Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (b) 63 — 10% of 180 = 18, so 5% = 9. 35% = (3 × 18) + 9 = 54 + 9 = 63. A candidate who uses 25% instead of 35% gets 45. A candidate who doubles 35% to get 70% by mistake gets 126. A candidate who subtracts 35 from 180 instead of finding a percentage gets 145.
- (a) 2² × 3 — Method: divide repeatedly by the smallest prime that goes in, until 1 is reached, then write the primes used as a product with indices. Working: 12 ÷ 2 = 6, 6 ÷ 2 = 3 and 3 ÷ 3 = 1, so the primes used are 2, 2 and 3, which is written as 2² × 3. Answer: 2² × 3. The distractors: 2 × 6 comes from stopping at the first factor pair without splitting the 6, which is not prime; 2 × 3 comes from listing each prime once and losing the repeat, and it multiplies to 6 rather than 12; 2 × 3² puts the index on the wrong prime and multiplies to 18.
- (c) 9/5 — Method: the area of a rectangle is its length multiplied by its width; the decimal product is then written over a power of ten and cancelled. Working: 24 × 75 = 1800, and 2.4 and 0.75 have three decimal places between them, so 2.4 × 0.75 = 1.8; the area of the panel is 1.8 square metres, which is eighteen tenths, so it can be written as 18/10, and dividing the numerator and the denominator by 2 gives 9 over 5. Answer: 9/5. The distractors: 4/5 comes from converting only the digits after the decimal point and losing the whole one, turning 1.8 into eight tenths; 63/20 comes from adding the two sides instead of multiplying them, giving 3.15; 9/50 comes from misplacing the decimal point in the product and writing 0.18, which cancels to 9 over 50.
- (c) 9 — Method: factors come in pairs that multiply to give the number, so work through the pairs in order; a factor paired with itself is counted only once. Working: the pairs are 1 × 100, 2 × 50, 4 × 25, 5 × 20 and 10 × 10. The first four pairs give eight different factors, and the last pair adds only one more, so the factors are 1, 2, 4, 5, 10, 20, 25, 50 and 100. Answer: 9. The distractors: 10 comes from counting the pair 10 × 10 as two separate factors; 8 comes from leaving 1 out of the list, on the view that 1 is not a proper factor; 4 comes from writing 100 = 2² × 5² and multiplying the two indices together instead of adding 1 to each index first.
- (a) 40 — Method: a number is odd exactly when its units digit is odd, so the restricted position is filled first and the two free positions are then filled from the digits that are left, multiplying the number of choices at each stage. Working: of the six digits only 3 and 9 are odd, so there are 2 choices for the units digit; once that digit has been used, 5 digits remain for the hundreds position and then 4 remain for the tens position, so the count is 2 × 5 × 4 = 40. Answer: 40. The distractors: 120 comes from ignoring the word odd altogether and counting every three-digit number that can be made from the six digits, 6 × 5 × 4; 60 comes from filling the hundreds and tens positions first, 6 then 5, and only then allowing 2 odd digits for the units position, which overcounts because one of 3 and 9 may already have been used, giving 6 × 5 × 2; 72 comes from restricting the units digit to 3 or 9 correctly but overlooking the condition that no digit may be used twice, so all six digits are still counted as available for each of the other two positions, giving 2 × 6 × 6.
- (d) 9 — List all the factors of 36 in pairs that multiply to give 36: 1 × 36, 2 × 18, 3 × 12, 4 × 9, and 6 × 6. This gives the factors 1, 2, 3, 4, 6, 9, 12, 18 and 36 — nine factors in total, with 6 counted only once even though it appears in a pair with itself. Forgetting that 36 is itself a factor of 36 and leaving it off the list gives 8. Counting the number of factor pairs, five of them, rather than the number of individual factors gives 5. Treating the repeated pair 6 × 6 as two separate factors, 6 and 6 again, gives 10 instead of 9. So 36 has 9 factors.
- (b) 17 — Roots and powers are worked out first: √25 = 5 and 4² = 16. Division comes next: 12 ÷ 3 = 4. Then addition and subtraction, left to right: 5 + 16 − 4 = 17. A candidate who treated 4² as 4 × 2 = 8, multiplying the base by the exponent instead of squaring it, worked out 5 + 8 − 4 = 9. A candidate who did not evaluate the root and used 25 itself worked out 25 + 16 − 4 = 37. A candidate who ignored the priority of division and worked through 5 + 16 − 12 ÷ 3 strictly left to right got 5 + 16 = 21, then 21 − 12 = 9, then 9 ÷ 3 = 3.
