Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (a) 1/16 — Method: terms can only be subtracted once they share a denominator, so write every term over the largest denominator, 16, and then subtract the numerators in order from left to right. Working: 1 = 16/16, 1/2 = 8/16, 1/4 = 4/16 and 1/8 = 2/16, so the numerators give 16 − 8 − 4 − 2 − 1 = 1, over a denominator of 16. Answer: 1/16. The distractors: 1/8 comes from stopping one term early, after 16 − 8 − 4 − 2 = 2; 3/16 comes from a sign slip on the last term, adding it instead of subtracting it, which gives 2 + 1 = 3; 15/16 comes from working from the right-hand end as though the last four terms were bracketed together, so that only a single sixteenth is taken away from 1.
- (c) 4.6 — Since 100 lies between 64 and 125, ∛100 lies between 4 and 5. Narrow it down: 4.6³ = 97.336, which is less than 100, so ∛100 is greater than 4.6. To decide how it rounds to 1 decimal place, test the midpoint: 4.65³ = 100.544, which is more than 100, so ∛100 is less than 4.65 and therefore rounds down to 4.6. Simply taking the midpoint of 4 and 5 without testing any cube gives 4.5. Going up to the next tenth because 4.6³ fell short of 100, without checking that 4.65³ already overshoots, gives 4.7. Comparing 100 with the two given cubes, 64 and 125, noticing that 100 is nearer to 125, and rounding straight to the nearest whole number gives 5.0 — but that comparison is between the cubes, not between the cube roots, and cubing stretches the gaps unevenly, so it says nothing about which value the cube root rounds to.
- (b) 3²⁰ is larger — Method: two powers with different bases and different indices can be compared once they are rewritten with a common index, which is possible whenever the indices share a factor. Working: 30 and 20 have a highest common factor of 10, so 2³⁰ = (2³)¹⁰ = 8¹⁰ and 3²⁰ = (3²)¹⁰ = 9¹⁰. Both are now tenth powers, and since 9 is larger than 8, 9¹⁰ is larger than 8¹⁰. Answer: 3²⁰ is larger. The distractors: 2³⁰ is larger comes from comparing only the indices and choosing the power with the bigger index; They are equal comes from multiplying base by index, 2 × 30 and 3 × 20, and finding 60 each time; They cannot be compared without a calculator comes from assuming that powers this large can only be ranked by evaluating them in full.
- (c) 2/5 — To find a fraction of a fraction, multiply them together: 3/5 × 2/3 = 6/15, which simplifies to 2/5. Multiplying only the numerators, 3 × 2 = 6, but adding the denominators, 5 + 3 = 8, instead of multiplying them gives 6/8, which simplifies to 3/4. Using only the fraction who study French, 3/5, and ignoring that a further fraction of them also study Spanish gives 3/5. Dividing by 2/3 instead of multiplying by it, using its reciprocal 3/2, gives 3/5 × 3/2 = 9/10.
- (c) 7 + 4√3 — Expand the brackets fully: (2 + √3)² = 2² + 2 × 2 × √3 + (√3)² = 4 + 4√3 + 3. Adding the two whole-number terms, 4 + 3 = 7, gives 7 + 4√3. Using (a + b)² = a² + b² and skipping the middle cross term entirely gives just 4 + 3 = 7, with no surd term at all. Treating (√3)² as if it stayed √3 rather than becoming 3, then merging it with the existing surd term, gives 4 + 5√3. Squaring only the surd term correctly but carrying the whole-number term as 2 instead of squaring it to 4 gives 2 + 3 + 4√3 = 5 + 4√3.
- (c) 1/x⁶ — Method: raising a power to another power multiplies the two indices, and a negative index means one over the matching positive power. Working: −2 × 3 = −6, so (x⁻²)³ = x⁻⁶, and x⁻⁶ written as a fraction is 1/x⁶. Answer: 1/x⁶. The distractors: x⁶ comes from multiplying the indices correctly but dropping the minus sign; 1/x⁵ comes from adding the sizes of the indices, 2 + 3, instead of multiplying them; −x⁶ comes from reading the negative index as a minus sign in front of the whole term.
- (a) 7 — Dividing by 0.1 is the same as multiplying by 10, so 0.7 ÷ 0.1 = 7. Meera's answer of 0.07 comes from dividing 0.7 by 10 instead of by 0.1, the wrong way round. A candidate who confuses 0.1 with 0.01 multiplies by 100 instead of 10 and gets 70. A candidate who thinks dividing by a number less than 1 does not change the value gets 0.7.
