Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- 1.The number 36 can be written as 2² × 3², and the number 84 can be written as 2² × 3 × 7. Work out the highest common factor of 36 and 84.
- 2.A measuring jug shows a volume of 340 ml, correct to the nearest 20 ml. Work out the smallest possible volume in the jug.
- 3.Work out (−36) ÷ (−6) × 2
- 4.Rationalise the denominator of 6/√3, giving your answer in its simplest form.
- 5.A three-digit code is made using the digits 1, 2 and 3, and each digit may be used more than once. Work out how many different three-digit codes can be made.
- 6.Work out the reciprocal of (2 + 3)
- 7.Write 5,000,000 in standard form.
- 8.A number, x, is truncated (not rounded) to 1 decimal place and the result is 6.2. Write down the error interval for x.
- 9.A grain of fine sand has a mass of 0.001 grams. Write this mass in standard form.
- 10.Light travels at 3 × 10⁸ metres per second. Work out how far light travels in 2 × 10⁻⁶ seconds. Give your answer in standard form.
- 11.A number, n, is a multiple of both 6 and 9. Work out the smallest possible value of n that is greater than 20.
- 12.Work out 3/7 × 14/9. Give your answer as a fraction in its simplest form.
- 13.Work out (−2)² − 3
- 14.A pizza is cut into 12 equal slices. Ben eats 5 slices and Mia eats 3 slices. What fraction of the pizza is left, giving your answer in its simplest form?
- 15.Which of these statements about −0.7 and −0.25 is true?
Answer key
- (a) 12 — Compare the powers of each prime that appears in both factorisations. In 2² × 3² and 2² × 3 × 7, the prime 2 appears with power 2 in both, and the prime 3 appears with power 2 in one and only power 1 in the other — take the lower power, 3¹. Multiplying the shared primes at their lower powers, 2² × 3, gives 12. Using power 1 for both primes instead of comparing the powers properly, 2 × 3, gives 6, which misses that 2 is common at power 2, not power 1. Multiplying the primes at their higher powers and including 7, which only appears in 84, gives 2² × 3² × 7, which comes to 252 — this is the lowest common multiple, not the highest common factor. Only spotting that 3 is a common prime and overlooking that 2 is common as well gives 3. So the highest common factor of 36 and 84 is 12.
- (a) 330 ml — Correct to the nearest 20 ml means the true volume could be up to 10 ml (half of 20) either side of 340 ml. The smallest possible volume is 340 − 10 = 330 ml. A candidate who subtracted the full 20 ml instead of half of it worked out 340 − 20 = 320 ml. A candidate who added instead of subtracted, finding the largest possible volume instead of the smallest, worked out 340 + 10 = 350 ml. A candidate who halved the interval again by mistake, using 5 ml instead of 10 ml, worked out 340 − 5 = 335 ml.
- (c) 12 — Method: division and multiplication have equal priority, so they are carried out in the order they are written, from left to right; a negative divided by a negative is positive. Working: (−36) ÷ (−6) = 6, and then 6 × 2 = 12. Answer: 12. The distractors: 3 comes from carrying out the multiplication first, (−6) × 2 = −12 followed by (−36) ÷ (−12) = 3; −12 comes from treating a negative divided by a negative as negative, giving −6 and then −6 × 2 = −12; 6 comes from stopping at the division and never carrying out the multiplication by 2.
- (a) 2√3 — Multiply the top and bottom of the fraction by √3, since √3 × √3 = 3: 6/√3 = (6 × √3)/(√3 × √3) = 6√3/3. Dividing 6 by 3 gives 2, so the fraction simplifies to 2√3. Multiplying only the numerator by √3 and then cancelling the surd in the denominator against it as if they were the same term, without properly squaring the denominator, leads to 6. Dividing 6 by 3 as 3 instead of 2 gives 3√3 — a slip in the final division. Simplifying 6√3/3 by cancelling the whole numerator's 3 with the denominator's 3, including the surd, gives 2, which loses the surd altogether.
- (c) 27 — Each of the 3 digits can be chosen independently for each of the 3 positions, so multiply: 3 × 3 × 3 = 27. 9 comes from multiplying only two of the three positions, 3 × 3, and forgetting the third. 6 comes from working out 3 × 2 × 1 = 6, which counts codes where digits do not repeat, but the question allows repeated digits. 3 comes from considering only one digit position.
- (a) 1/5 — Work out the bracket first: 2 + 3 = 5. The reciprocal of 5 is 1/5. A candidate who forgot to take the reciprocal and just gave the value of the bracket wrote 5. A candidate who took the reciprocal but made a sign error wrote −1/5. A candidate who found the reciprocal of each number separately and added them, treating reciprocal as if it distributes over addition, worked out 1/2 + 1/3 = 5/6.
- (c) 5 × 10⁶ — Method: standard form is written as A × 10ⁿ, where A is at least 1 and less than 10 and n counts the places the decimal point moves. Working: the digits of 5,000,000 give a coefficient of A = 5, and the decimal point travels from the end of 5,000,000 until it sits just after the 5, a move of 6 places, so n = 6. Answer: 5 × 10⁶. The distractors: 50 × 10⁵ comes from stopping before the coefficient has been brought into range, and 50 is not less than 10, so it is not standard form; 5 × 10⁷ comes from counting the seven digits of 5,000,000 instead of the six places the decimal point moves; 5 × 10⁻⁶ comes from making the index negative because the decimal point was carried to the left, when a negative index belongs to a number smaller than 1.
