Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.A lorry travels 105 miles in 1 hour 45 minutes. Work out its average speed in miles per hour.
- 2.A length, L cm, has the error interval 24.5 ≤ L < 25.5. Write down the degree of accuracy to which the length was measured.
- 3.A rectangular patio measures 90 cm by 120 cm. Ben wants to cover it exactly with identical square tiles, as large as possible, with no tiles cut. Work out the side length of the largest square tile he can use.
- 4.Expand and simplify √3(2 + √12).
- 5.Work out 1 1/2 ÷ 3/4 exactly, giving your answer in its simplest form.
- 6.By first working out 2.9², then squaring your result, estimate 2.9⁴ to 2 significant figures.
- 7.Write 5,000,000 in standard form.
- 8.Meera says that 0.7 ÷ 0.1 = 0.07. Work out the correct value of 0.7 ÷ 0.1.
- 9.Work out how many factors 100 has.
- 10.A concrete mix is made from cement and sand in the ratio 3 : 5 by mass. A builder mixes 96 kg of concrete. Work out the mass of cement in the mix.
- 11.A necklace is made from red beads and gold beads in the ratio 7 : 3. What fraction of the beads are gold?
- 12.A cinema has 250 seats. 12% of the seats are reserved. Work out how many of the seats are reserved.
- 13.Work out (−2)² − 3
- 14.A number is multiplied by 4, then 8 is added, giving the result 40. Work out the number.
- 15.Maya buys 4 plants at £3.20 each and a bag of compost for £6.75. She pays with a £20 note. Work out her change.
Answer key
- (d) 60 mph — Average speed = distance ÷ time, with the time measured in hours. 45 minutes is 45/60 of an hour, which is 0.75 of an hour, so the journey takes 1.75 hours. Speed = 105 ÷ 1.75 = 60 mph. 52.5 mph rounds the time up to 2 hours, 72.4 mph writes 1 hour 45 minutes as 1.45 hours, and 183.75 mph multiplies the distance by the time instead of dividing.
- (a) to the nearest centimetre — Method: the error interval of a rounded measurement runs from half a unit below the stated value to half a unit above it, so the width of the interval is one whole unit of the accuracy used. Working: the interval runs from 24.5 to 25.5, a width of 25.5 − 24.5 = 1, so the unit of accuracy is 1 cm; the stated value is the midpoint, 25 cm, and 25 correct to the nearest centimetre is exactly what gives 24.5 ≤ L < 25.5. Answer: to the nearest centimetre. To the nearest 0.5 cm comes from reading the half-unit, 0.5, as the accuracy itself instead of doubling it back to the full unit. To 1 decimal place comes from seeing the bounds written with one decimal place and taking that as the accuracy, but the bounds of a value given to 1 decimal place would be only 0.05 either side. To the nearest 10 cm comes from confusing the size of the value, about 25, with the unit it was rounded to; rounding to the nearest 10 cm would give an interval 5 cm either side of the stated value.
- (a) 30 cm — The tile's side length must be a common factor of 90 and 120. The factors of 90 include 1, 2, 3, 5, 6, 9, 10, 15, 18, 30, 45, 90; the factors of 120 include 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 20, 24, 30, 40, 60, 120. The highest number common to both lists is 30, so the largest square tile has a side length of 30 cm. Picking 15 cm, a common factor but not the largest, gives tiles that are smaller than necessary. Picking 10 cm, also a common factor but smaller still, wastes even more of the possible tile size. Working out the lowest common multiple instead of the highest common factor gives 360 cm, a length far bigger than either side of the patio. So the largest square tile Ben can use has a side length of 30 cm.
- (d) 6 + 2√3 — Multiply √3 by each term in the bracket separately. First term: √3 × 2 = 2√3. Second term: √3 × √12 = √(3 × 12) = √36 = 6. Adding the two results in the order they were found, and writing the whole-number term first, gives 6 + 2√3. Adding the numbers under the root for the second term instead of multiplying them (3 + 12 = 15) gives √15 in place of 6, leading to √15 + 2√3. Multiplying √3 by the 2 but never distributing to the √12 term at all leaves just 2√3. Treating √3 × 2 as if the 3 were multiplied by the 2 inside the root, √3 × 2 → √6, while still getting the second term correct, gives 6 + √6.
- (c) 2 — First write 1 1/2 as an improper fraction, 3/2. To divide by 3/4, multiply by its reciprocal, 4/3: 3/2 × 4/3 = 12/6 = 2. Dropping the whole number and dividing only the fractional part, 1/2 ÷ 3/4 = 1/2 × 4/3, gives 2/3. Multiplying by 3/4 directly instead of using its reciprocal, 3/2 × 3/4, gives 9/8. Using the reciprocal of the first fraction instead of the second, 2/3 × 3/4, gives 1/2.
- (a) 71 — 2.9⁴ = (2.9²)². First, 2.9² = 8.41. Then square that: 8.41² = 70.7281, since 841² = 707281 and the decimal point moves four places. To 2 significant figures this rounds to 71, because the figure after the first two significant figures (7 and 0) is a 7, which rounds the 0 up to 1. Rounding the working down instead of up — taking 70.7281 to 70 — ignores that the next figure is 5 or more. Rounding 2.9 up to 3 before doing any working at all, then computing 3⁴ = 81, uses a much cruder approximation and overshoots the true value. Rounding 8.41 all the way down to 8 before squaring, 8² = 64, rounds far too aggressively and loses the accuracy needed for 2 significant figures.
