Printable · GCSE Higher · ages 14-16
Geometry and measures worksheet — GCSE Higher
Fifteen questions across the geometry and measures statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Geometry and measures worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.A circle has a diameter of 24 cm. A sector of this circle has an angle of 90°. Using π = 3.14, work out the area of the sector.
- 2.In triangle ABC, AB = 12 cm, AC = 9 cm and angle BAC = 55°. Work out the size of angle ABC. Give your answer to 1 decimal place.
- 3.The angle between north and a cycle path is 40°, but it is measured anticlockwise from north. What is the three-figure bearing of the cycle path?
- 4.Points A, B, C and D lie on a circle with centre O, in that order around the circle, and AC is a diameter. Which of the following circle facts does NOT apply to this diagram?
- 5.Line 1 passes through (0, 1) and (2, 5). Line 2 passes through (3, 2) and (5, 6). Work out the gradient of each line. Then write down whether the two lines are parallel.
- 6.A window is made from a rectangle with a semicircle on top. The rectangle is 40 cm wide and 60 cm tall. The semicircle has the same width as the rectangle. Work out the total area of the window. Use π = 3.14. Give your answer to the nearest whole number.
- 7.Two similar triangular tiles have lengths in the ratio 3 : 5. The longest side of the smaller tile is 9 cm. Work out the length of the longest side of the larger tile.
- 8.Two identical ladders lean against the same vertical wall from opposite sides, each making an angle of 58.2° with the ground. The two ladders and the ground form a triangle. Work out the size of the angle between the two ladders at the top, where they meet.
- 9.A cylinder has a radius of 3 cm and a height of 10 cm. Using π = 3.14, work out the volume of the cylinder.
- 10.A children's slide is built as a right-angled triangle: the vertical ladder side is 2.4 m, the horizontal base along the ground is 3.2 m, and the sloping slide is the third side. Work out the exact length of the sloping slide.
- 11.Lines JK and LM are parallel. A straight line crosses JK at point P and crosses LM at point Q. Angle KPQ = 118°. Angle KPQ and angle MQP are co-interior (allied) angles. Work out angle MQP.
- 12.In triangle ABC, AB = 8 cm, AC = 5 cm and angle BAC = 60°. Work out the value of BC².
- 13.In triangle ABC, point D lies on side AB and point E lies on side AC, so that DE is parallel to BC. AD = 3 cm, DB = 6 cm and DE = 4 cm. Work out the length of BC.
- 14.In triangle ABC, AB = 10 cm, BC = 7 cm and angle ACB = 35°. Given that angle BAC is acute, work out the length of AC. Give your answer to 1 decimal place.
- 15.Triangle ABC is drawn. The interior angle bisectors from vertices A and B are constructed and meet at point I inside the triangle. Which statement about point I must be true?
Answer key
- (b) 113.04 cm² — Sector area is (angle ÷ 360) × π × radius², and radius means the RADIUS, not the diameter: here the diameter is 24 cm, so the radius is 12 cm. The fraction is 90 ÷ 360 = 1/4, and 12² = 144, so the area is 0.25 × 3.14 × 144 = 113.04 cm². Using the diameter itself as if it were the radius gives 0.25 × 3.14 × 576 = 452.16 cm². Using the arc-length formula, 2 × π × radius, instead of the area formula gives 0.25 × 2 × 3.14 × 12 = 18.84 cm². Using the radius instead of its square gives 0.25 × 3.14 × 12 = 9.42 cm².
- (b) 47.2° — Method: two sides and the angle between them are given, so find the third side with the cosine rule and then use the sine rule for the angle. Working: BC² = 12² + 9² − 2 × 12 × 9 × cos 55° = 144 + 81 − 216 × 0.57358 = 225 − 123.89 = 101.11, so BC = 10.0552 cm. Angle ABC faces AC = 9 cm and the 55° angle faces BC = 10.0552 cm, so sin ABC = 9 × sin 55° ÷ 10.0552 = 7.3724 ÷ 10.0552 = 0.73318, and the inverse sine of 0.73318 is 47.154°. Since AC is not the longest side, angle ABC is not the largest angle and the acute value is the one that fits. Answer: angle ABC = 47.2° to 1 decimal place. The distractors: 77.8° comes from pairing the angle at B with AB = 12 cm, the side beside it, instead of AC = 9 cm, the side it faces, which actually produces angle ACB; 23.2° comes from a sign slip in the cosine rule step, 225 + 123.89 = 348.89, giving BC = 18.68 cm before the sine rule is applied; 37.9° comes from dividing by AB = 12 cm rather than by the side facing the 55° angle.
