The cyclist rides the path there and back, so the total distance is 170 × 2 = 340 m. A candidate who forgets the return journey gives only the one-way distance, 170 m. A candidate who halves the one-way distance instead of doubling it, reading “there and back” as splitting the journey, gets 85 m. A candidate who doubles the scale factor to 4000 by mistake, getting a one-way length of 340 m, and then doubles that for the return journey, gets 680 m. The total distance the cyclist travels is 340 m.
- (a) 120° — Method: three sides are known, so use the cosine rule rearranged as cos A = (b² + c² − a²) ÷ 2bc, with a the side facing the angle wanted. Working: angle ABC lies between AB = 5 cm and BC = 3 cm and faces AC = 7 cm, so cos ABC = (5² + 3² − 7²) ÷ (2 × 5 × 3) = (25 + 9 − 49) ÷ 30 = −15 ÷ 30 = −0.5. The angle between 0° and 180° whose cosine is −0.5 is 180° − 60°. Answer: angle ABC = 120°. The distractors: 60° comes from taking the subtraction the other way round, (49 − 25 − 9) ÷ 30 = 0.5, which loses the minus sign that makes the angle obtuse; 90° comes from the instinct that three known sides always mean Pythagoras, and 5² + 3² = 34 is not 49, so the triangle is not right-angled; 150° comes from knowing the cosine is −0.5 but subtracting 30° from 180°, using the angle whose sine is 0.5 rather than the angle whose cosine is 0.5.
- (c) 18 — Method: divide the real length by 5 to find how many 'units' of 5 m it contains, then multiply by 2 cm for each unit. Working: 45 ÷ 5 = 9, so the real bridge is 9 lots of 5 m; each lot is represented by 2 cm on the model, so the model length is 9 × 2 = 18 cm. Options: 9 comes from stopping after the division, without multiplying by the 2 cm per unit; 90 comes from multiplying the real length by 2 directly, without dividing by 5 first; 4.5 comes from dividing by 5 and then dividing by 2 again, instead of multiplying by 2. Answer: 18.
- (a) No — the angle is not between the two sides — Method: check whether the given angle sits between the two given sides. Working: the 35° angle is marked away from the corner where the 40 cm and 65 cm edges meet, so it is not the included angle — this is SSA, which is not one of the four basic congruence conditions, so it does not guarantee congruence. Options: 'Yes — SAS' wrongly treats any two sides plus any angle as SAS, without checking the angle's position; 'Yes — SSS' wrongly counts the angle as if it were a third side; 'No — only two sides measured' is not the real reason, since SAS itself only needs two sides, so this reasoning is beside the point. Answer: no, the angle is not between the two sides.
Build your own mix at the worksheet builder.