- (a) 7 — Convert the mixed number to an improper fraction: 5 1/4 = 21/4. Dividing by 3/4 means multiplying by its reciprocal, 4/3: 21/4 × 4/3 gives 84/12, which simplifies to 7. So exactly 7 complete pieces of 3/4 m can be cut. Ignoring the 1/4 m and dividing only the whole number, 5 ÷ 3/4, gives 20/3, which is 6 complete pieces with some wood left over. Multiplying by 3/4 instead of its reciprocal, 21/4 × 3/4, gives 63/16, which is 3 complete pieces. Misreading 5 1/4 as the fraction 5/4, then dividing by 3/4, gives 5/3, which is only 1 complete piece. So 7 complete pieces can be cut from the plank.
- (a) 200 g — One quarter of 160 g is 40 g. Increasing the amount means adding this on: 160 + 40 = 200 g. Finding the increase, 1/4 of 160 = 40 g, but stopping there without adding it to the original amount leaves just 40 g. Using 4/5 instead of 5/4 as the scaling fraction, 160 × 4/5 = 128 g, actually decreases the amount rather than increasing it. Increasing by a half instead of a quarter, 160 + 80 = 240 g, uses the wrong fraction of 160.
- (a) 4,000 nanometres — Method: the number of nanometres is the diameter divided by the length of one nanometre, and dividing powers of ten means subtracting the indices. Working: −6 − (−9) = 3, so 10⁻⁶ ÷ 10⁻⁹ = 10³, and the diameter is 4 × 10³ nanometres. Answer: 4,000 nanometres. The distractors: 400 nanometres comes from taking the difference between the indices as 2 instead of 3; 4 nanometres comes from changing the name of the unit without converting, leaving the coefficient untouched; 0.004 nanometres comes from dividing by 10³ instead of multiplying by it, as though a nanometre were the larger of the two units.
- (b) 3 — Method: solving an index equation like this means finding how many factors of the base multiply together to give the number on the right. Working: 4¹ = 4, 4² = 16 and 4³ = 64, so three factors of 4 are needed. Answer: 3. The distractors: 4 comes from listing 4, 16 and 64 and counting the base itself as a step, which gives one more than the index; 6 comes from solving the equation with 2 as the base instead of 4, since 2⁶ = 64; 16 comes from dividing 64 by 4, treating the index as an instruction to divide.
- (a) 0 — Method: BIDMAS works through the index first, then the multiplication, then the subtraction. Working: 5² = 25, then 4 × 25 = 100, and finally 100 − 100 = 0. Answer: 0. The distractors: 2400 comes from working from left to right and subtracting first, giving (100 − 4) × 25 = 96 × 25 = 2400; −300 comes from multiplying before applying the index, giving (4 × 5)² = 20² = 400 and then 100 − 400 = −300; 60 comes from reading 5² as 5 × 2 = 10, so that 4 × 10 = 40 and 100 − 40 = 60.
- (c) 5 × 10⁻³ — Method: in standard form the coefficient must be at least 1 and less than 10, and for a number smaller than 1 the index is negative and counts the places the decimal point moves to the right. Working: the only significant digit is 5, so the coefficient is 5; moving the decimal point in 0.005 three places to the right gives 5, so the index is −3. Answer: 5 × 10⁻³. The distractors: 0.5 × 10⁻² is the same value written the wrong way, because 0.5 is smaller than 1 and so is not an allowed coefficient; 5 × 10⁻² comes from counting the two zeros after the decimal point instead of the three places the point moves; 5 × 10³ comes from taking the index as positive, which describes a number in the thousands rather than one smaller than 1.
- (a) 2/3 — Total parts = 6 + 4 + 5 = 15. Sopranos and altos together are not tenors: 6 + 4 = 10 parts, so the fraction is 10/15, which simplifies to 2/3. 1/3 comes from finding the fraction of tenors instead of the fraction that is not tenors. 2/5 comes from counting only the sopranos as not tenors and leaving the altos out. 4/9 comes from leaving sopranos out of the total, 4 + 5 = 9, and then using only the altos as the fraction that is not tenors.
- (b) 1 : 2 — 2/5 of 50 is 20, so there are 20 red counters and 50 − 20 = 30 blue counters. Taking 5 red counters out leaves 15 red and 30 blue, so red : blue = 15 : 30. Dividing both parts by 15 gives 1 : 2. 2 : 3 is the ratio before any counters are removed, 2 : 1 has the two parts the wrong way round, and 4 : 5 comes from taking the 5 counters out of the blue instead of the red.
Build your own mix at the worksheet builder.