- (b) 320° — A bearing is always measured clockwise from north. An angle measured anticlockwise must be converted by subtracting it from 360°: 360 − 40 = 320°, so the bearing is 320°. Choosing 040° treats the anticlockwise angle as if it were already a clockwise bearing, without converting it. Choosing 220° adds 180° to the angle, mixing this up with a back-bearing calculation (40 + 180 = 220). Choosing 400° adds the angle to 360° instead of subtracting it (40 + 360 = 400), giving a bearing greater than a full turn.
- (c) Tangent-chord angle = angle in the alternate segment. — This diagram has a diameter AC, a centre O, and a cyclic quadrilateral ABCD, but no tangent anywhere in it. 'Angle in a semicircle = 90°' applies directly, because AC is a diameter. 'Opposite angles of a cyclic quadrilateral sum to 180°' applies directly, because ABCD is a cyclic quadrilateral. 'Angle at the centre = twice angle at circumference' applies directly, because O is given as the centre of the circle. The tangent-chord fact relates the angle between a tangent and a chord to an angle elsewhere in the circle, and since this diagram has no tangent, there is nothing in it for that fact to describe — so it is the one theorem that does not apply here.
- (a) Parallel, since both gradients are 2 — Gradient of line 1 = (5 − 1) ÷ (2 − 0) = 4 ÷ 2 = 2. Gradient of line 2 = (6 − 2) ÷ (5 − 3) = 4 ÷ 2 = 2. The two gradients are equal, so the lines are parallel. "Not parallel, since the gradients are 2 and 4" uses 4 for line 2, which comes from dividing the change in y, 4, by 1 rather than by the change in x, 5 − 3 = 2. "Not parallel, since the two lines cross the y-axis at different points" confuses parallel lines with the same line repeated — parallel lines are distinct lines, and where a line crosses the y-axis has no effect on its gradient. "Parallel, since both lines pass through positive coordinates" reaches the right conclusion for the wrong reason: lines are parallel because their gradients are equal, not because the coordinates given happen to be positive.
- (c) 3028 cm² — Split the window into a rectangle and a semicircle. Rectangle area = 40 × 60 = 2400 cm². The semicircle has radius 40 ÷ 2 = 20 cm, so its area = 0.5 × 3.14 × 20² = 628 cm². Total area = 2400 + 628 = 3028 cm². A student who uses a full circle instead of a semicircle on top of the rectangle gets 3.14 × 20² = 1256 cm² for the circle, plus 2400 cm² for the rectangle, totalling 3656 cm². A student who uses the rectangle's full width (40 cm) as the radius instead of halving it gets 0.5 × 3.14 × 40² = 2512 cm² for the semicircle, plus 2400 cm² for the rectangle, totalling 4912 cm².
- (c) 15 cm — Method: going from the smaller tile to the larger one, every length is multiplied by the scale factor 5 ÷ 3. Working: 9 ÷ 3 = 3, and 3 × 5 = 15. Answer: 15 cm. The distractors: 11 cm comes from adding the difference between the parts of the ratio, 5 − 3 = 2, to the 9 cm side, treating a ratio as a gap rather than a multiplier; 45 cm comes from multiplying by 5 and forgetting to divide by 3; 27 cm comes from multiplying by 3, which is the part of the ratio belonging to the smaller tile.
- (d) 63.6 — Method: the three angles inside the triangle formed by the two ladders and the ground add up to 180°. Working: 180 − 58.2 − 58.2 = 63.6. Answer: 63.6°. A candidate who assumes the top angle equals the base angles gives 58.2. A candidate who subtracts only one base angle from 180°, working out 180 − 58.2, gets 121.8. A candidate who doubles the base angle instead of subtracting it twice from 180°, working out 2 × 58.2, gets 116.4.
- (c) 282.6 cm³ — Volume of a cylinder = πr²h = 3.14 × 3² × 10 = 3.14 × 9 × 10 = 282.6 cm³. (94.2 cm³ comes from using πrh and forgetting to square the radius; 90 cm³ comes from using r²h and leaving π out altogether; 1130.4 cm³ comes from using the diameter, 6 cm, in place of the radius.)
