Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.A spreadsheet shows that 812 − 397 = 315. Work out an estimate for 812 − 397, by rounding each number to the nearest 100, to check whether the spreadsheet's answer is reasonable.
- 2.Work out 2 × 3 × 5 + 1 and decide whether the result is a prime number.
- 3.A rectangular patio measures 90 cm by 120 cm. Ben wants to cover it exactly with identical square tiles, as large as possible, with no tiles cut. Work out the side length of the largest square tile he can use.
- 4.Write 60 as a product of its prime factors, using index notation.
- 5.Work out the value of .
- 6.In standard form, 2,000 is written as 2 × 10ⁿ. Write down the value of n.
- 7.In a youth club the number of girls is 2/3 of the number of boys. What fraction of the members of the club are girls?
- 8.Work out how many factors 36 has.
- 9.A box stands on a table. The box exerts a force of 240 N on the table, and the base of the box has an area of 0.8 m². Work out the pressure the box exerts on the table, in N/m².
- 10.Write 0.36 as a fraction in its simplest form.
- 11.Work out the value of (1/3)⁻²
- 12.Work out 3.7 × 24.
- 13.Four students each estimate √70 without a calculator. Ben says: '8² = 64 and 9² = 81, and 70 is about a third of the way from 64 to 81, so √70 ≈ 8.3.' Chloe says: '8.5² = 72.25, which is close to 70 but a little too big, so I'll bring it down slightly to √70 ≈ 8.4.' Dan says: '9² = 81 is closer to 70 than 8² = 64 is, so √70 ≈ 8.9.' Ella says: '8² = 64 and 9² = 81, so I'll just take the midpoint of 8 and 9: √70 ≈ 8.5.' Given that √70 = 8.3666... to 4 decimal places, whose estimate is closest?
- 14.Which of these is written correctly in standard form?
- 15.The decimal 0.272727... repeats the block 27 for ever. Write 0.27 recurring as a fraction in its simplest form.
Answer key
- (b) 400 — Method: round each number to the nearest 100, then subtract the rounded values. Working: 812 rounds to 800 (nearest 100) and 397 rounds to 400 (nearest 100). 800 − 400 = 400. Answer: 400. 500 comes from rounding 397 down to 300 instead of up to the nearest 100, 400. 300 comes from rounding 812 down to 700 instead of up to the nearest 100, 800. 415 is the exact value of 812 − 397, found without rounding first, so it is not an estimate — the spreadsheet's answer of 315 is too far from the estimate of 400 to be correct.
- (d) 31, which is prime — Method: work out the value, remembering that multiplication comes before addition, then test it for primality by dividing by each prime up to its square root. Working: 2 × 3 × 5 = 30, so the value is 30 + 1 = 31. Since 6² = 36 is larger than 31, only 2, 3 and 5 need testing: 31 is odd, 31 ÷ 3 leaves a remainder of 1, and 31 does not end in 0 or 5. It therefore has exactly two factors, 1 and itself. Answer: 31, which is prime. The distractors: 30, which is not prime comes from working out 2 × 3 × 5 and forgetting to add the 1; the claim that 31 = 1 × 31 makes it non-prime comes from treating any factor pair as proof, forgetting that a prime is allowed the pair 1 and itself; the claim that 31 is a multiple of 3 comes from assuming that a number containing the digit 3 divides by 3, when in fact 31 ÷ 3 leaves a remainder.
- (a) 30 cm — The tile's side length must be a common factor of 90 and 120. The factors of 90 include 1, 2, 3, 5, 6, 9, 10, 15, 18, 30, 45, 90; the factors of 120 include 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 20, 24, 30, 40, 60, 120. The highest number common to both lists is 30, so the largest square tile has a side length of 30 cm. Picking 15 cm, a common factor but not the largest, gives tiles that are smaller than necessary. Picking 10 cm, also a common factor but smaller still, wastes even more of the possible tile size. Working out the lowest common multiple instead of the highest common factor gives 360 cm, a length far bigger than either side of the patio. So the largest square tile Ben can use has a side length of 30 cm.
- (b) 2² × 3 × 5 — Repeatedly divide 60 by prime numbers: 60 ÷ 2 = 30, 30 ÷ 2 = 15, 15 ÷ 3 = 5, and 5 is itself prime. So 60 is 2 × 2 × 3 × 5, which in index notation is 2² × 3 × 5. Stopping the factor tree after only three divisions and writing 2 × 3 × 5 misses that the 2 divides in twice, and gives only 30, not 60. Squaring the 3 as well as the 2 gives 2² × 3² × 5, which comes to 180, far too big. Squaring the 5 instead of the 2 gives 2 × 3 × 5², which comes to 150, also too big. So 60 = 2² × 3 × 5.
- (c) 0.001 — Method: a negative index means 'one over' the positive power, so $10^{-3}$ means one over $10^{3}$. Working: ten cubed is 1000, and one over 1000 is 0.001. 1000 comes from ignoring the negative sign and working out ten cubed instead of its reciprocal. −1000 comes from ignoring what the negative index does to the size, while still writing a negative sign on the large value. −0.001 comes from correctly finding the size, 0.001, but wrongly keeping a negative sign because the index was negative. Answer: 0.001.
- (c) 3 — Method: the index counts how many times the coefficient has been multiplied by 10, which is the number of places the decimal point moves from the end of the number to just after the first significant digit. Working: 2,000 = 2 × 1,000, and 1,000 = 10 × 10 × 10, which is three tens. Answer: 3. The distractors: 4 comes from counting the four digits of 2,000 rather than the three places the decimal point moves; 2 comes from copying the coefficient 2 into the index; −3 comes from making the index negative, which would describe a number smaller than 1 rather than two thousand.
