Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Calculator
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (b) 6.4 × 10⁸ — There are 5 letter positions, each with 23 choices, and 2 digit positions, each with 10 choices, and every position is independent because repeats are allowed. By the product rule, the total is 23⁵ × 10² = 6,436,343 × 100 = 643,634,300, which is 6.4 × 10⁸ to 2 significant figures. Using all 26 letters instead of the 23 that are actually allowed, ignoring the excluded letters entirely, gives 26⁵ × 10² = 1,188,137,600, which is 1.2 × 10⁹ to 2 significant figures. Adding the seven counts of choices instead of multiplying them, 23 + 23 + 10 + 10 + 23 + 23 + 23, gives 135, which is 1.4 × 10² to 2 significant figures — a total far too small for seven independent positions. Swapping which count of choices belongs to letters and which belongs to digits, working out 23² × 10⁵ instead of 23⁵ × 10², gives 52,900,000, which is 5.3 × 10⁷ to 2 significant figures.
- (a) 40 — Method: a number is odd exactly when its units digit is odd, so the restricted position is filled first and the two free positions are then filled from the digits that are left, multiplying the number of choices at each stage. Working: of the six digits only 3 and 9 are odd, so there are 2 choices for the units digit; once that digit has been used, 5 digits remain for the hundreds position and then 4 remain for the tens position, so the count is 2 × 5 × 4 = 40. Answer: 40. The distractors: 120 comes from ignoring the word odd altogether and counting every three-digit number that can be made from the six digits, 6 × 5 × 4; 60 comes from filling the hundreds and tens positions first, 6 then 5, and only then allowing 2 odd digits for the units position, which overcounts because one of 3 and 9 may already have been used, giving 6 × 5 × 2; 72 comes from restricting the units digit to 3 or 9 correctly but overlooking the condition that no digit may be used twice, so all six digits are still counted as available for each of the other two positions, giving 2 × 6 × 6.
- (d) £4.80 — Method: find the error interval, then check which value falls outside it. Working: half of 20p is 10p, so the actual cost, c, satisfies £4.50 ≤ c < £4.70. £4.80 is above £4.70, so it could not be the actual cost. Answer: £4.80. (£4.50 is a genuine possible cost — it sits at the included lower boundary. £4.65 is a genuine possible cost, below the £4.70 upper boundary. £4.55 is a genuine possible cost, well inside the interval.)
- (b) £13.48 — Method: an amount of money is written to the nearest penny, which is 2 decimal places, so the calculator display has to be rounded to 2 decimal places. Working: 53.90 ÷ 4 = 13.475, and the digit in the third decimal place is 5, so the penny digit goes up from 7 to 8. Answer: £13.48. The distractors: £13.47 comes from chopping the third decimal place off instead of rounding with it; £13.50 comes from rounding to the nearest 10p rather than to the nearest penny; £13.40 comes from cutting the display short at 1 decimal place, which is both the wrong degree of accuracy and a truncation rather than a rounding.
- (a) 17 — Method: work out each power separately, then combine them as the question asks. Working: $2^3 = 8$ and $3^2 = 9$, and 8 + 9 = 17. 72 comes from working out 8 × 9 = 72, multiplying the two powers instead of adding them. 12 comes from misreading the powers as repeated multiplication of the base by the index, 2 × 3 + 3 × 2 = 6 + 6 = 12. −1 comes from working out 8 − 9 = −1, subtracting the powers instead of adding them. Answer: 17.
- (a) 0.55, 58%, 3/5 — Converting all three to decimals: 3/5 = 0.6, 0.55 stays as 0.55, and 58% = 0.58. In order from smallest to largest, this is 0.55, then 58%, then 3/5. Writing the numbers in the reverse order, largest to smallest, gives 3/5, 58%, 0.55. Misconverting 3/5 as 0.5 instead of 0.6 makes it appear smaller than both other values, giving the order 3/5, 0.55, 58%. Misconverting 58% as 0.058 instead of 0.58, by moving the decimal point two extra places, makes it appear smallest of the three, giving the order 58%, 0.55, 3/5.
- (b) 28 — Method: count the ordered choices with the product rule and then correct for the double counting, because the two captains have equal standing and so a pair is the same pair whichever captain is named first. Working: there are 8 players who could be named first and 7 who could be named second, giving 8 × 7 = 56 ordered choices; each pair has been counted twice, once in each order, so the number of pairs is 56 ÷ 2 = 28. Answer: 28. The distractors: 56 comes from stopping at 8 × 7 and never halving, which counts each pair of captains twice; 64 comes from working out 8 × 8, which allows the same player to be chosen as both captains; 16 comes from multiplying the 8 players by the 2 captaincies instead of pairing the players with one another.