- (d) 4 m — The sloping slide is the hypotenuse of a right-angled triangle with the other two sides 2.4 m and 3.2 m. By Pythagoras' Theorem, hypotenuse² = 2.4² + 3.2² = 5.76 + 10.24 = 16. Square root: √16 = 4 m. Adding the two sides instead of squaring them gives 2.4 + 3.2 = 5.6 m. Truncating each squared side to a whole number before adding (5.76 to 5 and 10.24 to 10) gives √15 ≈ 3.87 m. Forgetting to take the square root and leaving the sum of the squares as the answer gives 5.76 + 10.24 = 16, written as 16 m.
- (a) 62° — Angle KPQ and angle MQP are co-interior (allied) angles between parallel lines, so they add up to 180°: angle MQP = 180° − 118° = 62°. 118° comes from treating the angles as equal, as if this were a corresponding or alternate angle pair, instead of using the co-interior rule. 90° comes from wrongly assuming the crossing line meets JK and LM at right angles. 59° comes from halving 118° instead of subtracting it from 180°.
- (a) 49 cm² — Method: two sides and the angle between them are given, so use the cosine rule a² = b² + c² − 2bc cos A with BC facing the 60° angle. By hand, cos 60° = 0.5. Working: BC² = 8² + 5² − 2 × 8 × 5 × cos 60° = 64 + 25 − 80 × 0.5 = 89 − 40 = 49. Answer: BC² = 49 cm². The distractors: 129 cm² comes from adding the final term instead of subtracting it, 89 + 40; 89 cm² comes from leaving the cosine term out altogether and treating the 60° as though it were a right angle, so that Pythagoras applies; 69 cm² comes from forgetting the factor 2 in 2bc cos A and subtracting only 8 × 5 × 0.5 = 20.
- (d) 12 cm — Since DE is parallel to BC, triangle ADE is similar to triangle ABC (the two triangles share angle A, and the parallel lines make the angles at D and E equal to the angles at B and C). The whole side AB = AD + DB = 3 + 6 = 9 cm. The scale factor from the small triangle to the large triangle is AB ÷ AD = 9 ÷ 3 = 3, so BC = DE × 3 = 4 × 3 = 12 cm. Scaling by DB ÷ AD instead of AB ÷ AD gives 4 × (6 ÷ 3) = 8 cm. Adding DB directly onto DE, instead of scaling, gives 4 + 6 = 10 cm. Treating the triangles as congruent rather than similar, so assuming corresponding sides are simply equal, gives BC = DE = 4 cm.
- (d) 14.9 cm — By the sine rule, sin(BAC) ÷ BC = sin(ACB) ÷ AB, so sin(BAC) = 7 × sin35° ÷ 10 = 0.4015. This gives angle BAC = 23.7° or angle BAC = 156.3°; since angle BAC is acute, angle BAC = 23.7°. Angle ABC = 180° − 35° − 23.7° = 121.3°. By the sine rule again, AC ÷ sin(ABC) = AB ÷ sin(ACB), so AC = 10 × sin121.3° ÷ sin35° = 14.9 cm. Using angle BAC in the final step instead of angle ABC gives AC = 10 × sin23.7° ÷ sin35° = 7.0 cm — this just recomputes the given side BC. Using angle ACB again in the final step, instead of the newly found angle ABC, gives AC = 10 × sin35° ÷ sin35° = 10.0 cm — this just returns AB unchanged. Making a sign slip when finding angle ABC, computing 180° − 35° + 23.7° = 168.7° instead of subtracting it, and carrying that through gives AC = 10 × sin168.7° ÷ sin35° = 3.4 cm. Find angle BAC, then angle ABC, then apply the sine rule once more, and AC comes to 14.9 cm.
- (c) I is the same distance from all three sides. — The angle bisector from A is the locus of points equidistant from sides AB and AC, and the angle bisector from B is the locus of points equidistant from sides AB and BC. Point I lies on both bisectors, so I is equidistant from AB and AC, and also equidistant from AB and BC — meaning I is the same distance from all three sides. (Being the same distance from all three vertices instead describes the circumcentre, found from the perpendicular bisectors of the sides, not the angle bisectors; I being the midpoint of AB confuses the angle bisector construction with the perpendicular bisector of a side; I lying on side AC is wrong because the angle bisectors meet inside the triangle, not on one of its sides.)
Build your own mix at the worksheet builder.