Printable · GCSE Higher · ages 14-16
Geometry and measures worksheet — GCSE Higher
Fifteen questions across the geometry and measures statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Geometry and measures worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.A kite string makes an angle of 30° with the ground. The kite is flying at a height of 6 m directly above a point on the ground. Using the exact value of sin 30°, work out the exact length of the kite string.
- 2.A designer enlarges a drawing of a model car for a poster. She first enlarges the drawing by a scale factor of 1.5, and then enlarges that result by a further scale factor of 2. On the original drawing, the position of a wheel relative to the front bumper is given by the column vector with top number 4 and bottom number −3, in centimetres. What is the corresponding column vector on the poster, in centimetres?
- 3.A bead starts at position (2, −1) on a grid, in centimetres. It is moved by the column vector u, with top number 3 and bottom number 5, and then moved by the column vector v, with top number −7 and bottom number 2. Work out the coordinates of the bead's final position.
- 4.A circular garden pond has a diameter of 5 m. A gardener is laying gravel around it in a ring-shaped path 1 m wide, measured outward from the edge of the pond. Work out the area of the gravel path. Use π = 3.14.
- 5.A sector of a circle has an angle of 90° and an arc length of 15.7 cm. Using π = 3.14, work out the radius of the circle.
- 6.A ramp's sloped surface crosses two horizontal parallel rails. At the top rail, the angle between the ramp and the rail on the right of the ramp is (3x + 10)°. At the bottom rail, the angle between the ramp and the rail on the left of the ramp is (5x − 30)°. Work out the value of x.
- 7.A ship's radar shows a lighthouse at the point (12, −4) on a grid measured in nautical miles. The ship is at (2, 5). The ship sails along the vector that takes it directly to the lighthouse, then sails along that same vector again. Work out the ship's final position.
- 8.A student says the reverse of the translation vector is . Write down the correct reverse translation vector.
- 9.In triangle ABC, AB = 9 cm, angle BAC = 50° and the area of the triangle is 36 cm². Work out the length of AC. Give your answer to 1 decimal place.
- 10.A triangular sail for a small boat has two sides of 4.2 m and 3.6 m, with an angle of 115° between them. One litre of waterproofing paint covers 3 m² of sail. Work out the least number of whole tins of paint (1 litre each) needed to cover the sail.
- 11.A rectangular photograph has an area of 96 cm². One of its sides is 8 cm long. Work out the length of the other side.
- 12.A rotation of 200° clockwise about the origin is applied, and the image is then rotated 250° anticlockwise about the origin. Work out the single angle of rotation, measured clockwise and between 0° and 360°, that has the same overall effect as the two rotations combined.
- 13.Two identical ladders lean against the same vertical wall from opposite sides, each making an angle of 58.2° with the ground. The two ladders and the ground form a triangle. Work out the size of the angle between the two ladders at the top, where they meet.
- 14.A garden shed is shaped like a triangular prism: two identical vertical triangular end walls (the gable ends), joined by a sloping rectangular roof and a vertical rectangular back wall. Looking at the shed from directly above (the plan view), what shape is seen?
- 15.A rotation of 180° about the point (3, 2) can be written as a reflection in the line x = 3, followed by a reflection in a second line, for every point in the plane. Which line is the second line?
Answer key
- (b) 12 m — sin 30° = opposite ÷ hypotenuse, where the opposite side is the height (6 m) and the hypotenuse is the string. So string = height ÷ sin 30° = 6 ÷ (1/2) = 12 m. The distractor 3 m comes from multiplying by sin 30° instead of dividing (6 × 1/2 = 3). The distractor 6√3 m comes from using tan 30° = 1/√3 instead of sin 30° (6 ÷ (1/√3) = 6√3). The distractor 4√3 m comes from using cos 30° = √3/2 instead of sin 30° (6 ÷ (√3/2) = 12/√3 = 4√3).
