Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (a) 6 — Method: the two scoops sit in different places on the cone, so a cone is an ordered choice; the possibilities can be listed systematically or counted by multiplying the choices available at each stage. Working: there are 3 flavours for the bottom scoop, and once that flavour is used only 2 flavours remain for the top scoop, so there are 3 × 2 = 6 cones; listing them confirms this, since vanilla on the bottom allows mango or pistachio on top, mango on the bottom allows vanilla or pistachio, and pistachio on the bottom allows vanilla or mango. Answer: 6. The distractors: 3 comes from treating the two scoops as interchangeable, so that vanilla under mango and mango under vanilla are counted as one cone; 9 comes from allowing the same flavour to be used for both scoops, giving 3 × 3; 5 comes from adding the 3 choices for the bottom scoop to the 2 choices left for the top scoop instead of multiplying them.
- (b) 6.2 ≤ x < 6.3 — Truncating simply cuts off the digits after the required decimal place instead of rounding them, so every value from 6.2 up to (but not reaching) 6.3 truncates to 6.2. This gives the error interval 6.2 ≤ x < 6.3, with no allowance made on the lower side because truncation never rounds a smaller value up into this interval. Using 6.15 ≤ x < 6.25 applies the rounding rule of going half a unit either side, which does not apply to truncation. Writing 6.1 < x ≤ 6.2 puts the interval below 6.2 instead of above it. Writing 6.2 ≤ x ≤ 6.3 wrongly includes 6.3, which truncates down to itself, not to 6.2.
- (c) 693 — Method: multiplying a bracket by a number multiplies every term inside it, so 7 × (100 − 1) = 7 × 100 − 7 × 1. Working: 7 × 100 = 700 and 7 × 1 = 7, so the calculation becomes 700 − 7 = 693. Answer: 693. The distractors: 699 comes from subtracting the 1 itself rather than 7 lots of it, giving 700 − 1 = 699; 707 comes from adding the second product instead of subtracting it, giving 700 + 7 = 707; 700 comes from rounding 99 up to 100 and then offering the estimate 7 × 100 as an exact value.
- (a) 5 — 16 + 9 = 25, then √25 = 5. Splitting the root over the addition instead gives √16 = 4 and √9 = 3, then 4 + 3 = 7 — but a root does not split over a sum like this. Multiplying those two roots instead of adding them gives 4 × 3 = 12. Taking the negative square root instead of the positive one gives −5.
- (a) 8.15 ≤ y < 8.25 — Rounding to 1 decimal place means the error interval spans half of 0.1, so 0.05, either side of 8.2: 8.2 − 0.05 = 8.15 and 8.2 + 0.05 = 8.25. The lower bound uses ≤ because 8.15 itself rounds to 8.2, but the upper bound uses < because 8.25 would round up to 8.3. So the error interval is 8.15 ≤ y < 8.25. A candidate who used the wrong rounding band gave 8.1 ≤ y < 8.2. A candidate who used a strict inequality at both ends wrote 8.15 < y < 8.25, wrongly excluding 8.15 itself. A candidate who added the full 0.1 instead of half of it wrote 8.2 ≤ y < 8.3.
- (d) 1 7/12 — Method: convert both mixed numbers to improper fractions with a common denominator, then subtract. Working: 3 1/4 = 39/12 and 1 2/3 = 20/12, so 39/12 − 20/12 = 19/12 = 1 7/12. Answer: 1 7/12. Chloe's method, subtracting whole numbers (3−1=2) and fraction parts (2/3−1/4=5/12) separately without exchanging, gives 2 5/12. 1 3/4 comes from converting 2/3 to twelfths incorrectly as 6/12 instead of 8/12, then subtracting. 8 comes from converting both mixed numbers to improper fractions correctly (13/4 and 5/3) but then subtracting numerators and denominators separately: (13−5)/(4−3) = 8/1.
- (a) 0 — Method: BIDMAS works through the index first, then the multiplication, then the subtraction. Working: 5² = 25, then 4 × 25 = 100, and finally 100 − 100 = 0. Answer: 0. The distractors: 2400 comes from working from left to right and subtracting first, giving (100 − 4) × 25 = 96 × 25 = 2400; −300 comes from multiplying before applying the index, giving (4 × 5)² = 20² = 400 and then 100 − 400 = −300; 60 comes from reading 5² as 5 × 2 = 10, so that 4 × 10 = 40 and 100 − 40 = 60.
- (a) 2.5 × 10⁷ — Method: place the decimal point so that the coefficient is at least 1 and less than 10, then count the places it has moved. Working: the digits give a coefficient of 2.5, and the decimal point travels from the end of 25,000,000 until it sits between the 2 and the 5, a move of 7 places. Answer: 2.5 × 10⁷. The distractors: 25 × 10⁶ is the same area but not in standard form, because the coefficient must be less than 10; 2.5 × 10⁸ comes from counting the eight digits of 25,000,000 instead of the seven places the decimal point moves; 2.5 × 10⁻⁷ comes from making the index negative because the decimal point was carried to the left.