- (b) 30 — 70 is close to the perfect square 64, so √70 ≈ 8. 65 is close to the perfect cube 64, so ∛65 ≈ 4. Multiplying these estimates: 8 × 4 = 32, which rounds to 30 to 1 significant figure. Estimating ∛65 as 5 instead of 4, perhaps by confusing it with the nearby cube 125 = 5³ rather than the much closer 64 = 4³, and then multiplying by 8, gives 8 × 5 = 40. Adding the two estimates instead of multiplying them, 8 + 4 = 12, rounds to 10 to 1 significant figure. Rounding both estimates up to the next whole number using the wrong nearby power for each, taking √70 as 9 and ∛65 as 5, gives 9 × 5 = 45, which rounds to 50 to 1 significant figure.
- (d) −1.7 — Since the numbers have different signs, find the difference between their sizes: 4.5 − 2.8 = 1.7, then keep the sign of the number further from zero. So −4.5 + 2.8 = −1.7. A candidate who drops the negative sign gets 1.7. A candidate who adds the magnitudes instead of finding the difference gets −(4.5 + 2.8) = −7.3. A candidate who takes the smaller digit from the larger in the tenths column, doing 8 − 5 = 3 instead of borrowing to make 15 − 8 = 7, gets 2.3 and so −2.3.
- (b) £8 — Rounding to 1 significant figure: £1.85 rounds to £2, and 3.6 kg rounds to 4 kg. The estimate is £2 × 4 = £8. A candidate who used the unrounded values instead of estimating worked out 1.85 × 3.6 = £6.66. A candidate who rounded only the mass and used the exact price worked out 1.85 × 4 = £7.40. A candidate who rounded the price to the nearest 10p instead of 1 significant figure worked out 1.9 × 4 = £7.60.
- (a) 4,000 nanometres — Method: the number of nanometres is the diameter divided by the length of one nanometre, and dividing powers of ten means subtracting the indices. Working: −6 − (−9) = 3, so 10⁻⁶ ÷ 10⁻⁹ = 10³, and the diameter is 4 × 10³ nanometres. Answer: 4,000 nanometres. The distractors: 400 nanometres comes from taking the difference between the indices as 2 instead of 3; 4 nanometres comes from changing the name of the unit without converting, leaving the coefficient untouched; 0.004 nanometres comes from dividing by 10³ instead of multiplying by it, as though a nanometre were the larger of the two units.
- (a) 10 — √49 = 7 and ∛27 = 3, so √49 + ∛27 = 7 + 3 = 10. Treating the cube root as dividing by 3 instead of finding the cube root gives 27 ÷ 3 = 9, then 7 + 9 = 16. Multiplying the two roots instead of adding them gives 7 × 3 = 21. Ignoring the cube root symbol and using 27 as it stands gives 7 + 27 = 34.
- (d) 9 — List all the factors of 36 in pairs that multiply to give 36: 1 × 36, 2 × 18, 3 × 12, 4 × 9, and 6 × 6. This gives the factors 1, 2, 3, 4, 6, 9, 12, 18 and 36 — nine factors in total, with 6 counted only once even though it appears in a pair with itself. Forgetting that 36 is itself a factor of 36 and leaving it off the list gives 8. Counting the number of factor pairs, five of them, rather than the number of individual factors gives 5. Treating the repeated pair 6 × 6 as two separate factors, 6 and 6 again, gives 10 instead of 9. So 36 has 9 factors.
- (c) 0.0065 — Leading zeros are never significant, so counting from the first non-zero digit, the first two significant figures of 0.006482 are 6 and 4. Look at the next digit along, 8, to decide whether the second figure rounds up: since 8 is 5 or more, the 4 rounds up to 5, giving 0.0065. Rounding to 2 decimal places instead of 2 significant figures gives 0.01, which answers a different question. Wrongly counting one of the leading zeros as a significant figure and stopping one figure short gives 0.006. Keeping an extra digit, as in 0.00648, gives 3 significant figures rather than 2.
- (d) 1 × 10⁷ seconds — Method: the time for a journey is the distance divided by the speed, so round each number to 1 significant figure and then divide; dividing numbers in standard form means dividing the coefficients and subtracting the indices. Working: 3.1 × 10¹⁵ rounds to 3 × 10¹⁵ and 2.998 × 10⁸ rounds to 3 × 10⁸; 3 ÷ 3 = 1 for the coefficients, and 15 − 8 = 7 for the indices. Answer: about 1 × 10⁷ seconds. The distractors: 3 × 10⁷ seconds comes from subtracting the indices correctly but leaving the coefficient as 3 instead of dividing 3 by 3; 1 × 10⁻⁷ seconds comes from dividing the speed by the distance instead of the distance by the speed; 9 × 10²³ seconds comes from multiplying the two quantities instead of dividing them, since 3 × 3 = 9 and 15 + 8 = 23.
Build your own mix at the worksheet builder.