- (b) (12, −9) — Two enlargements one after the other combine into a single scale factor: 1.5 × 2 = 3. Multiplying a vector by a scalar means multiplying both the top number and the bottom number by it: top = 4 × 3 = 12, bottom = −3 × 3 = −9, giving (12, −9). A candidate who adds the scale factor to each number instead of multiplying gets (4 + 3, −3 + 3) = (7, 0). A candidate who multiplies the top number but leaves the bottom number unchanged gets (12, −3). A candidate who multiplies the bottom number but leaves the top number unchanged gets (4, −9). The correct column vector for the poster is (12, −9).
- (d) (−2, 6) — Method: add the top numbers of both vectors to the starting x-coordinate, and the bottom numbers of both vectors to the starting y-coordinate. Working: x-coordinate 2 + 3 + (−7) = −2; y-coordinate −1 + 5 + 2 = 6. Answer: (−2, 6). A candidate who only applies vector u and forgets v gets (5, 4). A candidate who only applies vector v and forgets u gets (−5, 1). A candidate who works out the combined vector u + v but forgets to add it to the starting point gets (−4, 7).
- (b) 18.84 m² — The pond has radius 2.5 m (half of the 5 m diameter), so the outer edge of the path has radius 2.5 + 1 = 3.5 m. Path area = area of outer circle − area of pond = 3.14 × 3.5² − 3.14 × 2.5² = 38.465 − 19.625 = 18.84 m².
- (b) 10 cm — Arc length = (angle ÷ 360) × 2 × π × r, so 15.7 = (90 ÷ 360) × 2 × 3.14 × r = 1.57r, giving r = 15.7 ÷ 1.57 = 10 cm. (2.5 cm comes from forgetting the angle fraction and dividing by 2π alone; 20 cm comes from leaving out the factor of 2 in the arc length formula before dividing; 5 cm comes from dividing the arc length by π alone, ignoring both the angle fraction and the factor of 2.)
- (d) 20 — Alternate angles between parallel lines are equal, so 3x + 10 = 5x − 30. Rearranging, 10 + 30 = 5x − 3x, so 40 = 2x, and x = 20. −10 comes from a sign error when rearranging, moving a term to the wrong side and getting −20 = 2x instead. 25 comes from wrongly treating the two angles as co-interior and adding them to 180°: (3x + 10) + (5x − 30) = 180 gives 8x − 20 = 180, so x = 25. 47.5 makes the same co-interior mistake but sets the sum equal to 360° instead of 180°, giving 8x − 20 = 360 and x = 47.5.
- (b) (22, −13) — The vector from the ship to the lighthouse is (12, −4) − (2, 5) = (10, −9). Sailing along this vector twice from the start gives (2, 5) + 2 × (10, −9) = (2 + 20, 5 − 18) = (22, −13). '(12, −4)' stops after the ship reaches the lighthouse and ignores the second identical leg. '(−18, 23)' comes from finding the vector the wrong way round, as (2, 5) − (12, −4) = (−10, 9), and then doubling that. '(2, 5)' comes from adding the vector and then subtracting it again, wrongly cancelling the two legs instead of adding them.
- (c) $\binom{-4}{9}$ — The reverse of a translation negates both components, so the reverse of $\binom{4}{-9}$ is $\binom{-4}{9}$. $\binom{4}{9}$ is the student's mistake — only the bottom number has been negated, and the top number was left unchanged. $\binom{-4}{-9}$ makes the opposite error, negating only the top number. $\binom{4}{-9}$ is simply the original vector, unchanged.
- (c) 10.4 cm — Method: rearrange Area = (1/2)ab sin C to make the unknown side the subject: b = 2 × Area ÷ (a × sin C). Working: b = 2 × 36 ÷ (9 × sin 50°) = 10.4 cm (1 d.p.). Answer: 10.4 cm. Forgetting to double the area before dividing gives b = 36 ÷ (9 × sin 50°) = 5.2 cm; using cos 50° instead of sin 50° gives b = 2 × 36 ÷ (9 × cos 50°) = 12.4 cm; and multiplying by sin 50° instead of dividing by it — inverting the rearrangement — gives b = 2 × 36 × sin 50° ÷ 9 = 6.1 cm. Always double the area before dividing, and check whether the unknown should be multiplied or divided by sin C once you've rearranged.