- (c) An under-estimate, by 8 — Method: work out the exact product, then compare it with the estimate; an estimate that is smaller than the exact value is an under-estimate, and the difference between them is the size of the error. Working: 48 × 21 = 48 × 20 + 48 = 960 + 48 = 1,008, and 1,008 − 1,000 = 8, so the estimate falls short. Answer: an under-estimate, by 8. The distractors: an over-estimate by 8 has the size of the error right but the direction wrong, and comes from assuming that rounding 48 up to 50 must push the estimate above the exact value, without allowing for 21 being rounded down; an over-estimate by 19 comes from working out 48 × 21 as 48 × 20 + 21 = 981, adding a 21 where another 48 belongs; the claim that the estimate is exactly right comes from arguing that one number was rounded up and the other down, so the two changes must cancel.
- (a) 30 cm — The tile's side length must be a common factor of 90 and 120. The factors of 90 include 1, 2, 3, 5, 6, 9, 10, 15, 18, 30, 45, 90; the factors of 120 include 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 20, 24, 30, 40, 60, 120. The highest number common to both lists is 30, so the largest square tile has a side length of 30 cm. Picking 15 cm, a common factor but not the largest, gives tiles that are smaller than necessary. Picking 10 cm, also a common factor but smaller still, wastes even more of the possible tile size. Working out the lowest common multiple instead of the highest common factor gives 360 cm, a length far bigger than either side of the patio. So the largest square tile Ben can use has a side length of 30 cm.
- (d) 64 — Method: each time the power increases by 1, the value doubles, since one more 2 is multiplied in. Working: 2⁶ = 2⁵ × 2 = 32 × 2 = 64. Answer: 64. (37 comes from adding the power to the value, 32 + 5, instead of multiplying by the base. 192 comes from multiplying 32 by the new power, 6, instead of by the base, 2. 34 comes from adding the base to the value, 32 + 2, instead of multiplying.)
- (c) 2700 cm² — Convert both lengths to the same unit before multiplying: 0.6 m = 60 cm. The area is 45 × 60 = 2700 cm². Multiplying without converting 0.6 m to centimetres at all, treating it as 0.6 cm, gives 45 × 0.6 = 27 cm². Converting 0.6 m to centimetres by multiplying by 10 instead of 100 gives 6 cm, and 45 × 6 = 270 cm². Converting 0.6 m to centimetres by multiplying by 1000 instead of 100 gives 600 cm, and 45 × 600 = 27000 cm².
- (a) 3/5 — The question compares the rock albums directly with the pop albums, so write the rock part over the pop part: 3/5. 5/3 comes from writing the ratio the wrong way round, comparing pop with rock instead of rock with pop. 3/8 comes from comparing the rock albums with the total number of albums, 3 + 5 = 8, instead of with the pop albums. 5/8 comes from comparing the pop albums with the total number of albums instead of the rock albums with the pop albums.
- (a) 91 is not prime, because 91 = 7 × 13. — Check 91 for prime factors up to its square root, which is just under 10: 91 ÷ 7 = 13, and both 7 and 13 are prime, so 91 = 7 × 13 and 91 is not a prime number. Checking only 2, 3 and 5 misses that 7 also needs to be tried — 91 is odd, its digits do not sum to a multiple of 3 (9 + 1 = 10), and it does not end in 0 or 5, so those three checks alone wrongly suggest it is prime. Assuming any odd number ending in 1 must be prime ignores that 91 = 7 × 13 is a counterexample. Misapplying the digit-sum test for 3 by miscounting 9 + 1 as a multiple of 3 wrongly concludes 91 is divisible by 3, when the correct digit sum, 10, is not a multiple of 3. So 91 is not prime, because 91 = 7 × 13.
- (b) 11 — Method: roots and the multiplication are worked out before the addition and subtraction, and what is left is then worked through from left to right. Working: √144 = 12, √25 = 5 and 2 × 3 = 6, so the calculation becomes 12 − 6 + 5, which gives 6 + 5 = 11. Answer: 11. The distractors: 1 comes from carrying out the addition before the subtraction, giving 12 − (6 + 5) = 12 − 11 = 1; 35 comes from working from left to right with no priority, giving 12 − 2 = 10, then 10 × 3 = 30 and 30 + 5 = 35; 7 comes from combining the two roots as √(144 + 25) = √169 = 13 and then subtracting the product, giving 13 − 6 = 7.
Build your own mix at the worksheet builder.