- (b) 63 — 10% of 180 = 18, so 5% = 9. 35% = (3 × 18) + 9 = 54 + 9 = 63. A candidate who uses 25% instead of 35% gets 45. A candidate who doubles 35% to get 70% by mistake gets 126. A candidate who subtracts 35 from 180 instead of finding a percentage gets 145.
- (c) Sam is correct — The leading zeros in 0.070268 are not significant, so the first three significant figures are 7, 0 and 2. The next digit along is 6, and since 6 is 5 or more, the third significant figure rounds up from 2 to 3, giving 0.0703. This means Sam's answer is correct. Writing 0.070 keeps only 2 significant figures, one short of what was asked. Writing 0.0702 ignores the digit 6 that follows and leaves the third figure unrounded. Writing 0.0704 rounds the third figure up twice, as if a later digit had also pushed it up.
- (d) £6 — First find 30% of £200, which is £60, then find 10% of that: £60 × 0.1 = £6. Adding the two percentages together instead of applying them one after the other, 10% + 30% = 40%, and finding 40% of £200 gives £80. Finding 30% of £200 = £60 correctly but stopping before applying the second percentage leaves £60 as the final answer. Finding only 10% of the original £200, ignoring the 30% entirely, gives £20.
- (a) 4,000 nanometres — Method: the number of nanometres is the diameter divided by the length of one nanometre, and dividing powers of ten means subtracting the indices. Working: −6 − (−9) = 3, so 10⁻⁶ ÷ 10⁻⁹ = 10³, and the diameter is 4 × 10³ nanometres. Answer: 4,000 nanometres. The distractors: 400 nanometres comes from taking the difference between the indices as 2 instead of 3; 4 nanometres comes from changing the name of the unit without converting, leaving the coefficient untouched; 0.004 nanometres comes from dividing by 10³ instead of multiplying by it, as though a nanometre were the larger of the two units.
- (a) 3.84 × 10⁵ — 384,000 = 3.84 × 100,000 = 3.84 × 10⁵, with the decimal point moved five places and the coefficient kept between 1 and 10. Moving the point six places instead of five gives 3.84 × 10⁶, ten times too large. Leaving the coefficient as 38.4 gives 38.4 × 10⁴, which is not between 1 and 10. Using a negative exponent instead of a positive one gives 3.84 × 10⁻⁵, a number far smaller than 1.
- (a) 0.5, 0.55, 0.56, 0.6, 0.601 — Compare the decimals by giving them all the same number of decimal places first: 0.600, 0.550, 0.601, 0.500, 0.560. Ordering these from smallest to largest gives 0.500, 0.550, 0.560, 0.600, 0.601, which is 0.5, 0.55, 0.56, 0.6, 0.601. Comparing the digits as though they were whole numbers, reading 0.601 as "601" and 0.5 as "5", without padding to the same number of decimal places, gives the wrong order 0.5, 0.6, 0.55, 0.56, 0.601, because it ignores the place value of each digit. Ordering largest to smallest instead of smallest to largest, as the question asks, gives 0.601, 0.6, 0.56, 0.55, 0.5. Misreading the close values 0.55 and 0.56 and swapping them gives 0.5, 0.56, 0.55, 0.6, 0.601. So the correct order, smallest to largest, is 0.5, 0.55, 0.56, 0.6, 0.601.
- (c) 20p — Turn each price into the same rate before comparing. The small bag is 400 g = 0.4 kg, so it costs £1.12 ÷ 0.4 = £2.80 per kg. The large bag costs £3.90 ÷ 1.5 = £2.60 per kg. The saving is £2.80 − £2.60 = £0.20, which is 20p per kg. 2p compares the prices per 100 g rather than per kilogram, £2.78 subtracts one bag price from the other without turning either into a rate, and £2.60 is the large bag's price per kilogram rather than the saving.
- (a) The tape can only give the length to the nearest centimetre — Method: a measurement should never be written to a finer degree of accuracy than the instrument used can read. Working: the tape is marked in centimetres, so the smallest division Leah can read is 1 cm, which is 0.01 m and two decimal places in metres; writing 7.3157 m claims the length to the nearest tenth of a millimetre, four decimal places, which the markings cannot support. A record of 7.32 m, to the nearest centimetre, is what this tape justifies. Answer: The tape can only give the length to the nearest centimetre. The distractors: the nearest millimetre contradicts the markings described in the question, which are centimetres, and would still claim more accuracy than the tape offers; the rule that a length in metres must be written to 2 decimal places borrows the habit of writing money to the penny, when the accuracy of a length depends on the instrument; rounding to the nearest metre would throw away accuracy the tape genuinely provides.
Build your own mix at the worksheet builder.