- (b) 6.2 ≤ x < 6.3 — Truncating simply cuts off the digits after the required decimal place instead of rounding them, so every value from 6.2 up to (but not reaching) 6.3 truncates to 6.2. This gives the error interval 6.2 ≤ x < 6.3, with no allowance made on the lower side because truncation never rounds a smaller value up into this interval. Using 6.15 ≤ x < 6.25 applies the rounding rule of going half a unit either side, which does not apply to truncation. Writing 6.1 < x ≤ 6.2 puts the interval below 6.2 instead of above it. Writing 6.2 ≤ x ≤ 6.3 wrongly includes 6.3, which truncates down to itself, not to 6.2.
- (d) 1 × 10⁻³ — Method: for a number smaller than 1 the index is negative, and it counts the places the decimal point moves to the right to leave a coefficient between 1 and 10. Working: the only significant digit is 1, so the coefficient is 1; the decimal point in 0.001 moves three places to the right to reach that 1, so the index is −3. Answer: 1 × 10⁻³. The distractors: 1 × 10³ comes from taking the index as positive, which describes one thousand grams rather than one thousandth of a gram; 0.1 × 10⁻² is the same mass written with a coefficient of 0.1, which is smaller than 1 and so is not standard form; 1 × 10⁻⁴ comes from counting the zero in front of the decimal point as well as the places after it.
- (a) 6 × 10² metres — Method: distance = speed × time, so multiply the coefficients and add the indices. Working: 3 × 2 = 6 for the coefficients, and 8 + (−6) = 2 for the indices; 6 lies between 1 and 10, so the coefficient needs no adjustment. Answer: 6 × 10² metres, which is 600 metres. The distractors: 5 × 10² metres comes from adding the coefficients, 3 + 2, instead of multiplying them; 6 × 10¹⁴ metres comes from subtracting the indices, 8 − (−6), which is the rule for dividing rather than for multiplying; 6 × 10⁻⁴⁸ metres comes from multiplying the indices, 8 × (−6), instead of adding them.
- (a) 36 — Method: find the lowest common multiple of 6 and 9, then move up the list of common multiples until one is greater than 20. Working: the common multiples of 6 and 9 are 18, 36, 54 …. 18 is not greater than 20, so the next one, 36, is the smallest value of n that is greater than 20. 18 is the lowest common multiple itself, but it fails the 'greater than 20' condition. 54 is the common multiple after 36, one step too far. 27 is a multiple of 9 but not of 6, since 27 ÷ 6 is not a whole number. Answer: 36.
- (c) 2/3 — Method: multiply the numerators together and the denominators together, then divide both parts of the result by their highest common factor. Working: 3 × 14 = 42 and 7 × 9 = 63, giving 42/63; the highest common factor of 42 and 63 is 21, and 42 ÷ 21 = 2 with 63 ÷ 21 = 3. Answer: 2/3. The distractors: 17/16 comes from adding the numerators and adding the denominators, giving (3 + 14)/(7 + 9); 27/98 comes from turning the second fraction upside down and multiplying, which divides instead of multiplying and gives 3/7 × 9/14; 2/21 comes from cancelling the 7 into the 14 in the numerator but leaving the 7 in the denominator, giving 6/63.
- (b) 1 — Method: BIDMAS deals with the index before the subtraction, and a negative number multiplied by itself gives a positive result. Working: (−2)² = (−2) × (−2) = 4, so the calculation becomes 4 − 3 = 1. Answer: 1. The distractors: −7 comes from squaring only the 2 and leaving the minus sign outside the index, giving −(2²) − 3 = −4 − 3 = −7; −1 comes from subtracting the square from 3 instead of 3 from the square, giving 3 − 4 = −1; 25 comes from carrying out the subtraction before the index, giving (−2 − 3)² = (−5)² = 25.
- (a) 1/3 — Method: find the total fraction eaten, then subtract it from the whole pizza. Working: together they eat 5/12 + 3/12 = 8/12, so the fraction left is 12/12 − 8/12 = 4/12 = 1/3. Answer: 1/3. 2/3 comes from giving the fraction eaten instead of the fraction left. 7/12 comes from only subtracting Ben's slices and forgetting Mia's. 1/2 comes from comparing the 4 slices left with the 8 slices eaten, 4/8, a part-to-part comparison instead of comparing with the whole pizza of 12 slices.
- (b) −0.7 < −0.25 — Method: compare the two negative decimals by their distance from zero on a number line. Working: −0.7 is 0.7 away from zero and −0.25 is 0.25 away from zero, so −0.7 is further from zero in the negative direction, making it the smaller number. Answer: −0.7 < −0.25 is true. "−0.7 > −0.25" comes from comparing 0.7 and 0.25 as if both numbers were positive, ignoring the negative signs. "−0.7 = −0.25" comes from assuming the two numbers are equal because they are both negative decimals. "−0.7 ≥ −0.25" combines the false statement "−0.7 > −0.25" with the false statement "−0.7 = −0.25".
Build your own mix at the worksheet builder.