Printable · GCSE Higher · ages 14-16
Geometry and measures worksheet — GCSE Higher
Fifteen questions across the geometry and measures statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Calculator
Answer key: Geometry and measures worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (c) 1 : 300 — First convert both lengths to the same unit: 15 m = 1500 cm. The scale compares 5 cm on the drawing to 1500 cm in real life, so dividing both parts by 5 gives a scale of 1 : 300. A candidate who compares 5 to 15 without converting units gets 1 : 3. A candidate who converts 15 m to 150 cm, using the wrong conversion factor, gets 1 : 30. A candidate who converts 15 m to 15000 cm, again using the wrong conversion factor, gets 1 : 3000. The scale of the drawing is 1 : 300.
- (d) 110.1° — Method: the largest angle in any triangle faces the longest side, so identify that angle first and then use the cosine rule rearranged as cos A = (b² + c² − a²) ÷ 2bc. Working: the longest side is AC = 12.8 cm, which is faced by angle ABC, and the two sides meeting at B are 6.4 cm and 9.1 cm, so cos ABC = (6.4² + 9.1² − 12.8²) ÷ (2 × 6.4 × 9.1) = (40.96 + 82.81 − 163.84) ÷ 116.48 = −40.07 ÷ 116.48 = −0.34401. A negative cosine means an obtuse angle, and the inverse cosine of −0.34401 is 110.12°. Answer: the largest angle is 110.1° to 1 decimal place. The distractors: 28.0° is the angle facing the shortest side, chosen by a candidate who thinks the largest angle sits opposite the smallest side; 69.9° comes from dropping the minus sign and using cos = 0.34401, which turns the obtuse angle into its supplement; 81.4° comes from assuming the angles share out 180° in the same ratio as the sides, 180 × 12.8 ÷ 28.3, which is not how a triangle behaves.
- (d) 18.8 cm — Arc length is a fraction of the full circumference. Here 120 ÷ 360 = 1/3, and the full circumference is 2 × 3.14 × 9 = 56.52 cm, so the arc is 56.52 ÷ 3 = 18.84 cm, which rounds to 18.8 cm. Forgetting the fraction and giving the full circumference rounds to 56.5 cm. Using 9 cm as a diameter instead of a radius gives an arc of 9.4 cm. Using 120 ÷ 180 instead of 120 ÷ 360 for the fraction gives an arc of 37.7 cm.
- (c) 56.52 cm² — Sector area = (45 ÷ 360) × 3.14 × 12² = 0.125 × 3.14 × 144 = 56.52 cm². (4.71 cm² comes from forgetting to square the radius; 452.16 cm² comes from finding the area of the whole circle and forgetting the angle fraction; 9.42 cm² comes from using the arc length formula instead of the sector area formula.)
- (b) 25 minutes — Method: a rate in litres per minute can only be used on a volume measured in litres, so convert the tank first and then divide. Working: 1 m³ = 1000 litres, so the tank holds 0.45 × 1000 = 450 litres, and the time is 450 ÷ 18 = 25. Answer: 25 minutes. Using 1 m³ = 100 litres gives 45 ÷ 18 = 2.5 minutes. Using 1 m³ = 1 000 000 litres, which is the factor that turns cubic metres into cubic centimetres, gives 450 000 ÷ 18 = 25 000 minutes. Multiplying by the rate instead of dividing by it gives 450 × 18 = 8100.
- (c) 62.9 cm² — Method: no two sides are given, so first find AC with the sine rule, then find the area using BC, AC and the angle between them, angle ACB. Working: angle BAC = 180° − 58° − 47° = 75°; by the sine rule, AC = 14 × sin 58° / sin 75° = 12.2915 cm; then area = 1/2 × 14 × 12.2915 × sin 47° = 62.9 cm² — keep the unrounded AC, since rounding it to 12.3 cm shifts the area to 63.0 cm². Pairing 14 with sin 75° and dividing by sin 58° instead (the ratio the wrong way round) gives AC = 15.9 cm and an area of 81.6 cm²; using angle BAC = 75° as the included angle instead of angle ACB gives 83.1 cm²; and assuming the triangle is isosceles with AC = BC = 14 cm, skipping the sine rule step entirely, gives 71.7 cm². The angle used in the area formula must be the one between the two sides being multiplied — here that is angle ACB, between BC and AC.
- (c) 64.4 cm² — Method: with two sides and the angle between them, use Area = (1/2)ab sin C. Working: Area = 1/2 × 15.6 × 8.9 × sin 112° = 64.4 cm² (1 d.p.). Answer: 64.4 cm². Leaving out the 1/2 gives 128.7 cm²; using cos 112° instead of sin 112° gives a negative value, which a candidate who drops the minus sign reads as 26.0 cm²; and squaring one side instead of multiplying the two different given sides together gives 112.8 cm². Sin C is never negative for an angle between 0° and 180°, so a negative area is always a sign that cos was used by mistake — check you used sin before you trust your answer.
