Printable · GCSE Higher · ages 14-16
Geometry and measures worksheet — GCSE Higher
Fifteen questions across the geometry and measures statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Calculator
Answer key: Geometry and measures worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (a) 3 — Method: find the sail's area with Area = (1/2)ab sin C, then divide by how much one litre covers, and round up to a whole number of tins since paint can only be bought by the tin. Working: Area = 1/2 × 4.2 × 3.6 × sin 115° = 6.85 m² (2 d.p.); 6.85 ÷ 3 = 2.28 tins, which rounds up to 3 tins. Answer: 3. Rounding 2.28 to the nearest whole number instead of rounding up gives 2, which is not enough paint to finish the sail; forgetting the 1/2 in the area formula gives an area of 13.7 m², needing 5 tins; and assuming one litre covers exactly 1 m² of sail, ignoring the coverage rate given, rounds the area itself up to 7 tins. Whenever a quantity can only be bought in whole units, round up even when the decimal part is small — 2.28 tins means you need a third tin.
- (c) 56.52 cm² — Sector area = (45 ÷ 360) × 3.14 × 12² = 0.125 × 3.14 × 144 = 56.52 cm². (4.71 cm² comes from forgetting to square the radius; 452.16 cm² comes from finding the area of the whole circle and forgetting the angle fraction; 9.42 cm² comes from using the arc length formula instead of the sector area formula.)
- (b) 7.4 — Method: AB is opposite angle ACB and AC is opposite angle ABC, so the sine rule gives AB/sin(ACB) = AC/sin(ABC). Working: (2x + 1)/sin 48° = (3x − 2)/sin 72°; cross-multiplying and collecting the x terms gives x = 7.4. Using angle BAC = 180° − 72° − 48° = 60° in place of angle ABC in the ratio gives x = 4.7; ignoring the sine rule altogether and solving 2x + 1 = 3x − 2 as if the two sides were simply equal gives x = 3.0; and pairing each side with the wrong angle — AB with sin 72° and AC with sin 48° — gives x = 1.9. Each side in the sine rule must be paired with the sine of the angle directly opposite it.
- (c) Two angles and one side are known; x is another side — The sine rule needs a matching pair, a side and the angle opposite it, that you already know, so you can set up a ratio with the unknown. When two angles and one side are known, you can find the third angle from the angle sum, giving you an angle opposite the known side and an angle opposite x: the sine rule applies directly. When all three sides are known and x is an angle, there is no side-angle pair available at all, so the cosine rule, rearranged for an angle, is what's needed instead. When two sides and the included angle are known and x is the third side, again there is no matching side-angle pair yet, so the cosine rule finds the third side directly. When two sides and the included angle are known and x is one of the other angles, you still have no side-angle pair to start from — the cosine rule has to be used first, to find the third side, before any angle can be found. Only the two-angles-and-a-side case hands you a ready-made pair, which is exactly what the sine rule needs.
- (d) 63.6 — Method: the three angles inside the triangle formed by the two ladders and the ground add up to 180°. Working: 180 − 58.2 − 58.2 = 63.6. Answer: 63.6°. A candidate who assumes the top angle equals the base angles gives 58.2. A candidate who subtracts only one base angle from 180°, working out 180 − 58.2, gets 121.8. A candidate who doubles the base angle instead of subtracting it twice from 180°, working out 2 × 58.2, gets 116.4.
- (c) 12.4 cm — Using the cosine rule, BC² = AB² + AC² − 2 × AB × AC × cos(A) = 9² + 6² − 2 × 9 × 6 × cos(110°) = 81 + 36 − 108 × cos(110°). Since cos(110°) ≈ −0.34202, 108 × cos(110°) ≈ −36.94, so BC² ≈ 117 + 36.94 = 153.94. Taking the square root, BC ≈ 12.4072, which rounds to 12.4 cm. 8.9 cm comes from treating cos(110°) as if it were positive (using +0.342 instead of −0.342), which wrongly subtracts instead of adds and gives BC² ≈ 80.06. 153.9 cm is BC² itself, rounded, with the square root never taken. 11.6 cm comes from leaving out the factor of 2 in the formula, computing BC² = 81 + 36 − 9 × 6 × cos(110°) ≈ 135.47 instead.
- (a) 151 cm³ — Volume of the cone = 1/3 × 3.14 × 3² × 10 = 94.2 cm³. Volume of the hemisphere = 1/2 × (4/3 × 3.14 × 3³) = 1/2 × 113.04 = 56.52 cm³. Total volume = 94.2 + 56.52 = 150.72 cm³, which rounds to 151 cm³. A student who uses a full sphere instead of a hemisphere gets 94.2 + 113.04 = 207.24 cm³, rounding to 207. A student who uses a cylinder instead of a cone for the base, forgetting the 1/3, gets 3.14 × 3² × 10 = 282.6 cm³, plus the hemisphere's 56.52 cm³, totalling 339.12 cm³, rounding to 339.
- (a) 28.6 m — The perimeter of a sector is the two straight radii plus the curved arc. This sector's 90° angle is one quarter of a full turn, so its arc length is one quarter of the full circle's circumference. The full circumference is 2 × 3.14 × 8 = 50.24 m, and one quarter of that is 50.24 ÷ 4 = 12.56 m. Add the two 8 m radii: 12.56 + 8 + 8 = 28.56 m, which rounds to 28.6 m. Choosing 12.6 m gives the arc length alone (rounded), forgetting the two straight edges of the sector. Choosing 20.6 m adds only one radius to the arc length instead of two, missing one of the two straight sides. Choosing 41.1 m comes from using the diameter, 16 m, as if it were the radius when working out the arc length (2 × 3.14 × 16 = 100.48, one quarter of which is 25.12), then adding the two correct 8 m radii (25.12 + 8 + 8 = 41.12).