- (a) 3 — Method: find the sail's area with Area = (1/2)ab sin C, then divide by how much one litre covers, and round up to a whole number of tins since paint can only be bought by the tin. Working: Area = 1/2 × 4.2 × 3.6 × sin 115° = 6.85 m² (2 d.p.); 6.85 ÷ 3 = 2.28 tins, which rounds up to 3 tins. Answer: 3. Rounding 2.28 to the nearest whole number instead of rounding up gives 2, which is not enough paint to finish the sail; forgetting the 1/2 in the area formula gives an area of 13.7 m², needing 5 tins; and assuming one litre covers exactly 1 m² of sail, ignoring the coverage rate given, rounds the area itself up to 7 tins. Whenever a quantity can only be bought in whole units, round up even when the decimal part is small — 2.28 tins means you need a third tin.
- (b) 12 cm — Method: the area of a rectangle is one side multiplied by the other, so when the area and one side are known the other side is found by reversing that multiplication — divide the area by the side that is known. Working: 96 ÷ 8 = 12. Answer: 12 cm. The distractors: 88 cm comes from 96 − 8, subtracting the known side as though the area had been made by adding the two sides together; 768 cm comes from 96 × 8, running the area rule forwards on the two numbers given instead of reversing it; 40 cm comes from reading the 96 as a perimeter — halving it to 48 and taking the 8 cm side away — which reverses the perimeter rule rather than the area rule.
- (a) 310° — Method: give the two rotations opposite signs since they turn in opposite senses — clockwise positive, anticlockwise negative — combine them into a single signed turn, then convert that turn into an angle measured clockwise between 0° and 360°. Working: the first rotation is 200° clockwise, so +200. The second is 250° anticlockwise, so −250. Combined: 200 − 250 = −50, meaning the net effect is a 50° turn anticlockwise. Measured clockwise instead, that same turn is 360 − 50 = 310°. Answer: 310°. Give the two rotations opposite signs before combining them, and convert a negative (anticlockwise) result into a clockwise angle by subtracting it from 360°, not from 180°: taking 50° away from a half turn gives 130°, which is a different rotation altogether; adding the two sizes as if both were clockwise gives 450°, which reduces to 90°; and reporting the anticlockwise size without converting it gives 50°.
- (d) 63.6 — Method: the three angles inside the triangle formed by the two ladders and the ground add up to 180°. Working: 180 − 58.2 − 58.2 = 63.6. Answer: 63.6°. A candidate who assumes the top angle equals the base angles gives 58.2. A candidate who subtracts only one base angle from 180°, working out 180 − 58.2, gets 121.8. A candidate who doubles the base angle instead of subtracting it twice from 180°, working out 2 × 58.2, gets 116.4.
- (d) a rectangle — The shed is a prism, so its two triangular ends are identical and parallel, a fixed distance apart along the shed's length; the floor they stand on is therefore bounded by the base of one triangle, the base of the other, and the two straight edges joining them — a rectangle. Looking straight down, the sloping roof projects onto that same rectangle rather than outside it, so the plan view is a plain rectangle, as long as the shed and as wide as its gable end. "a triangle" is the shape of the END wall, seen from the front or back, not from above. "a triangle with a rectangle attached" wrongly combines a side-elevation feature with the plan — the plan does not show the triangular end wall at all, since looking down hides it completely. "two triangles joined at their bases" describes neither the plan nor any single elevation of this shed.
- (d) y = 2 — Two reflections in perpendicular lines that cross at a point combine to a 180° rotation about that point. The line x = 3 is vertical, so the second line must be horizontal, and it must pass through the centre of rotation (3, 2) — that line is y = 2. Taking the y-coordinate of the centre but writing it against the wrong letter gives y = 3. Assuming the second line must also be vertical, like the first one, and just swapping in the other coordinate gives x = 2. Reaching for the standard mirror line y = x without checking that it actually passes through (3, 2) gives y = x — it does not pass through that point at all. The line that is both perpendicular to x = 3 and through (3, 2) is y = 2.
Build your own mix at the worksheet builder.