- (c) 12.4 cm — Using the cosine rule, BC² = AB² + AC² − 2 × AB × AC × cos(A) = 9² + 6² − 2 × 9 × 6 × cos(110°) = 81 + 36 − 108 × cos(110°). Since cos(110°) ≈ −0.34202, 108 × cos(110°) ≈ −36.94, so BC² ≈ 117 + 36.94 = 153.94. Taking the square root, BC ≈ 12.4072, which rounds to 12.4 cm. 8.9 cm comes from treating cos(110°) as if it were positive (using +0.342 instead of −0.342), which wrongly subtracts instead of adds and gives BC² ≈ 80.06. 153.9 cm is BC² itself, rounded, with the square root never taken. 11.6 cm comes from leaving out the factor of 2 in the formula, computing BC² = 81 + 36 − 9 × 6 × cos(110°) ≈ 135.47 instead.
- (d) 7 cm — Area of a parallelogram = base × height, so height = area ÷ base = 84 ÷ 12 = 7 cm. A pupil who multiplies instead of dividing gets 84 × 12 = 1008 cm. A pupil who divides the base by the area instead of the area by the base gets 12 ÷ 84 ≈ 0.14 cm. A pupil who mistakenly halves the area first, as if this were a triangle, gets (84 ÷ 2) ÷ 12 = 3.5 cm. The correct height is 7 cm.
- (b) 63° — Method: a tangent meets the radius drawn to the point of contact at a right angle, so triangle OPT has a 90° angle at T; the three angles of the triangle then sum to 180°. Working: angle OTP = 90°, angle OPT = 27°, so angle POT = 180 − 90 − 27 = 63 degrees. Answer: 63°. The tangent-radius angle is a fixed 90°, not something to assume equal to another angle in the triangle, and the three angles of ANY triangle sum to 180°, never 360°: that total belongs to a quadrilateral, not a triangle.
- (d) 114.6° — Method: rearrange Area = (1/2)ab sin C to make sin C the subject, then use the obtuse branch since the question states the angle is obtuse. Working: sin C = 2 × 45 ÷ (11 × 9) = 0.909, so the acute angle is sin⁻¹(0.909) = 65.4°, and the obtuse angle is 180 − 65.4 = 114.6°. Answer: 114.6°. Giving the acute angle straight from the calculator, 65.4°, ignores that the question asks for the obtuse one; forgetting to double the area before dividing gives sin C = 45 ÷ (11 × 9) = 0.4545, whose obtuse angle is 180 − 27.0 = 153.0°; and that same forgotten-doubling error taken on the acute branch instead gives 27.0°. Always double the area first, and then take 180° minus the calculator's answer whenever the question specifically asks for the obtuse angle.
- (c) 49.5 m² — Method: the area formula needs two sides and the angle between them, and only sides are given, so find one angle with the cosine rule first and then use the two sides that enclose it. Working: angle ABC lies between AB = 14 m and BC = 9 m, so cos ABC = (14² + 9² − 11²) ÷ (2 × 14 × 9) = (196 + 81 − 121) ÷ 252 = 156 ÷ 252 = 0.61905, giving angle ABC = 51.753° and sin ABC = 0.78535. The area is then 1/2 × 14 × 9 × 0.78535 = 63 × 0.78535 = 49.477. Answer: the area is 49.5 m² to 1 decimal place. The distractors: 60.5 m² comes from using the correct angle at B with the sides 14 m and 11 m, which do not both meet at B, so the angle is no longer the one they enclose; 63.0 m² comes from leaving the sine out and treating the two sides as a base and a perpendicular height; 40.5 m² comes from working out angle BAC = 39.98° instead and using its sine with the sides that meet at B, so that the angle used is not the angle between them.
- (c) 151,200 cm² — First find the area in m²: 4.2 × 3.6 = 15.12 m². To convert m² to cm², multiply by 10,000, since 1 m² = 100 cm × 100 cm = 10,000 cm²: 15.12 × 10,000 = 151,200 cm². 15.12 cm² gives the area in m² without converting the units at all. 1,512 cm² multiplies by 100 instead of 10,000, treating the conversion as if it were for a single length rather than an area. 15,120 cm² multiplies by 1,000 instead of 10,000.
- (a) £94.58 — Method: find the area with 1/2ab sin C, then multiply by the cost per square metre. Working: area = 1/2 × 1.8 × 1.3 × sin 72° = 1.11274 m², so cost = 1.11274 × £85 = £94.58. Leaving out the 1/2 gives an area of 2.22547 m² and a cost of £189.17; using cos 72° instead of sin 72° gives a cost of £30.73; and rounding the area to 1 decimal place (1.1 m²) before multiplying by the cost per square metre gives £93.50, which loses accuracy that the final answer needs. Even rounding to 1.113 m² is enough to shift the cost to £94.61 — keep the unrounded area in your calculator until the very last step.
- (a) 8.1 m — Multiply the length on the plan by the scale factor: 4.5 × 1.8 = 8.1, so the real length is 8.1 m. Choosing 6.3 m adds the two numbers instead of multiplying them (4.5 + 1.8 = 6.3). Choosing 2.5 m divides the plan length by the scale factor the wrong way round (4.5 ÷ 1.8 = 2.5) instead of multiplying. Choosing 9.0 m rounds the scale factor up to 2 before multiplying (4.5 × 2 = 9.0), losing the accuracy the 1.8 was giving.
Build your own mix at the worksheet builder.