- (c) 5 × 10⁶ — Method: standard form is written as A × 10ⁿ, where A is at least 1 and less than 10 and n counts the places the decimal point moves. Working: the digits of 5,000,000 give a coefficient of A = 5, and the decimal point travels from the end of 5,000,000 until it sits just after the 5, a move of 6 places, so n = 6. Answer: 5 × 10⁶. The distractors: 50 × 10⁵ comes from stopping before the coefficient has been brought into range, and 50 is not less than 10, so it is not standard form; 5 × 10⁷ comes from counting the seven digits of 5,000,000 instead of the six places the decimal point moves; 5 × 10⁻⁶ comes from making the index negative because the decimal point was carried to the left, when a negative index belongs to a number smaller than 1.
- (a) 7 — Dividing by 0.1 is the same as multiplying by 10, so 0.7 ÷ 0.1 = 7. Meera's answer of 0.07 comes from dividing 0.7 by 10 instead of by 0.1, the wrong way round. A candidate who confuses 0.1 with 0.01 multiplies by 100 instead of 10 and gets 70. A candidate who thinks dividing by a number less than 1 does not change the value gets 0.7.
- (c) 9 — Method: factors come in pairs that multiply to give the number, so work through the pairs in order; a factor paired with itself is counted only once. Working: the pairs are 1 × 100, 2 × 50, 4 × 25, 5 × 20 and 10 × 10. The first four pairs give eight different factors, and the last pair adds only one more, so the factors are 1, 2, 4, 5, 10, 20, 25, 50 and 100. Answer: 9. The distractors: 10 comes from counting the pair 10 × 10 as two separate factors; 8 comes from leaving 1 out of the list, on the view that 1 is not a proper factor; 4 comes from writing 100 = 2² × 5² and multiplying the two indices together instead of adding 1 to each index first.
- (a) 36 kg — The mix is 3 + 5 = 8 equal shares, so the cement is 3/8 of the mass. One share is 96 ÷ 8 = 12 kg, and the cement is 3 shares: 3 × 12 = 36 kg. Working out 3/5 of 96 gives 57.6 kg, which uses the sand as the denominator instead of the whole mix; 60 kg is the mass of the sand; 12 kg is one share only.
- (d) 3/10 — Total parts = 7 + 3 = 10. Gold beads are 3 of those 10 parts, so the fraction is 3/10. 7/10 comes from finding the fraction of red beads instead of gold beads. 7/3 comes from writing the ratio itself as a fraction, without adding the parts to find the total. 3/7 comes from comparing gold beads with red beads instead of with the total number of beads.
- (b) 30 — Method: 12% of an amount is 12/100 of it, so find 1% by dividing by 100 and then multiply by 12. Working: 1% of 250 is 250 ÷ 100 = 2.5, and 12% is 2.5 × 12 = 30. Answer: 30 seats. The distractors: 3 comes from writing 12% as 0.012 instead of 0.12, giving 0.012 × 250 = 3; 25 comes from finding 10% of the seats and stopping there; 24 comes from counting 12 seats for each whole hundred, 12 + 12 = 24, and ignoring the remaining 50 seats.
- (b) 1 — Method: BIDMAS deals with the index before the subtraction, and a negative number multiplied by itself gives a positive result. Working: (−2)² = (−2) × (−2) = 4, so the calculation becomes 4 − 3 = 1. Answer: 1. The distractors: −7 comes from squaring only the 2 and leaving the minus sign outside the index, giving −(2²) − 3 = −4 − 3 = −7; −1 comes from subtracting the square from 3 instead of 3 from the square, giving 3 − 4 = −1; 25 comes from carrying out the subtraction before the index, giving (−2 − 3)² = (−5)² = 25.
- (a) 8 — To undo 'multiply by 4, then add 8', reverse the operations in reverse order: subtract 8 first, then divide by 4. 40 − 8 = 32, and 32 ÷ 4 = 8, so the number is 8. A candidate who added 8 again instead of subtracting worked out 40 + 8 = 48, then 48 ÷ 4 = 12. A candidate who divided before subtracting, doing the inverse operations in the wrong order, worked out 40 ÷ 4 = 10, then 10 − 8 = 2. A candidate who multiplied instead of dividing at the last step worked out (40 − 8) × 4 = 32 × 4 = 128.
- (c) £0.45 — Method: find the total cost, then subtract from £20. Working: 4 × £3.20 = £12.80. £12.80 + £6.75 = £19.55. Change = £20.00 − £19.55 = £0.45. Answer: £0.45. (£7.20 comes from forgetting to include the compost and subtracting only the plants' cost from £20. £1.45 comes from dropping the carry when adding the pence: 80p + 75p = £1.55, but only the 55p is written down, giving £18.55 instead of £19.55. £10.05 comes from buying only one plant instead of four, using £3.20 + £6.75.)
Build your own mix at the worksheet builder.