- (a) 615.44 cm² — Method: the surface area of a sphere is 4πr². Square the radius, multiply by π, then multiply by 4. Working: r² = 7² = 49, then 3.14 × 49 = 153.86, then 4 × 153.86 = 615.44. Answer: 615.44 cm². The distractors: 153.86 cm² comes from stopping at πr², which is the area of a flat circle of radius 7 cm and leaves out the factor of 4 that a curved surface needs; 87.92 cm² comes from 4 × 3.14 × 7, using the radius itself where the formula asks for its square; 1436.03 cm³ comes from working out the volume of the ball with (4 ÷ 3) × π × r³ instead of its surface area, which is a different measure and carries a cubic unit.
- (a) 104° — Method: find each inscribed angle separately using the angle-at-the-centre theorem: for a point on the arc NOT cut off by the given central angle, halve that central angle; for a point on the OTHER arc, halve the REFLEX central angle instead; then subtract the smaller from the larger. Working: for C on the major arc, angle ACB = 76 ÷ 2 = 38 degrees. For D on the minor arc, D sees the reflex angle at the centre, 360 − 76 = 284 degrees, so angle ADB = 284 ÷ 2 = 142 degrees. The difference is 142 − 38 = 104 degrees. Answer: 104°. Both inscribed angles need the theorem applied separately, using the correct arc's central angle each time (the reflex angle for D), and the question asks for the DIFFERENCE between the two, not either angle on its own and not their sum, 180°, which is simply the opposite-angle total for the cyclic quadrilateral ACBD.
- (d) £48 — Scale factor = new width ÷ original width = 40 ÷ 10 = 4. Poster height = 15 × 4 = 60 cm. Cost = 60 × £0.80 = £48. (£12 comes from forgetting to scale the height at all, and pricing the original 15 cm height; £15.20 comes from adding the scale factor 4 to the height instead of multiplying by it; £3 comes from dividing the height by the scale factor instead of multiplying by it.)
- (c) 460 g — Each division is 20 g, so three divisions past the mark is 3 × 20 = 60 g. Adding this to the 400 g mark gives 400 + 60 = 460 g. Treating each division as worth 1 g instead of 20 g gives 400 + 3 = 403 g. Working out the extra amount correctly but forgetting to add the 400 g mark gives just 60 g. Treating each division as worth 10 g instead of 20 g gives 400 + 30 = 430 g.
- (c) 49.5 m² — Method: the area formula needs two sides and the angle between them, and only sides are given, so find one angle with the cosine rule first and then use the two sides that enclose it. Working: angle ABC lies between AB = 14 m and BC = 9 m, so cos ABC = (14² + 9² − 11²) ÷ (2 × 14 × 9) = (196 + 81 − 121) ÷ 252 = 156 ÷ 252 = 0.61905, giving angle ABC = 51.753° and sin ABC = 0.78535. The area is then 1/2 × 14 × 9 × 0.78535 = 63 × 0.78535 = 49.477. Answer: the area is 49.5 m² to 1 decimal place. The distractors: 60.5 m² comes from using the correct angle at B with the sides 14 m and 11 m, which do not both meet at B, so the angle is no longer the one they enclose; 63.0 m² comes from leaving the sine out and treating the two sides as a base and a perpendicular height; 40.5 m² comes from working out angle BAC = 39.98° instead and using its sine with the sides that meet at B, so that the angle used is not the angle between them.
- (c) It is a parallelogram but not a rectangle — Method: match the given properties to the definition of each named quadrilateral. Working: having both pairs of opposite sides parallel and equal in length is exactly the definition of a parallelogram; since none of the angles are right angles, it cannot also be a rectangle, which needs four right angles. Options: 'must be a rectangle' wrongly assumes every parallelogram has right angles; 'must be a rhombus' wrongly assumes equal opposite sides means all four sides are equal, but only the opposite pairs are stated as equal here; 'trapezium' is wrong because a trapezium has exactly one pair of parallel sides, while this shape has two pairs, so it is a parallelogram and not a trapezium. Answer: it is a parallelogram but not a rectangle.
- (b) (0, 2) — Method: to rotate about a point that is not the origin, first subtract the centre's coordinates, apply the rotation rule to the shifted point, then add the centre's coordinates back on; only after that do you apply the translation, in the order the question states them. Working: shifting P relative to the centre gives (6 − 1, 4 − 2) = (5, 2); rotating 90° clockwise sends (x, y) to (y, −x), giving (2, −5); adding the centre back on gives (2 + 1, −5 + 2) = (3, −3); applying the translation (−3, 5) gives (3 − 3, −3 + 5) = (0, 2). Answer: (0, 2). Applying the translation BEFORE the rotation, reversing the order the question gives them in, gives (8, 0); stopping after the rotation and forgetting the translation altogether gives (3, −3); and rotating anticlockwise instead of clockwise, using (x, y) → (−y, x), gives (−4, 12). Always carry out the two transformations in the order stated — rotate about the given centre first, then translate — and check each step before moving to the next.
Build your own mix at the worksheet builder.