- (b) 2/5 — The statement compares girls with boys, so girls : boys = 2 : 3. The club is therefore 2 + 3 = 5 equal shares and the girls take 2 of them, so 2/5 of the members are girls. 2/3 repeats the part-to-part fraction the question gives, 3/5 is the fraction that are boys, and 1/3 comes from treating 2/3 as a fraction of the whole club and taking what is left.
- (d) 9 — List all the factors of 36 in pairs that multiply to give 36: 1 × 36, 2 × 18, 3 × 12, 4 × 9, and 6 × 6. This gives the factors 1, 2, 3, 4, 6, 9, 12, 18 and 36 — nine factors in total, with 6 counted only once even though it appears in a pair with itself. Forgetting that 36 is itself a factor of 36 and leaving it off the list gives 8. Counting the number of factor pairs, five of them, rather than the number of individual factors gives 5. Treating the repeated pair 6 × 6 as two separate factors, 6 and 6 again, gives 10 instead of 9. So 36 has 9 factors.
- (a) 300 N/m² — Pressure is force ÷ area, and the unit N/m² says so: newtons divided by square metres. The calculation is 240 ÷ 0.8. Multiplying both numbers by 10 clears the decimal: 2400 ÷ 8 = 300 N/m². 192 N/m² multiplies the force by the area instead of dividing, 30 N/m² divides by 8 and so loses the decimal point, and 3000 N/m² multiplies only the force by 10 when clearing the decimal.
- (b) 9/25 — Method: write the decimal over the matching power of ten, then divide the numerator and the denominator by their highest common factor. Working: 0.36 has two digits after the point, so 0.36 = 36/100; the highest common factor of 36 and 100 is 4, and 36 ÷ 4 = 9 with 100 ÷ 4 = 25; since 9 and 25 share no factor greater than 1, the fraction is fully cancelled. Answer: 9/25. The distractors: 3/10 comes from reading only the first digit after the point and converting 0.3; 9/50 comes from dividing the numerator by 4 but the denominator by only 2; 36/10 comes from counting one decimal place instead of two and writing the digits over 10.
- (b) 9 — Method: a negative index means take the reciprocal of the base first and then apply the positive power. Working: the reciprocal of 1/3 is 3, so (1/3)⁻² = 3² = 3 × 3 = 9. Answer: 9. The distractors: 1/9 comes from ignoring the minus sign and squaring 1/3 as it stands; −9 comes from reading the negative index as a minus sign on the result; 6 comes from multiplying the denominator by the index, 3 × 2, instead of squaring the reciprocal.
- (b) 88.8 — Multiply as whole numbers first, ignoring the decimal point: 37 × 24. Split it as 37 × 20 = 740 and 37 × 4 = 148, so 37 × 24 = 740 + 148 = 888. 3.7 has 1 decimal place and 24 has none, so the answer needs 1 decimal place: 88.8. Counting the 2 digits in "3.7" as though that were the number of decimal places gives 8.88 instead of 1 decimal place. Leaving the decimal point out altogether gives 888. Misreading 37 × 4 as 138 rather than 148 gives a running total of 878, placed with 1 decimal place as 87.8. So 3.7 × 24 = 88.8.
- (b) Chloe's estimate — √70 = 8.3666... to 4 decimal places. Comparing each estimate against this: Ben's 8.3 is 0.0666 away; Chloe's 8.4 is only 0.0334 away; Dan's 8.9 is 0.5334 away; Ella's 8.5 is 0.1334 away. Chloe's estimate is closest, because her method tests an actual calculation, 8.5² = 72.25, sees that it overshoots 70, and corrects slightly downward from it, rather than only comparing which perfect square is nearer. Ben's sharing-out is not a bad idea in itself — 70 sits 6 of the way along the 17 from 64 to 81, so 'about a third of the way' from 8 to 9 points at roughly 8.35 — but he then rounds that position down to 8.3, and it is that rounding, not the sharing-out, that leaves him twice as far from √70 as Chloe. Dan's claim that 81 is closer to 70 than 64 is is backwards: 70 − 64 = 6, while 81 − 70 = 11, so 64 is in fact the nearer square, which makes his estimate of 8.9 the furthest from the truth of all four. Ella's plain midpoint of 8 and 9 tests nothing at all: √70 does not sit halfway between 8 and 9, and her 8.5 lands further from √70 than Chloe's checked estimate does.
- (a) 7.5 × 10⁴ — Standard form is A × 10ⁿ, where A is between 1 and 10 (1 ≤ A < 10) and n is an integer — 7.5 × 10⁴ satisfies all of this. 12 × 10³ fails because 12 is not below 10. 0.5 × 10⁴ fails because 0.5 is not at least 1. 6.2 × 4⁵ fails because standard form always uses a power of 10, not a power of 4.
- (c) 3/11 — Method: let a letter stand for the recurring decimal, multiply by the power of ten that shifts exactly one repeating block past the point, subtract the original equation so that the recurring tail cancels, then solve and cancel. Working: let x = 0.272727...; the repeating block is two digits long, so multiply by 100 to give 100x = 27.272727...; subtracting gives 99x = 27, so x = 27/99; the highest common factor of 27 and 99 is 9, and 27 ÷ 9 = 3 with 99 ÷ 9 = 11. Answer: 3/11. The distractors: 27/100 comes from writing the repeating block over 100 instead of over 99, forgetting that subtracting x leaves 99x rather than 100x; 3/10 comes from rounding the decimal to one place and converting 0.3; 2/9 comes from treating only the 2 as recurring and converting 0.222... instead.
Build your own mix at the worksheet builder.